Jump to content
SAU Community

Recommended Posts

Mazda 323 FTW. Mine is doing its daily duties great. Cheap on fuel, service costs pretty much nothing, as everything is shared with a Lazer.

Its like a up market corolla!

+1 for the 323 :thumbsup:

Our current one has now done 145 000km, and I've only had to replace a regulator mechanism in the drivers door. $120 and in stock today. Parts are cheap as and it does 6.5 L/100km rain, hail & shine.

Eunos? That 2 door thing? Or was there anbother one as well.

You want a granny spec 323- rear blinds and wool seat covers, steel wheels.

Then a 1/2 cut Famila GTR motor and box- forget the rear wheel drive, just run the front- that'd be a sleeper.

There was 323 in the mid 90's that had a 2L v6 in it, would be a cheap reliable daily, looked at one as a first car on my p's

yeah a eunos 30X, i dunno if the engine was any good, but they looked half ok

yeah a eunos 30X, i dunno if the engine was any good, but they looked half ok

Same 2.5 litre V6 as the 626, beautiful engine, but when they go wrong; and they do... BIIIG dollars.

There was 323 in the mid 90's that had a 2L v6 in it, would be a cheap reliable daily, looked at one as a first car on my p's

Eunos? That 2 door thing? Or was there anbother one as well.

yeah a eunos 30X, i dunno if the engine was any good, but they looked half ok

It came in the Eunos (as a 1.8 litre V6) or as a Mazda 323 Astina hard-top (4-door sedan) as well as Astina hatch.

Same 2.5 litre V6 as the 626, beautiful engine, but when they go wrong; and they do... BIIIG dollars.

Yep, same block, but the 323s were a 2.0 litre and Eunos was a 1.8 litre, (co-developed with Suzuki, I believe, and used in V6 Vitaras from that era and plenty of years after). Was a beautifully smooth engine. A mate had a 626 with the 2.5 and put an exhaust on it, and it sounded lush! I'm guessing the 2.0 would be just as nice to listen to.

Has anyone seen the movie "RED" with Bruce Willis, Helen Mirren, Morgan Freeman and John Malkovich in it? I was watching that and noticed that Jetwreck has a doppelganger in one of the other major roles...

http://www.imdb.com/media/rm2658108928/tt1245526

http://www.imdb.com/media/rm2356119040/tt1245526

http://www.imdb.com/media/rm1539997696/tt1245526

http://www.imdb.com/media/rm2815066112/tt1245526

Has anyone seen the movie "RED" with Bruce Willis, Helen Mirren, Morgan Freeman and John Malkovich in it? I was watching that and noticed that Jetwreck has a doppelganger in one of the other major roles...

http://www.imdb.com/media/rm2658108928/tt1245526

http://www.imdb.com/media/rm2356119040/tt1245526

http://www.imdb.com/media/rm1539997696/tt1245526

http://www.imdb.com/media/rm2815066112/tt1245526

Thought the same thing... he just needs more facial hair.

Pretty shit acting though

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What can't be done with a little bit of decking board or similar timber bolted to a hub flange via 2 wheel nuts is not worth talking about.
    • I noticed something. On the tps sensor and the sensor behind the adjustment screw is adjusted towards the far left. Are these screws supposed to be centered? (this sensor was in the same position before the tune as well)  Also attached a photo of where my car usually idles at when warm (sometimes a tiny bit above that). I think I might have screwed up the calculation and it might have better than I thought lol at 750rpm still not 650rpm though.      
    • So for both general interest of engine health, and to rule out any coolant/oil issues, I organised an oil analysis done on the 125,000klm oil Results below, all good, just a bit of fuel dilution which I'm not too worried about
    • This is actually a really good way of measuring what wheels fit. If only there was a similar measurement between hub face and suspension :p That said, it's probably pretty simple to actually measure it all with the wheel off the car for the rear. The front is a bit more complex but.. 
    • Being the top Google search result for R34 wheel-related inquiries, lemme throw down my experience. I calculated that 100mm from hub face to wheel face is about the perfect fitment for my ENR34 sedan.  I've been running 18x8.5s, ET35, with a 1" spacer. So, 8.5in to mm = 216mm. 216/2 = 108mm. 108-35 = 73mm. 73+ 25 (1" to mm) = 98mm.  If you wanna get close to this on dif widths, here are the offsets you'll want: 9" - ET around 15mm 9.5" - ET around 20mm 10" - you're crazy, but ET around 30mm All these should fit perfectly on a non-widebody, non-GTR Skyline. Note that it's probably the absolute max, and you're probably better off running a couple degrees of camber in this config, but it looks great, super flush.
×
×
  • Create New...