Jump to content
SAU Community

R33 Gtr, Are My Injectors Maxing At 208awkw?

GD51LA

By GD51LA,
in Engines & Forced Induction

 Share

Recommended Posts

GD51LA Mentor

GD51LA

Posted
Posted

I want to fit cam gears, but my tuner tells me that my gtr has almost maxed out the standard injectors, how? she only has a humble 208awkw?

If that's the case, will a fuel reg fix it? Which one, does it have to be adjustable?

Is using a reg a bandaid fix for maxed out injectors? How?

R33 gtr, power fc, pod filters and 14.5psi

usmair Mentor

usmair

Posted
Posted
I want to fit cam gears, but my tuner tells me that my gtr has almost maxed out the standard injectors, how? she only has a humble 208awkw?

If that's the case, will a fuel reg fix it? Which one, does it have to be adjustable?

Is using a reg a bandaid fix for maxed out injectors? How?

R33 gtr, power fc, pod filters and 14.5psi

That doesn't sound.right.. my standard ones are at 270kw.and they still have a bit to give... either get yr injecters checked out or get a better tuner buddy

bigmikespec Veteran

bigmikespec

Posted
Posted
I want to fit cam gears, but my tuner tells me that my gtr has almost maxed out the standard injectors, how? she only has a humble 208awkw?

If that's the case, will a fuel reg fix it? Which one, does it have to be adjustable?

Is using a reg a bandaid fix for maxed out injectors? How?

R33 gtr, power fc, pod filters and 14.5psi

Check your base fuel pressure first to see if it is where it should be; I am not 100% what it is from standard so don't want to give you a bum steer. There should be much more duty left at that power.

snozzle Mentor

snozzle

Posted
Posted

well it adds up if your saying your injectors are near maxing out running on 14.5psi but you should be making far more than 208awkw at that boost

im running that exact same boost on -7 turbos (stock size), car is making 260-270awkw and my stock injectors are at 90% tops

his dyno must be just reading really low, f**k.. 60-70kw lower? thats redicilous

Blitz Grand Master

Blitz

Posted
Posted
well it adds up if your saying your injectors are near maxing out running on 14.5psi but you should be making far more than 208awkw at that boost

Its actually not far off the mark for a car without cam gears dialed in, and of course dependant on other mods. Remember every car/engine is different and the stock engines are getting on a bit now.

his dyno must be just reading really low, f**k.. 60-70kw lower? thats redicilous

How about comparing apples with apples here so as not to confuse the thread starter? Hard to compare a car with bigger turbos and ~270awkw to one with standard turbos and no cam gears. As you stated, there are plenty of dynos that read lower than others.

Back to the original query though, I would be checking your fuel pressure and most likely replacing your fuel pump as others have suggested.

MrStabby Grand Master

MrStabby

Posted
Posted

Agree most likely to be fuel pump dying, but don't forget to change the filter and check the vacuum/boost signal to the regulator.

Remember when checking the voltage at the fuel pump that the control module does not supply the full 14v at idle. IIRC its about 9v. I dont know when it switches to full power tho.

GD51LA Mentor

GD51LA

Posted
  • Author
Posted

He said standard gtr injectors max out on his dyno at 220awkw

I will say his dyno is prety shy, my car on another dyno (IS motoring) was reading 27 kw more

So that would take my car to 230awkw or so. Maybe the injectors would max at that hp?

Duty cycle reached 88%

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Everyone dyno is "shy" mate, it's the new black.

Either way, at that power level 88% duty means there is something wrong.

Although - you said they were maxed, yet now its 88%, that is not maxed.

GD51LA Mentor

GD51LA

Posted
  • Author
Posted
Everyone dyno is "shy" mate, it's the new black.

Either way, at that power level 88% duty means there is something wrong.

Although - you said they were maxed, yet now its 88%, that is not maxed.

88% is safetly maxed

Anyway, I got my money back from the tuner today :D

It's booked in at crd tommorow..

We'll see what they say

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Watermouse
      Drive By Wire Conversion options

      By Watermouse · Posted

      I recently got their dbw 74mm throttle body and pedal kit. It is sensational quality especially the wiring harnesses. Unfortunately I can’t answer u about the fitment to stock inlet manifold as I’m going Rahjab Racing forward plenum. Only one thing to be careful of is understand u have to pay gst and import fees if your purchase is over $1,000 in one shipment.
    • pogman
      George's R33 GTST build

      By pogman · Posted

      yeah i agree paint match stops it from standing out so much, oh that's actually really good to know i was wondering if it would help with air flow now actually having an outlet in the bonnet. Will have to focus on ducting into and out of the radiator now to make the most of it.
    • The Bogan
      George's R33 GTST build

      By The Bogan · Posted

      I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • shortyboy
      Drive By Wire Conversion options

      By shortyboy · Posted

      Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • pogman
      George's R33 GTST build

      By pogman · Posted

      small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
×
×
  • Create New...