Jump to content
SAU Community

Lakeside

handbrake

By handbrake,
in R35 GTR

 Share

Recommended Posts

handbrake Veteran

handbrake

Posted
Posted (edited)

well what can I say. everyone has been telling me to get my ass out to Lakeside all year. As I only starting visiting the race track in March of this year I thought I would cut my teeth out at QR, since then all my 7 track sessions have been at QR, until now.

Lakeside was a religious experience, and I am not a religious man. There is so much history to this track and I found it so much more engaging than QR, I cant wait to get out there again.

All the horror stories of carnage out there meant I was pretty timid. I was constantly out braking corners and lifting off the throttle where I probably needn't. I also left the traction control in R mode which was very intrusive with all the elevation changes, especially coming out of the eastern loop and really cutting my power heading out onto the main straight.

I hope to be there monthly next year.

Thanks to Paul Ruzic for organising another great day, and to Trent and Tess from Mercury motorsport for their support as always.

Edited by handbrake
Link to comment
https://www.sau.com.au/forums/topic/342545-lakeside/
Share on other sites
handbrake Veteran

handbrake

Posted
  • Author
Posted
Very glad to see you got out there mate! :D

My word I'd love to have even half of your straight line stonk in my 32 GTS-t that I run around there! lol

yep. stonk taken care of. Now just need more skill and a big new shiny set of balls.

Link to comment
https://www.sau.com.au/forums/topic/342545-lakeside/#findComment-5526280
Share on other sites
Col-GTSX Grand Master

Col-GTSX

Posted
Posted

was brilliant weather yesterday... shame i had been called up to work as i would have been here...

lakeside gave birth to my love of motorsport in the 80's its a very special track to me...

ive been around it on 4 wheels & 2... sometimes 3 :D

its really good to see the council figured it out in the end and the track was able to be re-opened in late 2008 to the public once more...

it laid dormant for too many years, now the fire is back and the people are coming to watch again...

nice work there mark

Link to comment
https://www.sau.com.au/forums/topic/342545-lakeside/#findComment-5526388
Share on other sites
GTR59 Explorer

GTR59

Posted
Posted

I'm glad you could make it Mark.

It was a big turn out for the day. Great fun. The GTRs ran very well. and I was pleased to make a 5 sec improvement on my previous conservative time.

I'm looking forward to the next Lakeside.

Next box to tick is the revised Morgan Park. :D

Link to comment
https://www.sau.com.au/forums/topic/342545-lakeside/#findComment-5526943
Share on other sites
RBNRG Enthusiast

RBNRG

Posted
Posted
I'm glad you could make it Mark.

It was a big turn out for the day. Great fun. The GTRs ran very well. and I was pleased to make a 5 sec improvement on my previous conservative time.

I'm looking forward to the next Lakeside.

Next box to tick is the revised Morgan Park. :)

+1 for revised morgan park

also +1 gazillion for the greatness of lakeside :):)

Link to comment
https://www.sau.com.au/forums/topic/342545-lakeside/#findComment-5527123
Share on other sites
LSX-438 Mentor

LSX-438

Posted
Posted
well what can I say. everyone has been telling me to get my ass out to Lakeside all year. As I only starting visiting the race track in March of this year I thought I would cut my teeth out at QR, since then all my 7 track sessions have been at QR, until now.

Lakeside was a religious experience, and I am not a religious man. There is so much history to this track and I found it so much more engaging than QR, I cant wait to get out there again.

All the horror stories of carnage out there meant I was pretty timid. I was constantly out braking corners and lifting off the throttle where I probably needn't. I also left the traction control in R mode which was very intrusive with all the elevation changes, especially coming out of the eastern loop and really cutting my power heading out onto the main straight.

I hope to be there monthly next year.

Thanks to Paul Ruzic for organising another great day, and to Trent and Tess from Mercury motorsport for their support as always.

Nice work Mark.

What tyres did you run?

Link to comment
https://www.sau.com.au/forums/topic/342545-lakeside/#findComment-5528857
Share on other sites
handbrake Veteran

handbrake

Posted
  • Author
Posted

second hand 270/68-18 michelins.

on the new 12 inch rears they were a bit stretched. sourcing some second hand slicks to better suit the new wheels

280/71-18 up front on 10.5 inch rims

310/71-18 rears on 12 inch rims

might snag new slicks next year but til then, dodgy second hand scrap for me.

Link to comment
https://www.sau.com.au/forums/topic/342545-lakeside/#findComment-5528948
Share on other sites
LSX-438 Mentor

LSX-438

Posted
Posted
second hand 270/68-18 michelins.

on the new 12 inch rears they were a bit stretched. sourcing some second hand slicks to better suit the new wheels

280/71-18 up front on 10.5 inch rims

310/71-18 rears on 12 inch rims

might snag new slicks next year but til then, dodgy second hand scrap for me.

grip doesnt look too bad in the vid?

Link to comment
https://www.sau.com.au/forums/topic/342545-lakeside/#findComment-5529897
Share on other sites
handbrake Veteran

handbrake

Posted
  • Author
Posted

thats because I was driving like an old woman lol

I was going about 80% I reckon.

I need to turn off traction control, which is more intrusive at lakeside than it is at QR where I push it harder due to oodles of runoff.

I only achieved a 59.28 on the day. the car should be putting out 56.xx

Link to comment
https://www.sau.com.au/forums/topic/342545-lakeside/#findComment-5529909
Share on other sites
Marlin Grand Master

Marlin

Posted
Posted (edited)

It should/will put out sub 56's to be frank.

Berry did low 56's in his there last year on factory rubber and engine boost cutting and misfiring over 6k rpm.

Once you have the track sorted in your head and decent slicks with your handling and grunt, well, it'll be Special baby! :P

Edited by Marlin
Link to comment
https://www.sau.com.au/forums/topic/342545-lakeside/#findComment-5529929
Share on other sites
handbrake Veteran

handbrake

Posted
  • Author
Posted (edited)

sure would love to get down into the 55's! no easy task. I need bucket loads of track time.

I will head out there on the Paul Stokell days but he only runs a few events out there every year. seeing as I can only get out on the track on weekdays normally, which track events should I get to? I see trackattack has some weekday lakeside days in their calendar but have never attended one of their events. any others I should try? would love to get out there once a month and out at QR once a month

Edited by handbrake
Link to comment
https://www.sau.com.au/forums/topic/342545-lakeside/#findComment-5531006
Share on other sites
Marlin Grand Master

Marlin

Posted
Posted

Honestly?

I'd suggest just visiting QR on occasion, and make Lakeside your main track. Once you get comfortable there, you'll be comfortable (and quick!), Anywhere.

Most of us Lakeside regulars avoid QR like the plague due to it's boring and less challenging nature (in comparison).

So yeah, any opportunity you get, go Lakeside :) I wouldn't get too caught up on doing the driver training days there though as they're of dubious benefit in my book.

I know it quite well and am happy to join you in the pits out there sometime if you like. You know how to get me :rofl2:

Link to comment
https://www.sau.com.au/forums/topic/342545-lakeside/#findComment-5531371
Share on other sites
hrd-hr30 Grand Master

hrd-hr30

Posted
Posted

You're right, heaps of track time is the go. It takes a while to learn Lakeside - alot more technical and challenging than QR. Specially if you start in a scary-fast car like that! Follow Ben around for a few laps to learn the lines - he's always there...

TrackAttack just piggyback off QR's events at Lakeside. They used to offer cheaper entry but not anymore...

QR's dates and entry forms: http://qldraceways.com.au/main.php?menu=qri05

They have some practice days on weekdays as well.

Link to comment
https://www.sau.com.au/forums/topic/342545-lakeside/#findComment-5531481
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Butters
      CAM COVER BILLET HALF MOON RB RUBBER REPLACEMENTS

      By Butters · Posted

      Tried them, they leaked. I also foolishly bought some random rubber ones that leaked too.  Genuine and not looked back.    As always though sample size of one, and I could have made a mistake installing them. 
    • drifter17a
      R34 gtt rb25det neo timing belt kit

      By drifter17a · Posted

      Technically still manual process to set it first time though
    • Milkmun
      Installing the fuel sender O ring in R34 GTT

      By Milkmun · Posted

      Shit job but not hard. I'd use a piece of wood to knock the plastic lid open to avoid damaging it, use a vacuum to clean up the fuel sender lid also so crap doesn't fall in. I'd probably do pump and filter at the same time since you're already in there, I reused my OEM sock after a quick clean since the one provided wasn't long enough. Could also hardwire your pump if you feel inclined.
    • Kinkstaah
      Installing the fuel sender O ring in R34 GTT

      By Kinkstaah · Posted

      Supercheap auto sell this: https://www.supercheapauto.com.au/p/pat-plusquip-fuel-tank-lock-ring-tool---universal-kit/SPO3564082.html I own this and if you HAVE PATIENCE you can remove it without snapping lines and generally being incredibly angry, then said at doing this job. Sadly I've removed the pump about 75,000 times over the years. I don't know if you're a large lad or a smaller lad but my advice to you as someone who is 185cm is if you are my height or smaller, is to sit in the boot and take your time. Yes you can put the seal on. The seal goes over the white thing/lid (you will see how it 'slots' in) then the whole assembly presses into the tank. then you screw the lock ring on. I spent so much time doing things the wrong way by trying to mount the seal into the tank first, then putting the white fuel hat on in the space provided. Put it together first then it'll all go in. But seriously be careful about removing the hoses AND where the removal tool is moving relative to the plastic pipes coming out of the lid when you've removed it. IT IS BRITTLE So brittle in fact I have two spare lids, and would recommend buying a spare and having it handy before attempting to do this. May as well throw https://justjap.com/products/deatschwerks-dw300-fuel-pump-nissan-s13-silvia-r32-r33-r34-skyline-c34-stagea?currency=AUD in the tank as well, as this uses all stock plugs and such. You may need to/strongly recommend you re-use your OEM fuel sock or use the one supplied with a length of hose so it sits at the stock height.
    • Duncan
      R34 gtt rb25det neo timing belt kit

      By Duncan · Posted

      The tension is automatic....if you follow the installation instructions Self adjusting tensioners are used when the chain/belt is expected to stretch during it's service life, but the downside is the tensioner itself can fail and cause a problem, while the RB system is locked once it is installed and doesn't have that risk
×
×
  • Create New...