Jump to content
SAU Community

Recommended Posts

Hey guys, just wondering if anyone knows the flow rate for our n/a injectors. And would upgrading to some GTS-T injectors and fuel pump make any difference except for running it a bit richer? Would you need an safc or something to make use of the upgrade injectors? I noticed at the dyno day all our n/a's were running quite lean.

Can pick up some injectors and pump for fairly cheap so just wondering.

Link to comment
https://www.sau.com.au/forums/topic/34282-fuel-pump-and-injectors-upgrade/
Share on other sites

the injectors can handle more then enough flow for ne possible mods u can do keeping the engine NA, an SAFC will help richen it up if thats what u want but keep in mind rich generally ='s less power.

Cheers

John

yes but 7psi boost is a big difference to ne perfomance mods that could be done whilst still keeping an engine NA. Maybe i worded it poorly but i said nething that can be done to the engine while still keeping it NA the injectors and pump would probabl;y handle it within reason. For eg, my pump is giving me ample fuel for an extra 75hp and is quite happy to do that but it would be a hell of alot of work to get an extra 75hp out of an NA engine without nitrous or turbo. Dunno if im making sense its too early in the morning but i think thats what i mean.

If you're talking exhaust, pod etc you should be fine, as you will only get a few hp...but if you're looking at increasing compression, getting the head ported polished etc...you may find leans spots. I'm really suprised that the nitrous hasn't leaned you out actually.

_turtle_ got what i was trying to say, big day at work just couldnt put the words together. Umm yeah no the nitrous doesnt lean it out at all, infact the car runs really rich with it, like the AF guage goes spastic and lights up every green bar it has. My boss says my injectors should cope with the rb30 block and huge headwork to the twincam head but i spose only time will tell.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initial/early bite is a feature of.....generic pads. Things that work cold. Just put Bendix Ultimate in it. If you don't like them, it's only $3.50 wasted and an hour to change them. I've been using Intima SR, and they seem to be a good performance pad. Street friendly and able to take at least a little beating.
    • This is my first post after registering.. I hope i can find useful resources on this forum. Great forum. 
    • As I implied in my post, I have NO idea what the were. But in case I didn't make it clear, the way they performed was brilliant; whatever the brand was. I think it was the compound that made the difference. And if they were Bendix, then sign me up, I want another set. I did drive down mount Ousley (just outside of the Gong) a few times, and they showed no untowards performance.   Its not the low dust that I am looking for NOW. At the time I needed low dust, but now I have no issues with dust but want the initial/early bite of the pads that were used. Yeah, the early cold squeal may of been due to a missing shim or such.  And to repeat, its not the low dust I am seeking, its the initial bite of the pads and increase in bite as  the warmed up during each breaking. As soon as I let off, I don't remember the breaks being extra sticky if I used them again soon after. But I also did not test that theory.   Thanks for the recommendation, But I would prefer to choose something specifically with the behaviour I described.   I assume that they didn't use the default compound off the shelf, as we discussed the dust issue at length. And the early squeal when cold, I have seen the sound is more of an issue with some pad compounds. Mostly ceramic, which also are said to produce less dust.
    • Well, in 2007 he must have been charging about $1800 an hour. He only looked at the car for 5 minutes. And another 4 to write the report wrong, and another minute to correct it. Mind you, this was for a car that was: Stock engine, fmic (hole in drivers guard), all alloy intake and custom air box, 3 inch turbo back exhaust, lowered, and a set of 17" Advans (255/40/17 rear and 235/45/17 front). It was nothing crazy. The blue slipper wanted the "hole in the guard" engineered. But that was because he got the shits that I wouldn't "relocate the battery from the boot, back to the factory position in the engine bay"... In an R33 GTST...     Also for emissions, E85, and don't go wild on timing. It's amazing how the closer you get ignition timing towards max torque, the last couple of degrees really throw NOx counts right up. And for the huge increase in emissions, it's only a small increase in torque.
    • He'll be looking down and swearing about "the damn apprentice" for trying to convince Duncan to use percussive maintenance... 😛  
×
×
  • Create New...