Jump to content
SAU Community

R32 Gts-t Track Car Stripped With Loads Of Gtr Parts.


Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

Here is an update on what is still available and sold

Here is whats is still available. with some adjusted prices

R32 GTS Nismo Rear wing like a GTR $120

R32 GTS Steering rack with tie rods $60

R32 GTS Brake master cylinder $80

R32 GTS 5 Stud Hubs $50 each side

R32 GTS Bottom door trims $20 pair

R32 GTS Radiator 25mm $40

R32 GTS Clutch master and slave & piping $100

Adjustable front Caster Rods $ 90 Waiting on Payment

Adjustable front camber arms $120 Waiting on Payment

R32 GTR Front calipers with various meaty pads $120 Waiting on Payment

DBA veined rotors 500km old 296mm suit R32 GTR just machined $200

R32 GTR Fuel tank $150

R32 GTR Fuel pump $120

R32 GTR Radiator 20mm $90

A couple of other things

2 x 16" R33 GTS-T standard wheels $50

1 x Yellow space save spare wheel $40

3lt engine rebuilt with forged CP pistons and rings, with a serviced GTR head, GTR inlet manifold and single turbo manifold for T04Z, not used and on engine stand.

R34 GTR original wheels currently being re-sprayed.

Sold

Fully adjustable suspension. Height, dampener and cones with 3 pairs of springs 4,6 & 8 Kg’s 500km old $500

Nismo rear strut brace $100

Front strut brace with brake master cylinder stopper $100

Nismo original plastic rear pods $ 100

Drive shaft $40

Head lights and blinkers L&R $150

Lower control arms $25 each

RB20 turbo $30

Conversion spacer studs to allow GTR rotors and calipers to fit GTS-T $50

Clutch Fan fits all RB’s$40

Gear box $100

3 “ full exhaust with GTS-T turbo header pipe $140

2way Mechanical Diff 4.2, hub to hub with cradle $600

Full oil cooler kit, 300mm x 250mm x 50mm cooler, with sandwich plate and remote filter and oil temp gauge and all hoses $400

FMIC 75mm thick, 600mm x 300mm with piping to engine bay R32 GTS-T will need inlet pipe $140

Set of 4 x white 17 x 8” and 17 x 9” 35mm offset jap racing wheels with worn Dunlop D02 on them.

Pair of 18 x 11” with 295 semi’s and a spare set of Porsche cup 270 slicks.

Pair 18 x 9.5” with Porsche cup slicks.

Front seat with small tear’s $ 90

Black aluminum bonnet that needs a small repair $80

NEW unused Ferodro DS2500 pads $180 (New $260)

Rear Calipers $ 70

Rear rotors $50

Link to comment
Share on other sites

This is all that is left.

R32 GTS Brake master cylinder $80

R32 GTS 5 Stud Hubs $50 each side

R32 GTS Bottom door trims $10 pair

R32 GTS Radiator 25mm $30

R32 GTS Clutch master and slave & piping $80

DBA veined rotors 500km old 296mm suit R32 GTR just machined $200

R32 GTR Fuel tank $120

R32 GTR Fuel pump $100

R32 GTR Radiator 20mm $90

2 x 16" R33 GTS-T standard wheels $40

1 x Yellow space saver spare wheel $40

3lt engine rebuilt with forged CP pistons and rings, with a serviced GTR head, GTR inlet manifold and single turbo manifold for T04Z, not used and on an engine stand.

R34 GTR original wheels currently being re-sprayed.

Link to comment
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • Are these the Dmax ones you are in reference too? https://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35#description Not a bad idea to get the uni flange ones. I have sent just jap an email too. Will see what they say lmao. Only thing is the Dmax ones are on a big back order. Low key anything will be better then my OEM ones I got as they are sounding like popcorn when I go under load lmao 😂☠️🪦.
    • They should do. I have S14 (or something S chassis, anyway) driveshafts in my R32 (because my diff flanges have 3x2). They're the right length. When you go looking for R32/3/4 driveshafts (for turbos), they're all the same thing, so are the same length. So there really shouldn't be any reason why those cheapies from JJ won't also fit an R34. R32/3 NA should also be the same thing. The (3x the price) D-Max ones are uni-fit. They have 5x1 and 3x2 bolt holes and say they cover all the cars. So that would also suggest that they are all the same except for the flanges. And in that case, the flange goes both ways. I'd be buying the D-Max ones if I ever have to replace a shaft. Because that will open up diff options without needing to juggle shafts also. Juggling shafts is gay.
    • Yeah with the adaptors they do look like the photo above - just the fitment within the plenum itself and then further with the rail to the intake is questionable - we shall see tomorrow hopefully once I get some replies from Aeroflow, maybe those bosses are the missing piece....
    • Should be fine, if you have it sitting too far in, you end up just spraying the walls and have shit idle. You "can" run them like that, however I don't think it's a great idea (also depends on your plenum, might be good to just get the injector bosses first, mock it up and see if you need to get the bottom extension) Ideally your injectors, with the extension should look like this  (Not my photos, just Google)
    • Thanks for the replies guys, it's really appreciated.  It seems the kit was supposed to come with those injector bosses but hasn't. Unsure if they'll help as even with the adaptors to make them a 3/4 height injector they still sit too far out so mount the fuel rail?
×
×
  • Create New...