Jump to content
SAU Community

Recommended Posts

No point splitting up PM and PNM Alex. Might as well split up AWD and RWD C34's if you are going that way... and manual and auto configurations.

I reckon keep it simple and have it split into engine types.

C34, 260RS, NM35, PM35.

Do like the idea though :)

I wasn't going to split up PM/ PNM, I just couldn't find a way of writing it without looking like I was splitting it up!!!rolleyes.gif Did you think I was being specialwhistling.gif

Anyways, I think s brief note of the cars mods would be needed too like - C34- GT3076, nistune, Manual AWD - if you get my drift.

I'll work at getting this sorted when I get some time, a mod might have to update, but I'm happy to collate info.

what ya get done for ?

ride height and tint...

Nothing I can do about ride height...I dont think my coilovers clear the 100mm requirement even on their highest settings!

have to go back to stock???! :sick:

Funny thing is, I saw the HPU car ahead, he was busy issuing a ticket to someone. I drove at the limit and parked home (it was about 500m away). Next thing I know the HPU is in my driveway, lights flashing and all.

I guess he was "gracious" enough not to give me a fine...apparently I was going to kill people because my ride was too low and windows were too dark...

Interesting that when I was pulled over by HPU last May they had a peek under the car and didn't say anything about my height...and my car was even lower back then!!!

Edited by ironpaw

lol attitudes are different in the stagea section.

do you actually have tint on the car? the c34s came with "privacy" glass (not tinting) on the rears and cargo area that is very dark - but is legal

lol attitudes are different in the stagea section.

do you actually have tint on the car? the c34s came with "privacy" glass (not tinting) on the rears and cargo area that is very dark - but is legal

It was tinted by the previous owner....I've been pass so many RBT stops without any hassles I don't know why this douchebag had a hard on for my stag.

The rear glass had the factory privacy tint, the previous owner tinted the front to match. FFS it even passed roadworthy when I rego'ed it in Vic...

I guess someone needed to make his quota...

you modded the car, dont blame the cops :)

Typical holier than thou reply I'd expect from you...:whistling:

Edited by ironpaw

Soooo, sittin' watching Resident Evil; Apocolypse (obviously couldn't spell Apocalypse) the bit in the church with the "Brain Critters", and I hear a funny noise outside.rolleyes.gif

Flicked on the floodlight, slip on the pluggers and head out to the patio. Shit! Left the BBQ on; that was a lucky one. biggrin.gif

Turned to walk back inside; a frog jumped on my thonged foot!

Shit myself, jumped about four feet in the air; squealed like a little girl and nearly fell over in a puddle.

Meanwhile; the cat is sitting 10 feet away watching me dancing like Peter Garret on PCP...

If cats could laugh...

Now I'm all

yao_ming_meme_new_version_hd_by_guillersevilla-d3dwein.png.jpg

f**kin' nature...

Goddamit...just got defected...f**king cops...

LOL I love how p.i.g.s. gets autocorrected to cops on this site...

Didn't you lose your licence? Did you get it back?

Bad luck man. You still got the stock suspension?

Didn't you lose your licence? Did you get it back?

Bad luck man. You still got the stock suspension?

Lost it for a month, and lose it for another 6 month starting 1st Feb

yeah still got stock suspension....good thing I kept them!

Tempted to get BC's and pawn the silkroads though :whistling:

Been looking around at power steering coolers. Not keen on running a second hand one, rather just buy a new core and be done with it.

Figured I'd try the local guy, in my case Repco, and see what they had available.

First guy at Repco wants to know what the particular car is, then can't find one in his computer. Apparently Repco don't carry the stock power steering cooler for an M35... :whistling:

Then I tell him to stop looking for that particular one, and just a generic one, he passes me onto a second guy, who first thinks I'm asking for a power steering 'core', and then tells me he works on race cars and no cars come out standard with factory power steering coolers. Then when I correct him, he starts back peddling.

After treating me like an idiot, then tells me he can get PWR, and quotes me an outrageous price on it.

And these people wonder why we shop online/overseas... :domokun:

Been looking around at power steering coolers. Not keen on running a second hand one, rather just buy a new core and be done with it.

Figured I'd try the local guy, in my case Repco, and see what they had available.

First guy at Repco wants to know what the particular car is, then can't find one in his computer. Apparently Repco don't carry the stock power steering cooler for an M35... :whistling:

Then I tell him to stop looking for that particular one, and just a generic one, he passes me onto a second guy, who first thinks I'm asking for a power steering 'core', and then tells me he works on race cars and no cars come out standard with factory power steering coolers. Then when I correct him, he starts back peddling.

After treating me like an idiot, then tells me he can get PWR, and quotes me an outrageous price on it.

And these people wonder why we shop online/overseas... :domokun:

What did they want to hit you for a PWR cooler? Even the repco "V8" auto trans cooler kit is only $110 and it uses a PWR core.:rolleyes:

Everyone who works at Repco reckons they work on race cars; especially when they can't find parts for your car.:thumbsup:

Ebay is your friend for a little cooler; trust me...

Edited by Daleo

Ebay is your friend for a little cooler; trust me...

So how small can we go to do the job? I'd reckon it doesn't need to be half as big as the trans cooler to be OK, considering we don't have one at all.

Then i started wondering if a larger one (trans cooler size or even bigger) mounted out of the front airflow (a bit tight for space there) would radiate enough heat to be effective?

Funny thing is, I saw the HPU car ahead, he was busy issuing a ticket to someone. I drove at the limit and parked home (it was about 500m away). Next thing I know the HPU is in my driveway, lights flashing and all.

I'm not sure if things are different in Vic (well, we know they are in many respects, lol) but if I drove into my driveway & the police were more than 30sec behind, I'd already be in my garage with the auto door on the way down.

The only way he would be checking out my car is if he turned up later with a warrant ! Not sure about the law here if it was parked outside in my driveway tho.

The only way he would be checking out my car is if he turned up later with a warrant ! Not sure about the law here if it was parked outside in my driveway tho.

they arent allowed on your property for any reason, unless you have performed a criminal act and they are arresting you. im sure there are other reasons too.

AFAIK you cant be breathalised on your own property too

I find that very unlikely

You can be breath tested on you property. You can even be tested upto 2 hours (pretty sure its 2) after a accident. So if your involved in a crash and go home and drink you could be in a bit of trouble

they arent allowed on your property for any reason, unless you have performed a criminal act and they are arresting you. im sure there are other reasons too.

So in Jethro's case.... driving past with low & too much tint... a criminal act?? I reckon he had a good case to tell them to get of his property.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
    • Just wanted to say thank you for your input   my man (lead mechanic by trade) and I have done a heap of work as you can imagine just to make the hot side work with the dump pipe, stupid massive intake on turbo, trying to get the waste gate on was not fun.  I’m kinda getting to the point where I don’t know if I try and make this work and not throw all this cash and time away or do I scrap the lot and start again? the Apexi I’ve got was tuned for a few slight differences:   Tomei pon cams (mine are stock neo) Turbo smart 38mm external waste gate (mines 45mm replumbed) with stainless screamer pipe  3inch turbo back exhaust with high flow cat Sard 800cc top feed injectors Sard adjustable fuel pressure reg    
    • Out here E90s are the cheapest way into a sporty-ish car because everyone knows just how expensive the repairs can get. 8-10k USD for an automatic 335i. 
×
×
  • Create New...