Jump to content
SAU Community

Recommended Posts

Its a 1993 Rb20DET silver top

post-77521-1288864619_thumb.jpg

I had 3 inch exhaust system and pod everything else was stock far as i know.

Is this safe to be running that amount of psi and power with a stock RB20, also is it spiking cus it goes from like 12.5psi to 10psi why is that i really need help as i dont know about this stuff other engine stuff is easy please any help would be great cheers.

Josh

Edited by Resigned R32
  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/343070-is-this-safe/
Share on other sites

I'm not sure about what the standard RB20 turbo can handle, but as long as the AFR's are fine then there's nothing wrong with that.

The power does look a tad low though, but that might be because it's still the standard RB20 turbo, which is small :D

Link to comment
https://www.sau.com.au/forums/topic/343070-is-this-safe/#findComment-5532796
Share on other sites

yeh thats normal and safe.

i was running 1 bar(14.7psi) through a stock rb20 turbo for 3 years and about 60000ks (had 124000ks on it already when i bought it) and it was still in great condition when i pulled it out.

Edited by battery
Link to comment
https://www.sau.com.au/forums/topic/343070-is-this-safe/#findComment-5532797
Share on other sites

I'm not sure about what the standard RB20 turbo can handle, but as long as the AFR's are fine then there's nothing wrong with that.

The power does look a tad low though, but that might be because it's still the standard RB20 turbo, which is small :D

Ill have to re dyno it soon got a FMIC on it now try boost worx and see if they can help me out and check the AFR. lol ya i know i want 180 rwkws xD

yeh thats normal and safe.

i was running 1 bar(14.7psi) through a stock rb20 turbo for 3 years and about 60000ks (had 124000ks on it already when i bought it) and it was still in great condition when i pulled it out.

Really 1 bar whoa nisstune or standard tune? i thought you can detonate the engine at 13psi? ppl keep telling me 7psi is standard tho is hell annoying to get a straight answer argh = (

Edited by Resigned R32
Link to comment
https://www.sau.com.au/forums/topic/343070-is-this-safe/#findComment-5532826
Share on other sites

can detonate the engine at 0psi or 100psi, boost is mostly irrelevant. rb20s run 10psi standard, rb25s are 7psi.

and that boost and power is not going to hurt a rb20

so it is 10psi thanks. Heaps of ppl keep saying standard is 7psi, was scarying me = (

Link to comment
https://www.sau.com.au/forums/topic/343070-is-this-safe/#findComment-5532850
Share on other sites

people run 16psi through the stock turbo for years and have no issues.

they dont really make much power over 14psi so i say run it at that and if it blows well its only gonna cost you $100 and half a day to replace one.

if your worried about detonation its best to get the AFR's checked on a dyno which depending on where you go will cost between $60 and $100.

Link to comment
https://www.sau.com.au/forums/topic/343070-is-this-safe/#findComment-5532863
Share on other sites

people run 16psi through the stock turbo for years and have no issues.

they dont really make much power over 14psi so i say run it at that and if it blows well its only gonna cost you $100 and half a day to replace one.

if your worried about detonation its best to get the AFR's checked on a dyno which depending on where you go will cost between $60 and $100.

I think im gonna book to see boost worx this monday to tune my fmic and check everything isnt pinging thanks for your help = )

Link to comment
https://www.sau.com.au/forums/topic/343070-is-this-safe/#findComment-5532888
Share on other sites

rb20s will run up to 13psi just off the spring depending on intake/exhaust mods, 13psi dropping to 9 in the top end is fine if its been tuned and it looks like it has a decent one, fairly smooth.

Just make sure AFRs and knock is in check, power looks about right, usually see between 150-170kw with that boost and a tune, looks fine to me, 30 minutes on the dyno should confirm everything is fine.

Link to comment
https://www.sau.com.au/forums/topic/343070-is-this-safe/#findComment-5533144
Share on other sites

Ill have to re dyno it soon got a FMIC on it now try boost worx and see if they can help me out and check the AFR. lol ya i know i want 180 rwkws xD

Really 1 bar whoa nisstune or standard tune? i thought you can detonate the engine at 13psi? ppl keep telling me 7psi is standard tho is hell annoying to get a straight answer argh = (

Hey mate,

I reckon you should go and see Shaun @ Boostworx, he's a great tuner.

the graph doesnt really tell all that much? but i'm assuming that you're using a bleed valve to up the boost? if thats the case then the boost curve looks about right, i had a bleed valve on my GTR, it was peaking at 19psi then dropping to 18psi gradually like your's has.

i now have an EBC, it hold 21psi flat all the way to redline, but its cost me! for your aim's i'd say stick with the bleed valve.

as far as tuning goes, if you've still got a stock ECU then get a Nistune, they're cheap and probably best bang for buck ECU out there. I'm running one in my GTR and its great!

if you just wanna check that the car is running okay then throw it on a dyno and check AFR's and whether there is any knock. that's what's really going to kill your engine (excessive knock or lean AFR's)

Link to comment
https://www.sau.com.au/forums/topic/343070-is-this-safe/#findComment-5533449
Share on other sites

rb20s will run up to 13psi just off the spring depending on intake/exhaust mods, 13psi dropping to 9 in the top end is fine if its been tuned and it looks like it has a decent one, fairly smooth.

Just make sure AFRs and knock is in check, power looks about right, usually see between 150-170kw with that boost and a tune, looks fine to me, 30 minutes on the dyno should confirm everything is fine.

Ya im gonna go this monday at boost worx got it booked to make sure. Thanks for the info mate helped out = )

kinda hard to tell without a AFR graph whats going on.

looks ok though - you mention getting a tune with a FMIC - what ECU?

Standard ecu man

Hey mate,

I reckon you should go and see Shaun @ Boostworx, he's a great tuner.

the graph doesnt really tell all that much? but i'm assuming that you're using a bleed valve to up the boost? if thats the case then the boost curve looks about right, i had a bleed valve on my GTR, it was peaking at 19psi then dropping to 18psi gradually like your's has.

i now have an EBC, it hold 21psi flat all the way to redline, but its cost me! for your aim's i'd say stick with the bleed valve.

as far as tuning goes, if you've still got a stock ECU then get a Nistune, they're cheap and probably best bang for buck ECU out there. I'm running one in my GTR and its great!

if you just wanna check that the car is running okay then throw it on a dyno and check AFR's and whether there is any knock. that's what's really going to kill your engine (excessive knock or lean AFR's)

Ya ive booked it for monday to see him to make sure my car isnt pinging or spiking and to tune my fmic to the car. Also i dont have a bleed valve at all and standard waste gate which is weird

Link to comment
https://www.sau.com.au/forums/topic/343070-is-this-safe/#findComment-5533878
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
    • Yup but for me its the HR ! Cut my teeth on the old holden 6s in the day ! And here's me thinking in the day it was also the 300ZX and the Mitsubishi GT3000 ! All, as well had good lines, but always seemed to need finishing off, style wise.
×
×
  • Create New...