Jump to content
SAU Community

Recommended Posts

Hey guys, for those who have seen the Alcon's motorsport-spec monoblock calipers with the temperature indicator on them, but didn't fancy shelling out $10k for the brakes, you can buy the stick on caliper temperature indicators, see below. Very handy =)

http://www.proracestore.com/index.php?main...oducts_id=17577

:P

Link to comment
https://www.sau.com.au/forums/topic/342287-alcon-brake-caliper-temp-readings/
Share on other sites

yeah they are good. have been available for years. I use different ones for different things. mocal make a heap of different ranges. stick them on radiator, oil cooler, shock body, calipers of course. anything that you want to know the temp of. just need to buy the appropriate heat range sticker for the job.

they come in degrees C too which is easy for metric minded folk like us too. ;)

Ts.jpg

yeah they are good. have been available for years. I use different ones for different things. mocal make a heap of different ranges. stick them on radiator, oil cooler, shock body, calipers of course. anything that you want to know the temp of. just need to buy the appropriate heat range sticker for the job.

they come in degrees C too which is easy for metric minded folk like us too. ;)

Ts.jpg

Sounds like a great idea! Where do you source the Mocal ones from ??

cheers...

hey John, i've bought them from thinkauto (www.thinkauto.com) in the past, but since those guys are in the UK it's a bit pricey to just oder stickers (thought I have done it once!), I used to get them with other bits. But I have seen in NSW the guys that do trackside sales (race and rally - speedzone and perhaps revolution etc) do sell them too. Could also try earls in silverwater they probably have them. it's nice being in C and with different ranges of temp for different things.

cool. in that case it probably is worth getting them from think auto. I think they are about 1-2 pound each and postage maybe 5-10pound.

Should have been more clear, this is for a booklet of 16 stickers...

yeah the paint is good. not sure I'd say it's more useful. they are both good for different purposes. i'd use paint on rotors for example but for a radiator the stickers work great. they work fine on calipers too. I have noticed the paint does go off after some time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan! Yeah it's street use for me only. Maybe occasional track day. Any difference in noise when running with the two pumps? I would expect the lift pump to be more quiet than the main pump so hopefully not? And yes, unfortunately quite a big price difference to the simple hanger setup. Though I'm usually willing to trade money for better reliability and future-proofing. Buy once, cry once and all that. I'd be very happy to never have to deal with fuel pump / wiring issues again  
    • The old manifold was quite under the GTR strut brace.  The new manifold is quite [unknown] the GTR strut brace. The GTR strut brace was needed to clear the bonnet vents. The Old strut brace will almost certainly clear the new manifold, but not the bonnet vents. The old strut brace will almost certainly clear the new manifold, and the new bonnet without vents. But I am hoping the GTR strut brace clears the new manifold :p
    • On the bright side, at least you knew that it happened and remedied before anything happened. A friend of mine just took his Fiat 124 to a shop for an oil change and they didn't tighten the oil filter housing properly. 4.5 quarts spewed out and even after refilling + tightening the cap the engine has a tick now.
    • So, more pain. The FAST manifold is a little larger than the stocker. This is problematic because there really wasn't much clearance to begin with, so going from 'barely enough' well into 'no' is sad based on the external dimensions of the thing, even though where it bolts to the head is the same. Result is the fuel rails sit a good 25mm higher, and this is a bit of an issue with the wiring that runs behind the motor, and the fuel lines, and everything else. When pushing the manifold on, it required a huge amount of force to crush wiring looms to fit it, sensors like the MAP sensor are about 1mm from the firewall, and the FPR just has to bend ABS lines to be forced into place. After some brainstorming and some sad drinking, the loom for some reason ran from the grommet behind the ABS sensor, then to the driver side head, then back to the passenger side head. So all of this was pulled back and stripped, a few wires cut and rejoined, so that the 'branch' was now on the passenger side's head as below: Before you basically couldn't see anything behind the driver head. This is much improved! The MAP sensor is now pointing up (instead of at the firewall) Brackets have been made up for the rail. The rails are for a LS1, the manifold is designed around a LS2 as it's base. Which of course has slightly different bracketry and water pump clearance, hence the mods people need to do. Should be hopefully mounted tonight. I spent money on a new FPR that is slightly more compact than my Turbosmart FPR1200. The gauge has also been moved to the rail. There's also apparently an ORB to AN Union instead of the adapter, because the ~25mm of the current adapter is going to make the difference. Provided this all goes together and arrives today, it'll be the totally not stressful attempt to start it.
×
×
  • Create New...