Jump to content
SAU Community

Recommended Posts

Rare Nismo LCD Dash Plus Epson EJ1 Driving Emotion System Suit R33

Dash in Plug and Play (has Power and Ground Connect), Has AV Input

Epson EJ1 System has 5 wires which need to be tapped in the ECU wiring harness (Will Work with aftermarket ecu, was using it with a PFC)

Photo are of acutal dash and EJ1 System (comse with all manuals, wiring harness etc)

4730202889_8fd8c26d12.jpg

IMG_5945 by Kaido_14, on Flickr

4730203437_22698687da.jpg

IMG_5950 by Kaido_14, on Flickr

4730203185_345056c05b.jpg

IMG_5947 by Kaido_14, on Flickr

DSC00122.jpg

DSC00116.jpg

DSC00118.jpg

DSC00119.jpg

DSC00121.jpg

EpsonEJ-1DashInformation.jpg

Complete Setup is very rare, and took me many years of searching to find one and was not cheap

$1150

edit: Dash has 90,800km on it now

Edited by Kaido_RR

Who ever buys this i suggest you use a progamable remote, if you lose the original it is useless and you cant buy the remotes, i spent months looking for one and never found one.

free bump. thats awesome does it work with the R34 with some rewiring??

could wire the epson ej1 system in but im 99% sure the dash wouldn't fit as the r33 and 34 are different

  • 9 months later...
  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hey @Butters, did you end up getting this clutch in ? I have just ordered to a uniclutch track to go in my getrag 6 speed that’s in my BNR 32     
    • I know you don't want to hear this comment, but I can't not say it.  I just can't see 200kw being worth the time and effort. Its like guys with NA cars, putting in headers/exhaust/tune for a massive 20% jump in power. Great, the slow car is still slow and you're down $10,000.  My vote is leave it NA or price in a gearbox upgrade and shoot for at least 300KW, preferably 350KW+.  Now you have a NC that will try to kill you from time to time and will be exciting to drive
    • Ah yep. The main message I want to pass on is, try not to get scared of ghosts when thinking about knock/knock detection.  What I mean is, healthy engines make noise. Knock is also noise. Your knock sensor and ECU combo are trying to determine bad noise from good noise based on how loud the noise is. The factory knock sensors and ECU are not good at doing this.  Modern ECU's are pretty decent at it, however I'd still say that you would want to verify that if your ECU says it's knock, that you actually listen to it and confirm that it is correct.  Are you familiar with the plex knock monitor?  https://www.plex-tuning.com/products/plex-knock-monitor-v3/ I expect you're the type of person that would be very keen to play with something like this. It is great knock detection and you can pop some headphones on and listen to what's going on.  Knock that you've deliberately induced in low load low RPM areas is not really putting anything at risk and is a great tuning/learning/verification tool.  I just thought this was worth mentioning based on the way you were talking about setting up a base map and the Haltech base map settings. There are better ways to spend your time then chasing ghosts and worrying about detonation in scenarios that it is crazy unlikely to encounter it.  I was also wondering, what ECU are you planning to get? Will it be long til you pick it up?
    • This came quicker than I thought. It ain't even 2025 yet.
    • I somehow quoted my post instead of editing it. I regret nothing.
×
×
  • Create New...