Jump to content
SAU Community

Recommended Posts

got a new turbo to install in my car.... :P

what turbo!?

eyes andy suspiciously ... you havent been to jetwrecks have you ? ;)

argh i got delayed again with my suspension and tyres ..not till wednesday now *sad face*

also what difference did the plenum spacer make Dunc - i should probably invest in one of those and leave it on the shelf for two months also :P

I didnt notice the hugest difference with the fmic on a stock turbo.. in fact during the day a slight bit of lag , but a definate improvement at night.

Edited by PetroDola
also what difference did the plenum spacer make Dunc - i should probably invest in one of those and leave it on the shelf for two months also :P

At the moment, just a lighter wallet - could be because its sitting on my shelf next to me still :P

lol sorry dunc .. same boat as me ,

daleo .. you said it made a good difference yeah? :P

and someone here is making these who is it again.. and is there any left ?

Can i get one pls :P

Edited by PetroDola
lol sorry dunc .. same boat as me ,

daleo .. you said it made a good difference yeah? :)

and someone here is making these who is it again.. and is there any left ?

Can i get one pls ;)

Yeah, bucketloads more torque in the midrange, there's heaps more with my new exhaust, so this is just the cherry, on the icing, on the cake :P . Only had about 40km of diving so far, I'll be driving to work tonight; that'll be a better test.

Jetwreck's your man, but I don't know if he has any left :P .

Yeah, bucketloads more torque in the midrange, there's heaps more with my new exhaust, so this is just the cherry, on the icing, on the cake :P . Only had about 40km of diving so far, I'll be driving to work tonight; that'll be a better test.

Jetwreck's your man, but I don't know if he has any left :P .

Cool thanks .. hope hes got some left :S

yeah the dump and full exhaust mod in one go was the biggest improvement my car has seen in performance thus far.

Went to start mine today - it's absolutely DEAD! The fuel pump wouldn't prime, and the alarm/immobiliser wouldn't even turn off.

The battery is fine, but there must be a major issue with the alarm or something. I drove it on Saturday night, it started fine when I was leaving home, but would barely crank when I went to leave my cousin's to come home again. :) Hmmm, if tomorrow is the same (weirder things have happened), it's time to call Unigroup to see if there's a mobile sparky they can recommend.

what turbo!?

eyes andy suspiciously ... you havent been to jetwrecks have you ? :)

He wouldn't let me near his turbo and yours is a long way away...

I had MY spare turbo rebuilt with a Sierra Stage 1 kit..

It will be interesting to see the difference it makes.

Cool thanks .. hope hes got some left :S

yeah the dump and full exhaust mod in one go was the biggest improvement my car has seen in performance thus far.

PM sent

Edited by Jetwreck

Took the front guard inner lining off to run some wires on the 25G. Down the bottom of the guard back towards the A pillar

was chock full of wet mud, so today cleaned out both sides. There was a good double handfull of mud in both sides that were making a very nice rust inducing enviroment. Had done the RS a couple of years ago.

test fitted my wheels! (18 x 9.5 +20) seem to have heaps of clearance atm as i have bugger all camber dialed in, i may end up running a 5mm slip on on the front to bring them out a bit.

ps. yes there rotas bring on the hate! i couldn't resist them at $999 a set with hub rings and a full set of aftermaket lock nuts.

post-56886-1287477001_thumb.jpg

post-56886-1287477021_thumb.jpg

post-56886-1287477078_thumb.jpg

post-56886-1287477177_thumb.jpg

post-56886-1287477200_thumb.jpg

test fitted my wheels! (18 x 9.5 +20) seem to have heaps of clearance atm as i have bugger all camber dialed in, i may end up running a 5mm slip on on the front to bring them out a bit.

ps. yes there rotas bring on the hate! i couldn't resist them at $999 a set with hub rings and a full set of aftermaket lock nuts.

Looks tough mate. I like it. Do Rotas just get hated on because theyre not JDM, or are they 'considerably' inferior quality? (not being a dick/trolling)

Looks tough mate. I like it. Do Rotas just get hated on because theyre not JDM, or are they 'considerably' inferior quality? (not being a dick/trolling)

just a few...

19937d1118609139-issues-hre-wheels-hrea.jpg

Rota%20wheels.jpg

img0192hr3.jpg

rotaposterkq9.jpg

and my personal favourite - the before and after track day photos

rota0ni9.jpg

rotayu3.jpg

seen them all mate really doesn't concern me, believe me its an informed decision it is a daily only car but if they do break I will be the first to post them up. For the same sizes from rays 3-4 grand, just not worth it on a daily.

Edited by horrace
Looks tough mate. I like it. Do Rotas just get hated on because theyre not JDM, or are they 'considerably' inferior quality? (not being a dick/trolling)

TBH a bit of both, they were shit back in the day, all those pics mike posted are old but people have long memories, there was a guy here on sau recently whos spoke cracked but he was tracking an R35 on full slicks obviously my car is a ton lighter and wont be tracked with slicks.

TBH a bit of both, they were shit back in the day, all those pics mike posted are old but people have long memories, there was a guy here on sau recently whos spoke cracked but he was tracking an R35 on full slicks obviously my car is a ton lighter and wont be tracked with slicks.

Saw that in the SA Wasteland thread, Nightcrawler had a small spat about it :)

Yeah you guys gotta get your facts straight - they were on an R35GTR doing insane lap times for 6 months, then while the brakes/wheels were red hot from many very hard laps he went through a BIG ice cold puddle and one spoke cracked. Any alloy if you heat it up enough and then dump it in freezing cold water will crack. It is not a reason to stay away from Rota's at all, but rather a hefty endorsement that they can take all that punishment.

you'll be right for daily driving i'd say.

a lot of them were circuit racing incidents - plenty of load put on the wheels

there was actually a member on here that stress fractured the rotas he decided to use as track wheels on his r35

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A question for tuning awd, is it possible to disable the AWD? The stagea is an EA/T AWD, Toshi had said on a GTR, he was able to disable it and make it 2wd. Just wanted to double check if this was possible
    • Whoa, that's a name I've not see for a long time! Sorry to hear about the engine / turbo damage.  Fwiw with any engine problems it often really a case of just seeing what happens when it's apart, ymmv - I wouldn't rule out the possibility that the damage isn't even from the turbo failure, or possibly from a combination.  The airflow between cylinders isn't dead even, injectors can go off over time as well, with the turbos overboosting if you didn't have upgraded fuel system there could have possibly been a bit of leaning out - stock triggering is often a bit unreliable by this age too.  Basically its an old engine and a few things could have been going on, and you won't know how much work is needed until the engine is apart.  
    • I'm just shocked there's a euro driver on our roads who is thinking of other road users and not attempting to blind everyone. I wonder if Prank uses his indicator too...
    • Its hard to tell really. The Q50 owner's forum talks about it a lot and has quite a few people directly affected, but no idea what % of cars sold actually had the block replaced. Also, there seem to be 2 distinct issues which both get diagnosed by Infiniti as requiring a block replacement (no wonder they are going broke) 1. "Porous block" where coolant mixes with oil through thin or poorly cast parts of the block 2. Head coolant gallery plugs not sealing. If I was noticing engine coolant loss I'd start with cooling system pressure test (as always) and then I'd pull the cam covers and reseal the coolant gallery plugs on both side before worrying about a potentially porous block.  If neither of those did the trick it would be put in a second hand engine out of japan; I haven't checked pricing but I'm sure there are plenty around by now as they've been in production 10+ years
    • To clarify what I posted above, I thought you both had a situation where it cancelled sooner one way than the other.....if it is reasonably even where it cancels in either direction that is probably normal (consider gentle movements like lane changes, you don't want it to need half a turn of lock to turn the indicators off)
×
×
  • Create New...