Jump to content
SAU Community

Recommended Posts

According to V35 (japanese magazine) the series2 (Jan03 - Nov04) models sold in Japan when new as follows

350 GT-8 3.66million Yen

350GT 6MT 3.00million Yen

350GT Premium6MT 3.25million Yen

Have no idea what the exchange rate was back then but today it is about 82Yen = $1AUD making them cost between $36k and $46k. No doubt there would be some dealer and rego charges to add but they were not as expensive as you would imagine domestically.

(The autos are far more popular in Japan accounting for 99.5% of the production of these models.)

According to V35 (japanese magazine) the series2 (Jan03 - Nov04) models sold in Japan when new as follows

350 GT-8 3.66million Yen

350GT 6MT 3.00million Yen

350GT Premium6MT 3.25million Yen

Have no idea what the exchange rate was back then but today it is about 82Yen = $1AUD making them cost between $36k and $46k. No doubt there would be some dealer and rego charges to add but they were not as expensive as you would imagine domestically.

(The autos are far more popular in Japan accounting for 99.5% of the production of these models.)

Unfortunatley, it doesnt work this way.

For whatever reason, there is a big mark up for cars in Australia. Its not just import tax and GST either.

Take a look at the yanks, they pay only $27 - $29k (USD) for a 370z... while we pay $70,000. Work that one out.

Unfortunatley, it doesnt work this way.

For whatever reason, there is a big mark up for cars in Australia. Its not just import tax and GST either.

Take a look at the yanks, they pay only $27 - $29k (USD) for a 370z... while we pay $70,000. Work that one out.

So true! Was in the States a in July this year and drove my cousins 335i around LA - when asked how he could afford it, well, it only costs $45,000! (compared to $105k+ out here). I guess Aus is still better than some Asian countries like India, Singapore and even M'sia.

^Diabolique - I was in the US a few weeks back and another reason why Beemers are so affordable is that they were offering 0.9% interest for the life of a loan... If that was the case here I would def consider a 335i

Yeah I think the $70k mark would be realistic. I'm cringing to think how much the V/G coupes will cost when Infiniti hits Australia in a year or 2 (or 3), bearing in mind it is well and truly possible to privately import a base model V36 coupe for somewhere around $35k give or take at the moment.

I recently had to replace my V35 after some fool didn't look where he was going. After the slightly inflated insurance value (agreed value was a good choice) I found myself tantalisingly close to having enough cash to import a V36. Unfortunately when I added up the cost of all the extras I would definitely want (ie the Chris Rogers treatment) I would have been blowing the budget out of the water. In the end I settled for a nice Series 2 V35 for an excellent price, could afford to have all the extras added and still have change from the insurance payout. Its been said many times before but V series coupes are brilliant value :blink:

Edited by MSKYO

And if we want to get even more ludicrous, the famed example is the commodore SS.

Its built here, in australia, and we pay about $50k for virtually the same thing that gets exported to the yanks and they pay only $32k for it.

Anyhow.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Might piggy back off this thread since there's been a good discussion about PWM.   I purchased a Walbro 460 F90000267 and have been looking into PWM to understand it. It was purchased more of a future proof as my original OEM fuel pump died (r33 below 200kw) and figured I'd just upgrade it to this. That's when it hit me that a pump this big can cause more dramas with such high amperage draw and heating of the fuel pump being on 100% all the time in such a mild setup.   I have a Nexus R3 and slowly collecting power mods but I was looking into the PWM feature on the NSP software:   Then looking at the graph from the fuel pump:     Am I safe to assume reducing duty cycle to 50% for example would make the pump run like a 230/lph ? Where does the PWM come in all of this ?   I've gone down the rabbit hole of PWM fuel pumps and it seems there are many differing opinions on how to go about it 😅  
    • Thank you, this will keep me busy for a bit.  I will update progression.
    • That specific one would be an exchange part, meaning I'd have to send mine to them. Plus it looks like a non AWD sump, which won't work for me. There is one or two shops in my country that I can ask to do a sump extension job and it'd most likely end up being cheaper than sending mine to AUS or NZ and getting one back, and quicker too.
    • Rear turbo is leaky, most likely at the oil drain. From what I could see with my boroscope it seemed to have seeped out at the very top of that return hose. Is it possible that the oil climbs up that hose to then leak out? Yup, coolant leak on the hot side of the engine, only noticed after seeing clear rusty residue in the block right from the turbo oil feed downwards to the pan, and red droplets hanging from the pan. No clear sign yet from where it comes, and most of the lines there are hardlines right? Last year, seeing those red drops, I thought it was power steering, will be glad if that is not leaky at least. Another leaking hose I found by chance is the lower of the two heater core hoses coming from the firewall to the back of the head. That one is not too bad to get to if I have to replace.
    • I think for response I'm already kind of out there no? he -5s are not the best pick for that as the Internet tells me. Maybe I should switch to -7s while I still can? Though that almost definitely warrants an engine pull along with the other issues I have.
×
×
  • Create New...