Jump to content
SAU Community

Recommended Posts

Got a nistune comp going in my 31 and it'll be on the dyno later this week. Does any one know if it possible to give it two separate tunings and how hard it is to switch between? ie: can i tune it for high performance on one setting and max economy on another, and is it as simple as flicking a switch while i'm driving or when the car is off? or would i need a controller to plug in or my laptop? I'm sure this is covered somewhere, couldn't find it at a glance so can any one tell me or point me in the right direction? cheers.

Link to comment
https://www.sau.com.au/forums/topic/343495-nistune/
Share on other sites

IMO there's no need, the high load high rpm cells will be right for the high performance and the low load low rpm cells will be right for max economy. You choose what you get via the right foot!

If you wanted two different tunes you'd have to get the nistune software and a consult cable and install the tune each time you wanted to change.

EDIT:

Oh, and http://www.skylinesaustralia.com/forums/Ch...E8-t332217.html

Link to comment
https://www.sau.com.au/forums/topic/343495-nistune/#findComment-5538458
Share on other sites

Once you get your final tune I can probably help you on switching tunes.

The ECU can be setup with a security feature or a different tunes for different fuel etc.

Let me know what the part number is and I'll double check.

I can run up to 4 different tunes in the R31 ECU and most switchable on the fly.

Kind regards

Sime

Got a nistune comp going in my 31 and it'll be on the dyno later this week. Does any one know if it possible to give it two separate tunings and how hard it is to switch between? ie: can i tune it for high performance on one setting and max economy on another, and is it as simple as flicking a switch while i'm driving or when the car is off? or would i need a controller to plug in or my laptop? I'm sure this is covered somewhere, couldn't find it at a glance so can any one tell me or point me in the right direction? cheers.
Link to comment
https://www.sau.com.au/forums/topic/343495-nistune/#findComment-5538470
Share on other sites

im always putting 98octane fuel in it any nothing else. I work at a servo so it's never out of my way to get it. So i don't want different tunes for different fuels. Is it worthwhile trying to tune it for better economy or should i just drive with a lighter foot?

Link to comment
https://www.sau.com.au/forums/topic/343495-nistune/#findComment-5538494
Share on other sites

im always putting 98octane fuel in it any nothing else. I work at a servo so it's never out of my way to get it. So i don't want different tunes for different fuels. Is it worthwhile trying to tune it for better economy or should i just drive with a lighter foot?

I think it largely depends on who has tuned it.

but still ends up back with the Drivers ability to control the foot as well !!

Link to comment
https://www.sau.com.au/forums/topic/343495-nistune/#findComment-5538772
Share on other sites

As you have stated, there is no need.

A good tune will be economic when you are light on the throttle and have the power when you boot it.

Running multiple tunes would suit running different fuels (as mentioned above) or in a dedicated track car where the team may want to switch between tunes for different tracks/setups.

Stick the the one tune, goodluck with it :D

Link to comment
https://www.sau.com.au/forums/topic/343495-nistune/#findComment-5539630
Share on other sites

If boost is held constant then the best performance tune and the best economy tune will be the same.

Down low you'll have as much timing and as lean as it can handle eg off boost and with O2 feedback, up high you'll spend 2% of the time there if it is daily driven so it doesn't really matter how it is tuned.

Ask nistune themselves who they recommend to tune it.

Edited by Rolls
Link to comment
https://www.sau.com.au/forums/topic/343495-nistune/#findComment-5539691
Share on other sites

im always putting 98octane fuel in it any nothing else. I work at a servo so it's never out of my way to get it. So i don't want different tunes for different fuels. Is it worthwhile trying to tune it for better economy or should i just drive with a lighter foot?

there is no point, it should be tuned for maximum economy and best power in the one tune. the only reason to have multiple tunes is fuel changes. Nistune cant run multiple maps.

Link to comment
https://www.sau.com.au/forums/topic/343495-nistune/#findComment-5540187
Share on other sites

cheers for all the replies fulla's. It makes it easier on me now. Just gotta make sure i take it easy now then.

Nick is busting out some pretty good tunes lately... As everyone else said there is no real difference between a good power/economy tune as the afr's are the same for both (or there abouts).

The best way would be to install a electronic boost controller with hi/low boost switch... low boost is eco mode, hi boost power mode.

Power= air + fuel. Less power used = less fuel used- so just don't drive so hard.

Or install a throttle stop... ha h ah ha.

Cheers

Justin

Link to comment
https://www.sau.com.au/forums/topic/343495-nistune/#findComment-5541188
Share on other sites

oops, i didn't mean the throttle stop. i meant how hard is it to put in the electronic boost controller. or how much would that cost?

It's probably one hours labour for Marty to install it. Electronic boost controllers start around $400.

Link to comment
https://www.sau.com.au/forums/topic/343495-nistune/#findComment-5542355
Share on other sites

I have a dual stage boost contoller in mine with 7psi & 17psi for the exact reason as you want but its not needed as everyone has said before me. tunes it as high as you can go with boost/economy and use your right foot as the tuner.

i learnt the hard way as my switch is alway set to high now...

Dazza

Link to comment
https://www.sau.com.au/forums/topic/343495-nistune/#findComment-5543317
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes.  The only scenario I can imagine when the answer isn't yes, is if you drive like there is highway patrol behind you at all times.  If your car currently runs, enjoy it and keep saving. Better costs more, keep saving until you can budget the better ECU. It's worth it.  Nope. Plenty of us making >300kw on unopened motors. Mine is unopened and makes about 350kw if I turn everything up, its fine (lots of caveats here, how the car will be used/abused, how long you expect the engine to last between rebuilds, how has the engine been maintained prior to coming into your ownership, etc etc).   
    • Sorry just wanting to clarify, at this power goal, which should I be going? Also, More info regarding suspension, the rear upper camber arms were used to get the camber back to i believe around -0.5 ~ -1 degree (@ Road and Race in Rydalmere), I forgot the exact figure, but ALOT less camber than what it came originally which was like -2.5degrees. Are the traction arms still recommended? The bilsteins from SydneyKid, they've got 400lb/in fronts & 275/in in the rear, revalved to his specs. Intercooler, I'm just having a look at some on Rakuten.jp and some other japanese sites. Might get something from back there, GReddy, Blitz or HPI, all crossflow. Looking at roughly $450-$500 AUD + shipping... Theres not many choices except that chinese branded Justjap unless you go for blitz return flow. Yeah, only downside with Haltech is the price ahhaha, so expensive, and with all the sensors if I go that route... $$$$$ yeesh. Are headstuds/gaskets needed for <300akw?
    • Haltech fanboi reporting in. Buy the Haltech! 
    • You can try shoving a borescope down there to see what's up.
    • I could see someone trying this to save money on oil changes.
×
×
  • Create New...