Jump to content
SAU Community

Rips Rb25/30 Build Up

josh.s
 Share

Recommended Posts

josh.s Contributor

josh.s

Posted
Posted

I bought this R33 in August last year and it was already in immaculate condition inside and outside with no body kit or any of that rubbish, and already had a 35R Tial 44mm gate, Plazmaman inlet, Power FC, AVCR, Nismo 740cc injectors, Bosch 040 pump, and a few other goodies and had previously made 350hp on 16psi. It looked like this when I got it.

n78958807414333885878.jpg

I took it to the drags a few times but due to the clutch I couldn't get it to launch properly, so my best time was a 12.9 @ 115mph, then I put an Xtreme button in it and straight away ran a 12.6, still with room for improvement in the 60ft time.

Anyway about 6 months ago a knock developed in the front of the motor which turned out to be the harmonic balancer hitting against the lower timing cover. Both keyways were flogged out and there appears to be a bash mark on the front of the balancer which looks like it's been hit with a hammer at some stage. Very nice.

img1581y.jpg

img1582ad.jpg

img1583x.jpg

img1586w.jpg

I figured it was pointless going through the whole process of pulling the motor out just to put the same stock motor back in, so I got on the phone to RIPS and had them build me a hot motor RB25/30 combo.

I'm planning on maxing out the 35R in an attempt to get around 550hp at the treads but I'm not sure if it'll make it past 500hp, and if/when it expires I'll put a Borg Warner S372 on with 2-step.

Aside from the motor I added an 044 and surge tank, and decided to give Cryo a shot, see if it works or not. If it doesn't it's not big deal, it was cheap as. I have almost everything I need to get the motor in, just need to order a clutch. I figure an NPC twin plate will handle anything I can throw at it.

68352441242751125692956.jpg

This is just a photo of the car before it came off the road. The D1Rs are for sale and are in perfect condition with near new front tyres and brand new rear tyres for $1800 and are +32 and +37 so are perfect for a street car, the only time the tyres ever scrubbed was when I installed camber bars in the rear so the guards had to be rolled then.

96210639.jpg

I am planning on ditching the GTR wing at some stage also, will most likely put the standard box-type wing on if I can find one, otherwise it'll have to be a lip spoiler.

Link to comment
https://www.sau.com.au/forums/topic/342586-rips-rb2530-build-up/
Share on other sites
josh.s Contributor

josh.s

Posted
  • Author
Posted

Hey mate mine has a few extra things like extra balancing for higher RPM, high capacity sump and wide oil drive, then a few other bits on top. The RIPS standard internal engines are still good for 600hp. In fact they run a standard internal engine on a 500 odd hp drift car in NZ. Prices are available from RIPS, unless you go for a stock internal motor they're all different prices. Rob is great to deal with, and he responds to emails almost immediately if you don't have time to speak over the phone!

josh.s Contributor

josh.s

Posted
  • Author
Posted (edited)

I said prices are available from RIPS :) I'm not telling everything that's in it, that's a secret, so it doesn't really matter how much it cost because unless you get a stock one or one of the mildly upgraded packages they don't all cost the same!

I have no idea how much the stock rebuilds go for.

All I know is I just want to get some powerskids happening...

Edited by josh.s

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • welshy_32ZILA
      Welshys 32ZILA and the 8HP.

      By welshy_32ZILA · Posted

      I should note too as I have all 4 wheel speed inputs to the emtron I now have the emtron controlling the attessa solenoid for 4wd/traction and launch control strategies. 
    • welshy_32ZILA
      Welshys 32ZILA and the 8HP.

      By welshy_32ZILA · Posted

      It works quite well with the adjustibility within each of the programs of the turbolamik. Essentially p1 is drive and lockup comes on like a normal driver.  But in program 7 I have customised it to not request the lockup clutch to engage until something like 6500/7 when slip was the lowest. 
    • PranK
      Use text replace function to auto-link to referred threads?

      By PranK · Posted

      Yep, I like that. The tags are only on the first post of a thread and we don't get huge numbers of new threads. Also, I plan to add some more report types and we could have a member report type like 'review tags' then members could flag if they thought a topic wasn't tagged correctly.  No way man, I dig the input. Thanks! 
    • GTSBoy
      Use text replace function to auto-link to referred threads?

      By GTSBoy · Posted

      It's a valid thought. There's not exactly that functionality already (when creating a thread) - that's where the OP can use/create any tag they want. We'd have to come up with a way for the user to request their tags get reviewed or something. Otherwise the mods would have to review every new post's tags (for those that have them, anyway). There's kind of that functionality already exists to some extent, post facto of starting the thread, where the OP or any other user could report the post to admins, and request that tags get reviewed. We could do this already, and any user could already have made such a request. To make it a part of the forum proper, it would require an initial and an ongoing education programme, so that people know that it's a thing. OP based tagging/request for review would also require at least some (probably most) of the user base to be told that it's a thing they can do. Both of these things probably wouldn't spread too far and/or get used very much. If it was the standard approach on a lot of different sites, then it might do, because people would be used to it. Prank's approach to this differs from my original thought, by leaning into tagging. Which is fine - it's possibly better than what I originally suggested. In fact, I just went to the R32 GTR wiring diagram thread and added tags, including "Library". That's probably a good way to use tags and the idea of a library. We just have to drag together an (organised!) index of threads or posts that have that tag. I have yet to do any of my own follow up by pursuing worthy threads and posts and reporting/marking/tagging them for the library, such as the @Sydneykid stuff I was talking about, and possibly any amount of @Lithium 's and others' posts. At least if I tag them Library, we'll have a start.   Back to @Wazmond's idea as it relates to @PranK's, we might have some sort of a list of tags that are already used to scrape for this library. I'm not entirely sure how that would be presented or used, particularly if it got long. But it's yet another idea!   cheers
    • Wazmond
      Use text replace function to auto-link to referred threads?

      By Wazmond · Posted

      Just a thought, but instead of restricting, is it possible to do like an "up for review" kind of thing? Where say someone who's not an admin/mod tags, it would require approval for it to actually tag? User posts with a 'tag' > Admin/Mod Reviews > Approves tag > Tag now exists kinda thing? Just came across this thread so Im not too sure if Im straying off topic or not but forgive me if i am...
×
×
  • Create New...