Jump to content
SAU Community

Recommended Posts

This is what I should have been inquiring about last week not the BATAMBLE one . I found CES's site but no mention of Skyline front pipes . I'll have a look in the group buy section and if thats no good then a good pre loved one would be fine if anyone's selling one .

Cheers A .

Go with with CES, Trevor has proven power figuers 20kw just from a dump pipe on a gtst or gtt!! i'd like to see a bell mouth do that.. How many people here that say don't use CES have used there products. Forcing the wastegate and exhaust together straight out of the turbo creates turbulance...

Anyway just give Trevor a call and tell him what you want you won't regret it trust me the change was the best thing i did with my R34, more power then most with the same mods and more Boost.

Good Luck

Yes they cost more than some but the best is never cheap :banana:.... (but money should be nothing when it comes to pride and joy + performance) Well worth it for a wicked wastgate sound and performance you can feel... Also their full systems have the most power for a STREET LEGAL exhaust on the market.

He is one of the best and ships world wide, also has the best street legal Subaru exhaust with the biggest gains.

Edited by 99 GTT
Go with with CES, Trevor has proven power figuers 20kw just from a dump pipe on a gtst or gtt!! i'd like to see a bell mouth do that.. How many people here that say don't use CES have used there products. Forcing the wastegate and exhaust together straight out of the turbo creates turbulance...

Anyway just give Trevor a call and tell him what you want you won't regret it trust me the change was the best thing i did with my R34, more power then most with the same mods and more Boost.

Good Luck

CES have a fine product.

Have you back to back tested them against a bellmouth??

The increase in turbulence when the wastegate cracks is balanced by lower turbine outlet pressure, there isn't much to be gained or lost but my experience is that a good bellmouth makes a bit more power earlier and cost a bucketload less.

(but money should be nothing when it comes to pride and joy + performance)

that's a very interesting mentality.......

I find that alot of these "top quality" parts are way overpriced and often a cheaper option can be used to obtain 99% of the result.

Go with with CES, Trevor has proven power figuers 20kw just from a dump pipe on a gtst or gtt!! i'd like to see a bell mouth do that.. How many people here that say don't use CES have used there products. Forcing the wastegate and exhaust together straight out of the turbo creates turbulance...

Anyway just give Trevor a call and tell him what you want you won't regret it trust me the change was the best thing i did with my R34, more power then most with the same mods and more Boost.

Good Luck

Done back to back with CES and Decent bellmouth types and found ZERO difference.

Done back to back with CES and Decent bellmouth types and found ZERO difference.

Fair enough then if you have done back to back runs... But was it a full CES exhaust and was the other exhaust 100% STREET LEGAL like the CES?

Like i did say above there are other exhaust that are just as good and better but most are not legal or even close.. I guess you go with what you think is the best at the time and i just stick with Trevor because on any car his product is alway tops and good power and sound without the worry of getting a defect for it..

:P

Edited by 99 GTT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ha! well, there's your problem!  Guess the last person in there didn't have great attention to detail....
    • It seems like you guys want to behave like rabid dogs, rather than gentlemen... Knowing one has jumped in on a fellow comrades near done deal, and sniped it at the last second, how can one sleep at night?
    • My wifes says we have a spare set.
    • Good news!!! Changed the O ring today and I’ve got the “pssshhhh” back when I open the fuel cap 😂🙌🏼🙌🏼 It was 100% the O ring because that bloody thing was inside the fuel tank 😂😂😂😂😂 Fitting new fuel pump was a pain as always since the DW is a bit longer than stock. But she’s running!!! ❤️
    • PWM quite literally just chops the ful 12V voltage on and off at whatever duty cycle you're running it at. If you're running it 100%, then it is on full voltage all the time, same as if there was no PWM. If you run it at 50% duty cycle, it is only seeing the full 12V half of the time. This is broadly equivalent to running it at 6V. But the crucial difference is that motors (and a lot of other loads) don't like being powered at low volts. They will either fail to start rotating, or draw a shit ton of current, or other undesirable things. But if you give them the full volt, and then a short period of no volts, and then some more full volts, then the times when they are seeing power they are seeing all the voltage, and they are happy. But you get the performance out of them as if they were only seeing that fraction of the full voltage. It is not really easy to answer your question about what flow you will get out of it at 50% duty cycle. I can tell you that it is not as simple as you think. For a start, that 460 L/h pump is not going to flow 460 when you're on boost. When you're on boost you will be somewhere down the sloping part of that red line. If you have 15 psi of boost, then the pump can only deliver about 95 gal/h, which is <380L/h. So your simple 50% on 460 = 230 wasn't going to work anyway. But also, it won't deliver 50% of 380 either, because when you devolt or PWM trim th epower being fed to the pump, it is not able to deliver flow or pressure in the same way. 50% duty cycle will probably produce <50% of the full voltage flow. The way to find out what duty cycle you need to run it at at low load (ie, at idle) is to idle it and turn the DC down until you start to lose fuel pressure, then turn it back up above that with some extra for safety. And then you do the same thing at full load, in case it doesn't need anywhere near 100% DC. And if you're careful/caution/prudent, you will also do it at a couple of loads in between so you can shape the DC map against load. It might not be linear between the two end points.
×
×
  • Create New...