Jump to content
SAU Community

Recommended Posts

  • 1 year later...

sorry to bump an old topic....

does anyone else use a Quaife front diff i their GTR? i want it for street use, good strength, a bit of everything, a trip to the drags and the odd circuit day.

I talked to Ash (31nismoid) he seemed happy with the nismo front diff, The quaife centre i can get in australia, if i go cusco or nismo i will most likely inport it.

thoughts??

"Gav" & "R32-TT" (i think thats wrong lol) - both WA users they have Quaife fronts.

I believe Gav is around at the moment and not away for work, drop him a PM :thumbsup:

As i said in my PM's, it wasn't just the front diff. Also had a modified transfer case & rear diff - its the overall that makes a difference as when i just had a front it was good, after the rear was done it was sensational.

Ive got a couple of customers that we've installed quaife enters for.

One has a factory transfer case, nismo shimmed rear diff and quaife front with 4:3 ratios.

It's subtle in the car park but works well on the track (track only GTR)

Another has a quaife front, nismo rear, modified transfer and actuator, seq hollinger and 3:5 ratios.

It's a bullet of a car and the gearbox makes it a pig, the diff has been terrific.

Good question, I can get one for 1699 delivered from just jap. Anyone know a better dealer?

The quaif diff sounds awsome for street and circuit work, anyone know what it wo be like launching at the drags?

I got mine from SVS in the UK

[email protected]

The blokes name is Tim. Champion of a guy. It cost me about $1100 but then i got raped by customs.

Another option is [email protected]

Cant remember the blokes name.

Can't comment on how it drives but give us a few weeks and I will. Matty and Gav from WA swear by them!

Having driven a mates GTR with a similar setup to mine recently (he didn't have a front diff or transfer mods, but did have a rear diff) - the car was very very tail happy out of corners as if it were RWD... Where mine would put all the power down and drag you out of a corner with only a mild squirm in the rear at best.

Hard to say if it's just one part, it's certainly the overall combination of the 3 drivetrain parts add up to a noticeable difference irrespective of which front diff you go with.

But given how my mates GTR drove, I'd certainly be thinking about a front diff as well. Honestly if i had my time again the first mods to a GTR aside from turbos/injectors/ECU - would be to do the diffs etc. Highly rate it as a course to take

  • 2 weeks later...

Diff arrived, Palmside were good to deal with, Bought for less than 1k delivered in the end, bargain in my books.

pics

IMG_0910.jpg

IMG_0911.jpg

and all new bearings to install

IMG_0822.jpg

BBQ, oil and liquid nitrogen used to get the bearings on and cups in the diff

IMG_0909.jpg

  • 1 year later...

What advantages would a Quaife have over other front diffs like , Nismo, ATS and OS Giken.

I have Nismo 2-way LSD at the back, would it be better to get a Nismo at the front or mix it with the Quaife at the front.

I chose a quaife for the front of my GTR and a nismo clutch pack upgrade for the rear.

Different tech to all the others, the result is a better design for the steering and drive end. I'm sure the nismo would be fine if bedded in correctly, i have driven a GTR with an ats front diff, quiet but felt notch-y. I havn't mush experience with an OS front, but I would imagine they would be great on a drag car.

Ford used them as oe in some of the performance focus models, so can't be a bad thing.

J.

Edited by XRATED

'locking up' generally is a term used to describe a point at which the diff positively engages a torque bias.... this may be a percentage or a full lock up depending on the diff and how it's set. the term is mostly used with clutch style lsd's. An example would be an aggressive kazz rear diff in an s13, at slow speeds it will 'lock up' on a short turning radius and bang the cv's/tyres (essentially the same as a welded diff).

this is why I chose the Quaife.

http://quaife.co.uk/quaife-products/quaife-differential/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The hot exhaust light will come on not from just the cat being blocked, but it's just a temp sensor, and it's designed to warn you to not do things like park in long grass.   If you've been pushing the motor a bit, it can cause the light to come on.   Second if the cat is rattling, I'd suspect it's not blocked, but instead falling apart inside.   The easiest "fix" until you can get a cat put back in, is to unbolt your one, bash the rest of the insides out, and then bolt it back in.   For a daily driver/street car, I am in agreeance of put a cat in the car. If it were race car I wouldn't care if it were removed.
    • No worries at all 🫡 I think the most satisfying things to make are the little bits that are just impossible to find or they're no longer manufactured. Generally I always try to replace parts with OEM wherever possible. This little project is also great because it'll never see the light of day, but strengthen these brackets so it's not just relying on the little standard screws in the headlight plastic. As soon as I saw the standard brackets and screws I thought, "well I'm not going to install with just the screws, the plastic tabs will just snap off". It's crazy how expensive everything has become yeah. But I suppose that's supply and demand; granted it's a lot easier to get brand new genuine parts these days which is fantastic 😊, I don't have to get totally reamed at the local Nissan dealer ha ha We sure are lucky we have all these manufacturers making parts these days, a few really great Australian companies too like Platinum Racing Products and Fit Mint Automotive, what a time to be alive ❤️ . I've got my eye on the RB26 head by PRP as mine has a very fine hairline crack, so that'll need to be addressed some time in the future. If you have any requests or odd things to make feel free to let me know and I can have a crack at making replacement parts ✌️
    • Thanks for sharing this, and BTW if your headlights are in good condition they are worth thousands....you might want to consider replacing them with brand new LED ones like this (https://www.nengun.com/78works/full-led-headlights-r32-skyline) and making enough profit to buy a house in Sydney
    • I'm not sure what sort of shops are nearby, but I'd expect any reasonable exhaust shop could put a cat in it that will not restrict the power that engine makes. Otherwise, if you want to remove it, short lengths that replace the cat are readily available online, search for "de-cat pipes" or "test pipes"  
    • Howdy friends, So another weird one today, I was looking into replacing some broken clips holding the front grille for the R32 GTR (part number 01553-03831), and noticed the brackets which are supposed to hold the grille in place were also missing 😑. I do recall seeing this issue many years ago, but didn't fix it at the time. A quick look on eBay and I was able to find the genuine brackets, along with all the screws which suited the headlights (part numbers 26042-08U05,26092-08U05). Happy days!....  Once they arrived however there was an extra nut in the packaging which implied that there should also be a bolt or a stud, and sure enough, after a bit of searching I found this thread from 2013, and @Ants clearly shows a stud should be present. Reading around a bit more, it's possible the headlights on my car are the "povo pack" headlights as mentioned by @funkymonkey in this thread way back in 2008. This could explain why the studs are missing on my set of headlights. Looking at the headlight diagram I wasn't able to see a suitable part number for the stud itself. The headlight did indeed have a recess that looked like it would accept a stud, but interestingly no thread or anything obvious how the stud would be affixed to the headlight, I suspect it may have been glued in, press fit, or melted into the plastic at the factory. Another member may be able to clarify if they happen to have a genuine set of N1 headlamps. The only thing we have to work with within the recess is a keyway which likely is there to prevent the stud from rotating within the recess. In any case, back to 3D printing, I put together a model which acts like a pug with a friction fit inside this recess, making use of the keyway so it doesn't rotate while tightening a bolt. Printing in TPU will allow it to slightly swell making a nice snug fit without cracking the part. I've designed the adaptor it to accept an 20 mm M6 bolt (stainless with a cap head in my case), as opposed to the standard M5 stud and I made use of the standard galvanised split washer that came with the genuine brackets from Nissan. Once the bolt and screws were all in place, giving the bracket a gentle shake gave the classic "shaking the car" feeling, very solid, which gives me confidence this is going to be able to hold on much better than the janky solution which seems to have been here for the past decade or so. Overall I'm really pleased with how this turned out and maybe there are more people out there running these headlights without a centre stud at all! Link to the freely available model on Printables: Click here Regards, Sean  
×
×
  • Create New...