Jump to content
SAU Community

Recommended Posts

So a few weeks back I was over in Italy for work and had a couple days to kill at the end of the trip.

So like every petrol head I decided to head off to look at Ferrari.

I was looking around the web trying to find some options when I came across this site:

http://www.motorstars.org/ENG/About%20us.htm

They do a bunch of different tours to the various factories.

Sounds good I thought got in contact and booked my tour.

So the morning of the tour I was Picked up outside Bologna Train station by Francesco in his van.

Lucky for me I joining me on the tour were another 6 Aussies so got to have a good chat.

First thoughts were positive, the Van we got picked up in was very clean and was loaded with a dvd player and a bunch of screens.

After a bit of a intro and a chat, we found out a bit more about our guide.

After growing up i the region then working for Ferrari scuderia, Lambo and pagani at different stages (mainly in Composite R&D) he decided to branch out own his own and start these tours. The advantage to this is he has contacts everywhere and really knows the history and cars.

So the tour I was on visited, Lambo, A Maserati museum, Pagani, Ferrari, and an option to take a ferrari out for a drive for some extra cost.

So off we head to Lambo to get started with.

On the way to the different factories he was playing a a dvd for each fo the car companies to give you some history if you weren't already aware.

This worked we as it keep you interested and no dead time on the tour.

So we hit Lambo at opening time and he gets us in prior to the other people waiting around, which was a nice touch.

Due to the Factory being closed to visitors(this was told to us prior to boking) whilst they update we went off to the museum,

and what a collection. Reventon, Concept cars, race cars and some old classics.

we were given a tour here of the cars as well as having some free time to roam and go to the gift store(where you got a discount if you were on the tour)

Italy2_2010%20074.jpg

Italy2_2010%20065.jpg

Italy2_2010%20090.jpg

From here we headed to a Maserati Museum. Now a few years back when Massa went broke it sold off the Museum and a private investor bought the lot. So unless your on a tour you don;t get to see this.

They were mainly the older cars so no MC12 or current cars but then in my books the older ones are much cooler.

so we got a private tour of the cars and could get up close and personal with them as no rope or barrier to stop you.

some very cool race cars and old classics there.

Plus a range or a few other cars like Gullwing 300sl mec, 507 BMW and a huge range of classic Bikes.

Italy2_2010%20116.jpg

Italy2_2010%20125.jpg

Italy2_2010%20132.jpg

After this we headed into town for lunch at a cafe, (included in the price) and then off to Pagani.

Now unless your a buyer it is very hard to get into Pagani, and having this on the tour is what got me interested.

not only did we get to see the showroom but taken into the build shop and the r and d lab.

Now as they are working on the zonda replacement (they were throwing sheets over the moulds as we walked through) we could not take cameras into the back rooms only the showroom

so in the showroom was the Zonda uno (the being the correct word as it is a one of one model)

Italy2_2010%20145.jpg

Italy2_2010%20157.jpg

From here it was off to ferrari, with the drive experience done first, (so was not caught in peak hour traffic.)

This is run by a 3rd party

Now I had booked a 458 to drive, however the night b4 one of the staff binned it so it was out of action.

so as a consolidation I look out a Lambo 560-4 (with a nice discount!)

this palce had, 4*430F1, 2*430scud, 1*430Conv, 2* california, 2*560-4 plus the none working 458 and some older cars as well.

So that was a blast, open road exotic car and a guide who was very laid back.

So I admit I might have speed a little but the guide did take us to an area to strech the legs a little at one stage I was doing 170ish the guide was just bored sms'ing on his phone, (the other guys in the california said they hit 185 on the same strech.

Italy2_2010%20206.jpg

Italy2_2010%20052.jpg

Italy2_2010%20050.jpg

From here it was off to the Ferrari Experience.

with a very nice range of race and street cars.

And a fully guided tour naturally:

Italy2_2010%20196.jpg

Italy2_2010%20202.jpg

Italy2_2010%20171.jpg

Italy2_2010%20180.jpg

then a nice drive though the country side back to the pick-up point where I got dropped off.

Now I know this is all just one big shamless plug, but as Francesco is doing a private operation and does not advertise, (just a website and word of mouth) I thought I would let some other people know.

All in all if you are in that part of the country I can strongly recommend that you have a chat to Francesco and go on the tour.

oh and the rest of the pics can be found:

HERE

Link to comment
https://www.sau.com.au/forums/topic/342860-italy-factory-tours/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're not wrong, but more than a few times I've heard of people running into issues where their injector characterization isn't quite right and that approach works for that specific configuration but once they switch over to a new set they discover a whole bunch of stuff wasn't set up correctly. It's slightly more annoying to reverse engineer the OEM MAF transfer function but you already have the sensor wired up to the factory harness so keeping it around for a few weeks more while you figure out the tune is easy enough. I've seen GM also use a combination of both MAF + MAP in their ECUs before, MAF is for steady state and a calculation of the cylinder VE to correct the base VE table, then in transients it uses that calculated VE + raw MAP to determine cylinder filling somehow.
    • I know this one’s the BB one. My tuner did make mention about the actuator. I am curious about the VCT as well
    • Might also needs a stronger actuator with the right preloading. With older 2019 built bush G3 units, BB upgrade or 21U housing down size makes a pretty decent gain in response as well. 
    • Hey lads  so im finally putting together my rb30 forged bottom end and ran into an issue. I measured my main bearing clearance with arp main studs torqued to 60 ft-lbs using ACL H series STD size bearings and standard, un-ground crank shaft journals and got an oil clearance reading of about 1.3 thou measuring straight up and down and about 2.8 thou measuring at a 45 degree angle (just above and below the parting line). My machine shop said they measured the main tunnel and it was all within spec (they didnt say the actual measurement) and to go with a standard size bearing, which i have done and the clearance is too tight, I'm guessing because of the extra clamping force from the arp studs distorting the main tunnel. I was wanting to run about 2.5 thou main bearing clearance.  My questions are: 1. could i just use the HX extra 1 thou clearance ACL bearings? that would fix my straight up and down clearance making it about 2.3 thou, but then would the side to side clearance be too big at around 3.8 thou? 2. what actually is the recommended main bearing clearance for measuring near the parting line / side to side. i know its supposed to be bigger as the bearing has some eccentricity built into it but how much more clearance should there be compared to the straight up and down measurement? at the moment there is about 1.5thou difference, is that acceptable or should it be less? 3. If i took the engine block + girdle back to the machine shop and got them to line bore the main tunnel (like i told them to do the first time, but they said it didnt need it) what bearing size would i buy? the STD size bearing shells already slide in fairly easily with no real resistance, some even falling out if i tip the girdle up-side-down. If im taking material out of the main tunnel would i need a bearing with extra material on the back side to make up for it? this is probably confusing af to read so if something doesn't make sense let me know and ill try explaining in a different way. My machine shop doesn't come back from christmas break until mid January, hence why i'm asking these questions here. TIA for any help or info 
    • I bought the model back in Japan in Feb. I realised I could never build it, looked around for people who could build it, turns out there's some very skilled people out there that will make copies of 1:1 cars or near enough. I'm not really a photo guy... but people were dragging me in a group chat for the choice of bumper as someone else saw the car before it was finished as they are also a customer of that shop. I took the photo in the above post because I was pretty confident that the lip would work wonders for it. Here's some more in-progress and almost-done pics. It gives a good enough idea as to what the rear looks like!   I have also booked in a track day at the end of January. Lets all hope that is nothing but pure fun and games. If it's not pure fun and games, well, I've already got half an engine spare in the cupboard 
×
×
  • Create New...