Jump to content
SAU Community

Rb26 Pfc, Rb25/26 Harness Prewired For S14, Many Many Xtras !

stricnynel0s
 Share

Recommended Posts

stricnynel0s Collaborator

stricnynel0s

Posted
Posted

ITEM: Rb26 PFC, rb25/26 harness prewired for s14, coilpacks many xtras!!

PRICE: 1500

SHIPPING: yes, anywhere

DESCRIPTION:

Ok i am selling a complete Rb26 / 25 Electrical solution for a steal of a price. First A near new Apexi Power FC D Jetro, with the handcommander that has been modified to have a blue backlight instead of the green one(baller...). Next is a complete Rb26 Harness prewired for a S14, i am including with this a set of working coilpacks, the injector resistor wired into the harness, and an external rpm activated switch so this harness can be used on a rb25det. There is also a Z32 PTU (ignitor) pre wired in so no need to get costly ignitors anymore, and finally a Q45 MAF which is an upgrade to the stock one. This harness is plug and play for any s14. Finally as an xtra goodie i will throw in a HKS DLI I harness, so if can get a HKS DLI all your ignition problems will be solved regardless of HP(btw the supplied coils work 100%).

To Simplify all of that. Its a Harness that will work on rb25 or 26, with an upgraded AFM, ignitor, and resitor and included coil packs. An Apexi PFC Standalone with modified hand commander. An HKS DLI HARNESS (not actual DLI but useful if u get one), and finally as a last bit of good faith i will unclude two Rb26 02 Sensors for the harness.

I was currently using this on my RB25 with topfeed inj but i changed harness since i tucked my new one.

This is a steal i am only asking 1500 for all of that, the standalone is worth 1000 alone and the labor on harness is 400 not including the actual harness ( which is around 400), and i am giving you coils, dli harness, q45 afm, 02 sensors, and prewired ignitor upgrade

i am not really trying to part out, i am OBO on price and open to trades, but i wont be underhanded, if i trade i need kouki front end parts (lights, hood, fenders, radiator support, bumper support, radiator) or some rims that look nice and clear z32 front and rear brakes.

i can be reached at 732 552 1467 or email [email protected]

i live in NJ, and i will cover the shipping cost. i have an apexi avcr i will throw in the mix too for 200 dollers if you buy the entire setup... the avcr is in tip top shape and all parts included its in near mint condition !!! (this cost 400 new !!!)

CONTACT INFORMATION:

NAME: Carlos J

LOCATION: Where is the item located?

EMAIL: [email protected]

AIM: stricnynel0s

PAYMENT OPTIONS: Any, or Trades for S14 Kouki Parts or Rims

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • niZmO_Man
      R32 gtst speedo out by 10kph

      By niZmO_Man · Posted

      Your car was auto before? You have different diff ratio (auto vs manual i think? or n/a and turbo?)
    • niZmO_Man
      Rv37 400r questions

      By niZmO_Man · Posted

      +1 for getting a screen off alibaba, CarPlay/Android Auto is vastly better than whatever navigation cars had 10 years ago. I got an Android screen for my 2015 BMW, huge difference. Fully compatible with factory stuff including iDrive controls.
    • GTSBoy
      Stock rb25det neo questions

      By GTSBoy · Posted

      Yeah, my offer was more to show exactly how rough and ready the rig can be and still be useful. Youtube vids will definitely show cleaner setups. Same concept though.
    • GTSBoy
      R32 gtst speedo out by 10kph

      By GTSBoy · Posted

      I would guess the seal has gone down at the speedo drive and gearbox oil has crept up the drive cable sheath and fouled the speedo head.
    • tsuokun
      Lets play a game - What is causing my oil consumption?

      By tsuokun · Posted

      Any updates on this? Although not a stroker, nor built especially loose, my car has the exact same symptoms. Although I feel they were not there to begin with. Since rebuild with forged parts I have done about 40k kms and it feels like during the last 15k or so, the oil consumption has gotten progressively worse.  Compression test showed - what I thought at least - similar 10-10.5bars in each hole without oil. I have not yet done blowby test though, due to limited garage access. #2 plug is the looks the most foul and that was the one with 10bars. Nothing in the breather tank. I only recently disabled PCV and left only the hoses running from the valve cover via smallish tank to turbo intake pipe there and did some mildish 2nd gear pulls so the car was definitely on boost (1.4bar or so). Removed a hose from the tank and it was basically dry - meaning, the wipe I used had basically no oil on it. Last time I checked, the turbo and IC piping seemed dry as well (will have to see about that again after those pulls). For the past year and a half though, the car has been driven like a granny would for 99.99% of the time, since it mainly serves the purpose of carrying the family around nowadays. A lot of slow, stop and go city driving and most of the trips it barely sees any boost, but gets up to temp properly every time. Although there can be weeks it is not started at all. The car does not smoke, or at least not that I can see. (CAT is in place though). There is slight visible sweating at the Ex cam cover seal and I recently tightened the oil cooler lines as there was some mist on them too. It runs and idles extremely nicely and feels all around healthy. Like TurboTapin, I too am suspicious of my turbo. I have had IC pipes pop out from 1.6-2bars of boost a half a dozen times during the years. The turbo is a HX35/40 hybrid. So, a very similar mystery. Around 1500kms and a litre of oil surely cannot disappear to thin air. Apologies for the wall of text, not sure if any of the above is useful for best guesses/things to check next.  
×
×
  • Create New...