Jump to content
SAU Community

Recommended Posts

that doesnt make it legal, if you are running another intake mod already ie. front mount that box wont save you from anything. Not sure where your from but in vic anyway.

if you have ONLY a pod filter you dont HAVE to box it for any other purpose then heat soak, which for day to day use is barely worth losing sleep over.

+1 i agree with alex...not worth it..i was think of making one myself...but when my mate done his and th rouble he went through to do it, it wasnt wroth it and it made hardly any difference..

also about it being legal, if the cops know what they looking at, they can easly ask you to show whats inside the box...if there is a pod, bam they will get you for it....well thats what i know....can be wrong...

Fair enough, so what could i do for a cold air intake system without cutting holes?

I've tried putting the pod behind the front bar but when it rains the pod becomes wet.

If anyone has any previous experiences/setups let me know cheers.

Edited by fly333

like james mentioned, check the DIY secition and the guy with username WYTSKY made on for his car and i am pretty sure the cops didn give him troubles...if you not as much of a handy man, i think he can make you one for some extra cost...

here is the link to his DIY

http://www.skylinesaustralia.com/forums/Ne...&hl=air+box

Fair enough, so what could i do for a cold air intake system without cutting holes?

I've tried putting the pod behind the front bar but when it rains the pod becomes wet.

If anyone has any previous experiences/setups let me know cheers.

just use the factory airbox?

solves your problem, works perfectly fine, and then let's you run a FMIC.

win win win really.

^^ What Ash said or,

Remove the heat shield or make hole in the heat shield and put your stock cold air take back on so it feeds air to the pod.

If you feel the need to still have a pod on.

Hi and thanks but wont it be illegal to have a front mount and pod ?

to what i know it is...thats why just get a standard air box...they work perfectly like ash said...his car is a rally quick track car and he uses standard (i think) coz they are better...i have spent money into going standard...so if you are spending money and dont have standard box go standard...otherwise leave it standard... ;)

I've got a proper made one had it for 2 years now and i havent got harrassed. its not legal no because techically your hiding youd Pod filter or one of ur supposed 2 intake mods second being your cooler or CAI. u get caught go put airbox back on and done.. if u have one

Nice mod Arthur...but if you're going to do that, you might as well just use a panel filter? I though the whole point of the pod was to have a loud intake sound...is that any louder than the factory airbox?

LOL NICE.. shine torch down their though gg

Yeah am in process of trying to make some plastic covers as u can just see the filter poking out,

Also to cover the old cooler pipe holes..Bit trickier than i first anticipated, but ill get there..

Edit 4 birds..yeah bottom of airbox is cut out, you can hear it and it draws air from the holes underneath where the cooler pipes used to be as well as the snorkel..I ran it for a bit with panel filter and box stock but it didnt feel as quick..

Edited by Arthur T3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh... literally every time i jump on a forum, see an instagram post or see an engine bay at a car show, i get an idea and add it to my 'to do' list. So what started off as, hey can u just make a couple of intake hard pipes because my dumbass bought the wrong apexi kit, blew out into a 2 week job including braided brake lines & custom bash kit for the front lip haha.  Getting Luke from A4E engineering to make a full custom exhaust with a controllable aes dump valve so i can actually switch between quiet and loud, because right now its just loud all day every day. Then after that go and get the tune redone flex e85 & 98 as i get bugger all milage from e85, makes going for longer drivers difficult
    • Car looks clean as. You ended up getting quite a bit done 😂  So what's the plan for the exhaust? 
    • The only Neo rods that were any different to any other RB25 rods were the DET ones, and they were the same as RB26. Here is a Neo DET rod. O5U part number visible. Here is a post in a thread here on SAU with evidence from someone who has done this before. There are photos in the thread of normal RB25 rods.  
    • Sure, but why assume that will be the case forever? And why assume you'll be able to do an oil change to swap back to a stock drain bolt before that happens? And does it even matter when I change the oil at fairly short intervals? Life can be funny sometimes and unexpected things can happen. Like breaking a collarbone so you can't do any work on your car for a few months but the oil change is due so you have to take it to somewhere and hope they don't do something stupid like stacking the new drain plug washer on top of the old one.
    • Do u know how to identify the rods are rb25 or neo ones? Can u look into the pics and tell me is they de or de neo ones. Its confusing becoz my motor has de neo head but block is 25de 75t, so really confusing me about rods, crank.
×
×
  • Create New...