Jump to content
SAU Community

Recommended Posts

Hi guys,

Can anyone point me where to find a colour code for nissan skyline V35?I had a look on that side panel door thingy but I couldn't find it

Or if anyone can tell me the colour code for silver v35 would be heaps better

Thanks in advance

Here you go mate:

2006

AY2-Garnet Fire

B21-Medium Blue

B30-Lakeshore Blue

BW5-Twilight Blue

K23-Liquid Platinum

K32-Serengeti Sand

KH3-Black Obsidian

QX1-White Pearl

WV2-Diamond Graphite

2005

KY0-Brilliant Silver

B21-Athens Blue

B30-Lakeshore Slate

QX1-Ivory Pearl

K32-Serengeti Sand

AX6-Laser Red

KH3-Black Obsidian

WV2-Diamond Graphite

2004

KY0-Brilliant Silver

B16-Caribbean Blue

KX6-Desert Platinum

QX1-Ivory Pearl

AX6-Laser Red

KH3-Black Obsidian

WV2-Diamond Graphite

BW5-Twilight Blue

2003

QX1-Ivory Pearl

KY0-Brilliant Silver

KX6-Desert Platinum

B16-Caribbean Blue

AX6-Laser Red

KH3-Black Obsidian

WV2-Diamond Graphite

  • 4 years later...

I don't suppose anyone would know who Nissan Japan use to manufacture their paint.. For example BMW use glasurit. Athens Blue B21 definetly isn't PPG or Standox, as even the best painters in Adelaide cannot match my front guard 100% same colour as the rear bar.

I had splash guards painted by a local auto spraypainter, and I can't tell any difference between them and the colour of the panels. Mine is silver, paint colour KY0.

However, they said the paint code is not enough, they needed my car for half a day to mix the paint to match.

Edited by sonicii
  • Like 1

The Athens Blue has an insanely technical red and green flip. I had reputable Lexus & BMW repairer have it for 2 weeks, prior to that another place. I'm not happy; no one can get it perfect. I just discovered...... Glasurit’s online colour lookup has my Athens Blue (US) / Fountain Blue (Japan) codes under their Glassurit Line 90 & 55 which is quite positive! But i’m not willing to throw cash around like it grows on trees, might wait a while and get them to just spray samples for me..

Paint matching takes time because cars this age are rarely the same colour as when they came out of the factory. There's fade and other issues to take into consideration so a good paint shop will use the colour code as a base guideline.

also, if it's an old chromatic colour, then it can be near impossible to match. Heard of a particular MP3 R34 GT-R needing a colour matched panel because someone drove into them. $12k repair bill - the other guy's insurer would not have been pleased!

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I currently have a 2008 370GT Coupe, with the big brakes (Akebeno if I'm correct), and Its coming time to get new pads. Previously, I had a 2003 350GT Coupe with the stock sized brakes, not Brembos. I had custom wheels on it that were pretty open to the brakes, and when I first put the wheels on it, the rims where completely coated with brake dust. A few years after adding the new rims, I needed to change to pads on that car. I didn't do any research, but I told the mechanic of the problem with the brake dust. I also told him I didn't track the car or even drive around the streets harshley. But the dust was an issue. The mechanics changed the pads to a different compound, and the dust was GONE! The other change I noted was that when coming to a complete stop, instead of having to press harder on the pedal as I approached 0kph, I had to actually lift off a little to not come to a hard jerky stop.( My unfounded explanation is they became stickier as they heated by stopping ) Since I got my 370gt with big brakes, I noticed that that as I came closer to stopping, I had to press harder and harder to reach a full stop. I am not talking about hard, just harder. I brought the car in from another state, so when I had a blue slip done, I asked the mechanic what he thought of the brakes, and he thought they were brilliant. The only negative of these pads on the 350GT, was that they squealed when cold. So driving out of a shopping center carpark, it was a little embarrassing, as the brakes squealed, and I am sure people thought that I needed new brakes, when they were actually fresh. I have no idea of what type of compound they were on the 350gt, but whatever it was, I want to get the exact same on my 370GT. They weren't ridiculously expensive, and were replaced at the local JAX (which is no longer open), so I am certain they would be a pretty common big brand, off the shelf type/brand. My current mechanic suggested I need top get the rear pads changed soonish, but he suggested standard Brembo pads. Which I expect to behave the same as the current ones and not like the ones on the 350GT.  I don't think dust will be an issue on the 370GT. With the behaviour I describe above on the 360GT, does anyone have a suggestion of pad material that will act like the change I had done on the 350GT?
    • The consult isn't even OBD1. It's a Nissan Consult. Proprietary.   Re read everything I've said. I specifically say, put down the laptop/tablet. Understand, and review the issue first. Logging voltages is the same as logging the converted value. Things like O2 that you say to log, is unusable for this, whether it be the voltage, or the value the ECU thinks.   The fact you don't know how to diagnose without looking at the computer, is exactly what I've said multiple times is the issue for why techs these days can't diagnose the fun issues with cars.
    • Breather for it. If it's anything like the GTRs it should run up to the top of a bellhousing bolt.
    • What basics? With these OBD1 ECUs it's not like the ECU will give you any real clues, it's not really doing any sanity checking of sensors/sensor data. My experience is actually a lot of sensors tend to be the source of the issue first and foremost, and checking everything gives you a direction to investigate. MAF/O2/STFT/LTFT should all kind of make sense. You can try little tricks of the trade like tapping the MAFs to see if it triggers a stumble, things like that. But once you've done a compression test knowing whether you have an air leak or fuel delivery problem is kind of hard to narrow down without sensor data. And you don't really know if all your sensors are making sense unless you can interrogate the ECU directly about what it's seeing for sensor data.
    • Absolutely this. Yes, except not vacuum hose. Something oil/fuel safe is a better idea.
×
×
  • Create New...