Jump to content
SAU Community

Recommended Posts

EC skid pans Drift your car or ours

Drift . skid pans

EASTERN CREEK - 12th Nov 2010

we will be doing the wet skid pan and the skid circuit (fig 8 /peanut)

if you have questions hit us up

[email protected]

1. Organising Club: DRIVING SPORTS .INC.

2. Type of Event: Drift, Driver Training.

3. Date: friday 12th Nov 2010.

a) TIME: Scrutineering starts from 5:30 pm drift starts 6:30pm end 10:30 pm

4. Venue: eastern creek skid pan and fig 8

5. Track Surface: concrete ( wet ) Direction: clockwise

6. Event Format:

Skid circuit (fig 8 dry) Cars will be divided into groups of 2 based on previous drifting experience In the event that a driver has not competed in this type of event before, he / she may be placed in the “First Timers” groups, to determine their appropriate group, Proposed time of each session is 4 mins.

All drifting will be non competitive.

Skid Pan (wet) Cars will be divided into groups of 4 based on previous drifting experience

In the event that a driver has not competed in this type of event before, he / she may be placed in the “First Timers” groups, to determine their appropriate group,

a) Maximum number of Driver entries for the Event is 28. (4 reserves).

b,Maximum number of Drivers per entrant is 2.

c) Entry fee $150.00 +$55.00 cams licence if u don’t already have one

d ) passengers $50 including cams licence (no passengers unless you have a cams spec minimum half roll cage )

e) Opening date – open

f) Closing date – 12th nov

g) Entries will be accepted in order of receipt, accompanied by the appropriate

entry fee.

. The Club has no facilities for Credit Card payments.

h) Bank Transfers being the primary method of payment.or cash on the day

please do not transfer after wensday the 10th of nov

Heres the details:-

Bank:

Bendigo Bank

Account Name: Driving Sports

Account Number: 137911822

BSB Number: 633-000

if you do transfer cash

You need to e mail us and put your name in the bank transfer as description.

spectators free on the 12th

friday night skids

see you there

Edited by KLR33
Link to comment
https://www.sau.com.au/forums/topic/343624-12th-nov-drift-your-car-or-ours/
Share on other sites



  • Similar Content

  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...