Garrett Medium Frame Gtx Turbos

[scotty nm35]

I have seen the graphs, hopefully he will post them up soon. Split .82 rear with twin 40mm gates. Full boost by 3.5k sounds like a win for a 300kw turbo.

[34GeeTeeTee]

I have seen the graphs, hopefully he will post them up soon. Split .82 rear with twin 40mm gates. Full boost by 3.5k sounds like a win for a 300kw turbo.

Wow, even with a free flowing exhaust mine would have been at best 3.7-3.8, TS makes a big difference

[Mitcho_7]

Yeh, I thought it'd be nice! Even if you lost 10-15kw worth of flow potential because of the twin scroll it'd still be worth it I think.

Awaits graphs...

Edit: is this the setup status was referring to in the 300kw unopened thread?

Edited June 29, 2012 by Mitcho_7

[BMYHOE]

EPA test is tomorrow morning.. hope it passes....

im going to take the car there nice and warm so the exhaust cat's are heated up and expanded to capture all the crap..

anyone else know of any tricks?

[GTScotT]

I got a car to pass (it should have failed horribly) by putting heat range 5 plugs in it and putting about 1/3 E85 and 2/3 98.

Passed with flying colours.

[BMYHOE]

sweet thats good to know

[NYTSKY]

I personally know of 4 RBs making over 400rwkw with stock bottom ends on E85, all driven very hard.

A nice safe tune on E85 and you shouldnt have a drama. Kinda makes built engines under this power a waste of money lol

[BMYHOE]

I personally know of 4 RBs making over 400rwkw with stock bottom ends on E85, all driven very hard.

A nice safe tune on E85 and you shouldnt have a drama. Kinda makes built engines under this power a waste of money lol

Think i seen you last night going past caltex on canterbury rd around 930pm i was in the white r33.. you almost brought her on boost LOL

[NYTSKY]

Nah not me mate, car has been off the road while new diff and shafts go in.

[SimonR32]

I personally know of 4 RBs making over 400rwkw with stock bottom ends on E85, all driven very hard.

A nice safe tune on E85 and you shouldnt have a drama. Kinda makes built engines under this power a waste of money lol

Didn't you just build your motor? haha

I'm with you though, if and when mine goes pop another stocker is going to be dropped into the whole and probably given more hurt than this one is copping

[34GeeTeeTee]

I'll probably drop another NEO in of mine goes pop but it's tuned safe so will see how long it holds up

[NYTSKY]

Didn't you just build your motor? haha

I'm with you though, if and when mine goes pop another stocker is going to be dropped into the whole and probably given more hurt than this one is copping

Ive had 3 built motors lol

At current Im not sure a stock bottom end would cope with 800hp to long.

[owenliberts]

gt3076 t/s .82 rear

on 98, ethanol tune coming soon

[34GeeTeeTee]

Looks like its all going to plan Owen, cant wait for Ethanol results! It comes on a LOT harder/sooner than mine so the setup certainly works

[owenliberts]

yeah, i absolutely love it! its actually a lot smoother to drive than i was expecting.

Big thanks to trent for the tuning!

e85 gear should arrive next week, then ill book it in for another tune! OH YEAH!

[34GeeTeeTee]

yeah, i absolutely love it! its actually a lot smoother to drive than i was expecting.

Big thanks to trent for the tuning!

e85 gear should arrive next week, then ill book it in for another tune! OH YEAH!

Ha! i was the same with mine, was amazed how smooth it is and its better as a daily than it was before...... E85 will be a serious kick in the pants though if your already getting those results Keep us updated as itll be awesome to see another one up and going!

[AngryRB]

thats a nice looking power curve, how come the torque curve doesnt hold a straight line? is it just different dyno's people are using or is the torque really dropping off

[R31Nismoid]

thats a nice looking power curve, how come the torque curve doesnt hold a straight line? is it just different dyno's people are using or is the torque really dropping off

It's always going to drop off...

It's not a 800hp setup that makes all its power above 5000rpm

[Mitcho_7]

im guessing that graph above is the twin scroll gt3076r on 6boost manifold?

Boost curve looks awesome!

[SimonR32]

It's always going to drop off...

It's not a 800hp setup that makes all its power above 5000rpm

Not always, for instance these 2 cars almost don't drop any torque between 4000-7000rpm

Edited July 4, 2012 by SimonR32