Jump to content
SAU Community

Recommended Posts

Hey guys,

My rear window washer isn't working and I want to fix it so I've had a closer look at it. The motor on the front washer bottle for the rear is working. I put a shorter hose on it and it shoots water out. I figured that maybe the jet bit on the rear window was blocked. I disconnected the hose that goes to it and tried to shoot the rear window washer, but nothing came out. This tells me that maybe there is a kink in the hose from the front bottle to the rear of the car, or a split; something that isn't allowing the water to get to the rear washer jet.

Does anybody know where the hose travels, front to rear? Are there any common problems etc?

Any help or ideas to get this fixed would be great!

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/343389-fixing-rear-window-washer/
Share on other sites

would be helpful to know car model... i'm going to assume R33 (because thats what i have/ know)

but on the R33's the tube runs down the drivers side of the car then up the side of the rear seat, under the rear parcel tray and to the nozzle.

One thing to check (was an issue with mine) was that near the end of the line at the back, under the parcel tray was a little 1-way valve (so that you didn't have to pump water along the whole tube every time). this had perished and cracked for me hence why mine wasn't working. i just removed it and taped the tubes back together and it seems to work fine enough for me now.

i.ve got a problem with mine that if im on a hill with the bonnet higher then the boot it just drips untill the water runs out! i know is gravity but how do i fix it?

yeah, +1 for broken hose somewhere.

with the issue i described before, the way i found out was exactly like that, went outside to find my car taking a leak :P

i would check the place i mentioned first, just under the parcel tray/ shelf.

yeah, +1 for broken hose somewhere.

with the issue i described before, the way i found out was exactly like that, went outside to find my car taking a leak :P

i would check the place i mentioned first, just under the parcel tray/ shelf.

its actually coming out of the washer jet but only when im on a hill facing up hill

My car does this too, whenever I leave it on a hill all the water drains out, also when I stick the boot in, the water pushes back and out the water spray half way up the rear windscreen, not that big an issue but im worried that over time it may cause rust around the boot seal. Would love to know if there is a common cause for this before I start ripping everything apart.

check that one way valve that i have mentioned before.

in theory even though the water is flowing in the direction it is supposed to, that valve would put up some resistance (which is overcome when the water has the extra force provided by the pump)

that or someone has taken the 1-way valve out, because after i removed mine i noticed when i hit high boost my car wets its self :P

well, there is something in common between the R32 GT-R and R33 S1 sedan at least then, who would have thought :blush:

one day i might bother seeing about a new one way valve, but as i said it's been working ok without one.

Just makes a little squirt when i hit high boost and she gets excited.... oh right, we are supposed to be talking about cars >.>

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Getting Dangerously close to being ready to go back in the car. Rockers in with clearance castings now (and a quick check with the USA for the torque settings for the larger custom bolts) Covers and ported FAST Manifold sitting on there. Not fully tightened down as there's some clearancing required for the water pump with the earlier LS1 water pump styles. Example of the clearancing needing to be done: The body has to be ground a little but I'm struggling finding an actual piece of it. The later variant of water pump resolves the issue as the manifold was designed around it. It only came on the VZ LS1 in Australia, it got a different pulley for Gen4 motors. (it also costs $450... vs... $0).
    • https://files.fm/f/5atwkuvcjd
    • Doing some height adjustment on front suspension on a v35 and noticed this. The passenger side looks correct. So wondering what's happened to the drivers side?
    • Oh...I have the electric mirrors as well iirc ...they're in the same state as just about every other R31 door mirrors, with the 3 plastic screw towers broken/cracked in the plastic molding. All the interior is 'dry', so the mirror switches etc likely all work fine. Some pics below of the trimmer pieces ~ looks to me like previous owner, painted chrome finished trims with black paint ...ergo, the chrome underneath is likely a-ok... ...starts to look yukky posting stuff like this, how much did it cost in fuel on your last sortie up this way?...me just thinking aloud, borrow someone else's 4cyl to cut costs, come do your own pick'n'pull like before to save me some bother...hehe.. but whatever, I'll just earmark bits I know you want, because the way this is all panning out, I'll be able to retire the R31 from daily duty at long last, replacing it with a Subaru wagon I'm lining up in the wings...ergo, my attitude towards the donor pinny shell is starting to wane a bit, and I'm more than happy to help you out there... Like you say though, no rush...and I'll guarantee we won't be moving too far from this locale at any rate 馃槑
    • Cool, I鈥檓 just down Sydney today. Not much time to get online.
  • Create New...