Jump to content
SAU Community

Recommended Posts

Hi All,

i have just completed my rebuild of my RB26 engine, spec are below

the tuner told me that i can't higher the boost due to the injector has already max at 85% or more. if we would to push 1.5 to 1.6 bar the air fuel will lean down. i have attached the dyno sheet.

The question is that i see some of the forumer here have smaller or similar size of injector but could push a much higher WHP.

Is there any problem with my setting or tuning?

RaceTech 86.5 mm piston

TOMEI 1.5mm @ 87mm metal head gasket with oil restrictor

Jun Oil Pump

Balance crank, piston, rod, clutch, main pulley

Refresh Standard Head

HKS step 1 IN/EX 264 cam

Jun Cam gear

BC valve spring

Greddy type 6 throttle intake manifold

SARD 720cc injector

HKS type fuel rail

Tomei Fuel regulator

Garrett GT35R AR1.06 split type

aftermarket ex manifold split type

Tial 44mm ex wastegate

Power FC D Jetro

ETC ETC...

post-23041-1288938718_thumb.jpg

Thank you in advance

DC

Link to comment
https://www.sau.com.au/forums/topic/343175-rb26-720cc-injector-max-out/
Share on other sites

Would have thought 720cc capable of quite a bit more power. Pressure on idle is fine but Walbros flow chart shows flow drops off sharply when pressure goes up so I imagine having two of them won't change that. I guess adding an external Bosch 044 or two with a surge tank would solve the problem.-

Would have thought 720cc capable of quite a bit more power. Pressure on idle is fine but Walbros flow chart shows flow drops off sharply when pressure goes up so I imagine having two of them won't change that. I guess adding an external Bosch 044 or two with a surge tank would solve the problem.-

lol idiot!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...