Jump to content
SAU Community

Project Mu Type Hc Pads Wanted To Swap

camoR33

By camoR33,
in Wanted to Buy

 Share

Recommended Posts

camoR33 Rookie

camoR33

Posted
Posted

Hi Guys,

I have a set of front Project MU type HC pads that have 8mm meat left on them and long story but i need a pad with about 6mm or less meat,

this is for a swap, my 8mm for your half worn pads! must be track suitable brake pads!

the story summarised:

i have a sil80, i did a 300zx brake caliper upgrade with RDA slotted rotors drilled in a 4-stud, problem is i think i bought the incorrect caliper as it wouldnt fit over the new rotor... long story short i "modified" the calipers so they fit, but coz its soo tight i cant use new brake pads. i have a set of stock pads in there, and bought some project MU type HC from a mate to use on my upcoming track day, however the pads having 8mm of meat left means they are too thick and when i bolt them in the wheel cant turn! so i need something half worn with a maximum of 6mm meat on the pad.

i have my street pads, so i need something to use on the track! half worn track pads would be ideal as long as good condition, the project MU's are expensive pads but i am willing to straight swap if anyone is keen,

also could add $$ for the right pads.

PLEASE HELP! even if you have 34-mm meat and want a new set of pads i will swap

cheers

Chris PM or msg 0421466142

im near hornsby or city weekdays

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 GTR EV? The leaf of the Godzilla's!

      By GTSBoy · Posted

      Yes...but look at the numbers. There is a tiny tiny fraction of the number of Joules available, compared to what is used/needed. Just because things are "possible" doesn't make them meaningful.
    • Butters
      UniClutch

      By Butters · Posted

      Thanks for taking the time to post that ! If anything changes or happens please do update us. 
    • joshuaho96
      R32 GTR EV? The leaf of the Godzilla's!

      By joshuaho96 · Posted

      Somehow Vertimass/Oak Ridge National Labs has figured out a catalyst that can convert ethanol into C9-C10 hydrocarbons in basically a single step without ending up with a bunch of ethylene or similar waste products: https://patents.google.com/patent/WO2023224867A1/en I still don't think anything like this will keep us from needing to transition to EVs regardless along with all kinds of other electrification, but things like this will go a long way towards alleviating the problem of how to electrify things like planes. Renewable diesel is seemingly an easier problem as well, Chevron is already running refineries for the stuff and the primary feedstock is tallow and other waste fats from agriculture.
    • RB2533
      UniClutch

      By RB2533 · Posted

      Ok so I have sorted everything with my uniclutch and  i can offer up a bit of feedback and some things that might help others.    I found problems with factory damper line. Weird shit and had trouble with peddle adjustment    I used this https://au.gktech.com/products/r33-gts-t-skyline-braided-clutch-line?_pos=2&_sid=22b01b9b9&_ss=r Also when adjusting peddle leave a bit of play. You can get into a over stroke condition easy.. Make sure you can push the slave forward after adjusting to confirm fluid can return to master then you will need to pump it up heaps…..not sure why but that’s how it is.    last thing the splined adapter is machined perfectly. If your input shaft is old like mine was I would put a bit of valve grinding paste on it and stroke it like a 15 year old. Just to give it a tad more clearance and to better match it to the spline.    reason is on a near flat shift I have had situation where the peddle returns a millisecond after you lift from the clutch. No slip or anything but I reckon this is due to tolerance on the spline being way tighter than stock clutch and binding for a sec. I think this will go away but also my spline was old. Box is old so I guess I should have checked better. It’s a super neat fit.    it feels light as and holds awesome without any noise    
    • Duncan
      Rv37 400r questions

      By Duncan · Posted

      My Fuga Hybrid is JDM, 2014 model but very similar to the V37 from the looks of things..same platform just physically larger and very comfortab;e
×
×
  • Create New...