R32 Upper Control Arm Bolts

[Panikin]

Hey there liners,

I am wanting to install the UAS R32 pivoting upper arms(front) & adj. radius rods.

My issue is the camber bushes i am replacing don't use 2 bolts required.

Where do I find these bolts, can they be puchased from the local bolt shop, what length,grade & shaft size?

12mmx M8.8x ???????

Does anybody have some I can take off their hands???

Thanks,

Panik

[Proximity Motorsport]

just measure the lengh you need, and from memory they are 12mm diameter but just check that also. Try get some Metric Fine bolts, i usually use metric fine grade 12.8 cap head bolts, most places will only stock grade 8.8 or possible 10.2 in normal bolts so use cap heads and some good thick high tensile washers both sides with cone lock or nyloc nuts