Jump to content
SAU Community

260rs Boost Controller Problems

DRKSKY32

By DRKSKY32,
in Four Door Family & Wagoneers

 Share

Recommended Posts

DRKSKY32 Enthusiast

DRKSKY32

Posted
Posted

Hey guys I just got a single stage turbo smart boost controller and Im having a hard time getting it to work, from what Ive found on the net all u do is take the 2 hoses going into the boost reg. and use them to go into the Tee on the boost controller, Ive done that and the boost hasn't changed, I've tried adjusting it and installing the tee one way then the other and still I cant get any more boost out of it, PS the switch is all hooked and it clicks when u flick it so that ends all good

Cheers for any help

Link to comment
https://www.sau.com.au/forums/topic/343049-260rs-boost-controller-problems/
Share on other sites
chef_stagea Grand Master

chef_stagea

Posted
Posted

Stand at front. Between ur battery and fuse box is the stock boost solenoid, use the hose coming in from the right on 1 of the tee bits. 2nd one is right behind the plenum, prick of a spot... Pull it off the plenum, block the hose off. Run a fresh hose from this nipple, to ur tee. Grab ur boost reading of your fpr hose for ur controller,

If u need help flick me a pm :D

Hey guys I just got a single stage turbo smart boost controller and Im having a hard time getting it to work, from what Ive found on the net all u do is take the 2 hoses going into the boost reg. and use them to go into the Tee on the boost controller, Ive done that and the boost hasn't changed, I've tried adjusting it and installing the tee one way then the other and still I cant get any more boost out of it, PS the switch is all hooked and it clicks when u flick it so that ends all good

Cheers for any help

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • sonicii
      Lower A arm Skyline v35

      By sonicii · Posted

      The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
    • Red Sky II
      Looking for autoelectrician in Perth who can do the OEM to double din stereo upgrade.

      By Red Sky II · Posted

      Thanks Paul I reached out to Autotainment but they no longer work on JDM cars as the guy who used to do the work moved on and is no longer doing that kind of work. I am talking with Level Up Audio though.
×
×
  • Create New...