Jump to content
SAU Community

Recommended Posts

post-33272-1288681944_thumb.jpgpost-33272-1288682060_thumb.jpgpost-6399-1125464280.jpgseries 1 1993 r33gtst nissan skyline. i have owned this car for approximately 4 years. During this time it has been mechanically perfect, i have added and upgraded performance parts in the quest for 250 + kw aiming for a nice streetable import however priorities have changed now and unfortunately it is time to let her go , it has:

series 2 rear spoiler

3'' xforce turbo back exhaust system

front mount intercooler

HKS GT-RS turbo kit

18'' advanti racing alloys

saber boost guage

gizzmo boost controller

spitfire coil packs

tomei fuel pump

excedy heavy duty clutch

mongoose alarm system

gates performance timing belt installed at 140,000kms

brand new battery fitted a week ago

sony head unit, one sony 250 watt amp and one fusion 250 watt amp mounted in the boot

the car will also come with an apexi fc computer however it has been removed from the car as i am advised it needs the hand controller to tune it. (the stock computer is running the car at the moment)

As stated the car has been mechanically perfect however there are a few minor cosmetic flaws, I will try to describe them as best i can. some of the paint on the roof and bonnet is starting to look a little faded the front rhs quarter panel has a dent in it where someone hit the car in a parking lot ( i will supply another mostly undamaged one with the car) there is a small tear on the drivers side seat easily covered by a seat cover, the boot scuff plate was missing when i bought it. i bought another one however it turned out to be a series 2 one and doesn't fit (i will include it in the sale if requested) and the rear rhs plastic mud guard has a crack. The air-conditioning also needs a regas. These things are mostly unnoticeable and easily fixed.

The current registration expires on the 24th of november. The car will be sold un-registered .i have asked my mechanic to have a quick look over the car and he said all it needs for RWC is 3 new tyres.

the car can be picked up from the coorparoo area brisbane, with payment at the time of pickup.

i am happy to answer any questions or arrange an inspection either through the site or on 0424634439

need it gone!

for some reason i can only post these 3 photos at the moment will try again later.

post-33272-1288682104_thumb.jpg

Edited by roy33
Link to comment
https://www.sau.com.au/forums/topic/342774-r33-gtst/
Share on other sites

tidy for the price.... what is the compression like in the motor? is it all good?

[/q

i checked the compression about a year ago just out of curiosity and it showed a consistent reading of 150- 148psi from memory across all cylinders, can't be sure on exact figures i know i was pleasantly suprised though. the car has been serviced every 5-10 thousand kms and looked after mechnically with the best of oils etc. i only run bp ultimate 98 in it. i drive the car to and from work every day and have done for the last 3-4 years. the HKS GT-RS turbo was brought brand new from nengun and is about 15-20,000 kays old and is perfect.

the only flaws are cosmetic and as stated easily fixed.

I'm picking up a brand new nissan navara n friday and really need the skyline gone, i could easily convert the car back to stock and sell all parts seperately and possibly double what i'm asking but just don't have the time!

someone grab a bargain for gods sake!

come have a look.

the car is on ebay aswell.

Edited by roy33
Link to comment
https://www.sau.com.au/forums/topic/342774-r33-gtst/#findComment-5530407
Share on other sites

What would be involved in getting it registered in South Australia?

Address is Victor Harbour about 80km from the Adelaide city.

Would it just require an ID check or would it need to go thrugh regency?

Link to comment
https://www.sau.com.au/forums/topic/342774-r33-gtst/#findComment-5530667
Share on other sites

What would be involved in getting it registered in South Australia?

Address is Victor Harbour about 80km from the Adelaide city.

Would it just require an ID check or would it need to go thrugh regency?

sorry mate have no idea might have to get in touch with the south aus transport?

Link to comment
https://www.sau.com.au/forums/topic/342774-r33-gtst/#findComment-5530784
Share on other sites

What would be involved in getting it registered in South Australia?

Address is Victor Harbour about 80km from the Adelaide city.

Would it just require an ID check or would it need to go thrugh regency?

take everything off thats aftermarket and replace with stock..

ie

Greddy Type S coil overs

HKS Kansai front & rear underbody brace Kit

Cusco tension rods

Cusco front camber arms

Cusco Rear camber arms

Cusco Drag Rods

Link to comment
https://www.sau.com.au/forums/topic/342774-r33-gtst/#findComment-5533003
Share on other sites

cooparoo hey im in forest lake.. im keen to check this out.

when are you available tomorrow?

you got a vin number so i can rev's check it .. if its going unregisterd.

Edited by PetroDola
Link to comment
https://www.sau.com.au/forums/topic/342774-r33-gtst/#findComment-5539381
Share on other sites

cooparoo hey im in forest lake.. im keen to check this out.

when are you available tomorrow?

you got a vin number so i can rev's check it .. if its going unregisterd.

Hey mate I finish work at 5 so any time after that don't have vin number off top of my head but can definately send it through to you when I get home my number is 0439676804, if you wanna call.

Thanks,

Troy

Link to comment
https://www.sau.com.au/forums/topic/342774-r33-gtst/#findComment-5539855
Share on other sites

seems like an awesome car for the price... would defenitely pay 6g's for it.

If u wanted to keep the car registered in another state just open up a PO box address in that state and then a week or two later forward it onto your current address. This way you can keep it registered in that state and can avoid going to regency.. Not that i am sure you would have to go to regency.

Link to comment
https://www.sau.com.au/forums/topic/342774-r33-gtst/#findComment-5540281
Share on other sites

Hey mate I finish work at 5 so any time after that don't have vin number off top of my head but can definately send it through to you when I get home my number is 0439676804, if you wanna call.

Thanks,

Troy

hey buddy , ill call you after work.

justed messaged you via mobile , send us your addy ill be over tonight circa 7pm if thats cool.

Edited by PetroDola
Link to comment
https://www.sau.com.au/forums/topic/342774-r33-gtst/#findComment-5540294
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • OK, that is a helpful description, because that sounds exactly like a bleeding issue in the clutch....these are hard to bleed manually even when the damping loop has been removed. I'd suggest bleeding again....start by filling the master cylinder up and opening the bleed nipple. Come back and check every now and then that the master cylinder is not empty. Let it gravity bleed for a few hours and see if that improves
    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
×
×
  • Create New...