Jump to content
SAU Community

Recommended Posts

i have a thud noise happening when taking off from 1st, not launching or anything, just normal drive off

any suggestions where my search should being, i was thinking possible engine or transmission mount

car has recently been fitted with new clutch and im assuming the workshop would have mentioned if the transmission mount was stuffed

also how hard is it to change engine mounts without removing the engine itself

Link to comment
https://www.sau.com.au/forums/topic/344327-thud-noise-on-takeoff/
Share on other sites

i have a thud noise happening when taking off from 1st, not launching or anything, just normal drive off

any suggestions where my search should being, i was thinking possible engine or transmission mount

car has recently been fitted with new clutch and im assuming the workshop would have mentioned if the transmission mount was stuffed

also how hard is it to change engine mounts without removing the engine itself

My 32 GTR is also making a thud noise and when i looked under i noticed one of the rear cradle bushes was stuffed so i would check there first. I have not changed mine yet, but im 90% sure that's the problem with mine.

My 32 GTR is also making a thud noise and when i looked under i noticed one of the rear cradle bushes was stuffed so i would check there first. I have not changed mine yet, but im 90% sure that's the problem with mine.

tnx for the suggestion, I'm thinking of taking it down for pedders $14 28 point check to get a comprehensive inspection done

I reckon Engine mount. Does it also thud when you let off? (ie Let off gas before changing into 2nd)

Changing engine mounts is easy,

Jack up front, support car on stands

Jack up engine just enough to take the weight (Make sure you have a nice piece of timber to go between sump and jack)

Out with old in with new :laugh:

EDIT: this if for most cars, I just noticed you are godzilla powered, I have never changed a mount on a GTR so you may wanna find some specific info regarding that mate. (knowing how fun they are to work on lol)

Edited by Mandingo
I reckon Engine mount. Does it also thud when you let off? (ie Let off gas before changing into 2nd)

Changing engine mounts is easy,

Jack up front, support car on stands

Jack up engine just enough to take the weight (Make sure you have a nice piece of timber to go between sump and jack)

Out with old in with new :(

EDIT: this if for most cars, I just noticed you are godzilla powered, I have never changed a mount on a GTR so you may wanna find some specific info regarding that mate. (knowing how fun they are to work on lol)

worn engine mounts, will it be visible and obvious when looking at it under the car that its shagged?

anyone replaced them with engine in?

I've got clunks and thuds, and a nismo engine/gearbox mount kit to go in when i find some time. Dont know if it will fix it....

Check out this thread on replacing them;

http://www.skylinesaustralia.com/forums/Cv...20&start=20

I've got clunks and thuds, and a nismo engine/gearbox mount kit to go in when i find some time. Dont know if it will fix it....

Check out this thread on replacing them;

http://www.skylinesaustralia.com/forums/Cv...20&start=20

u beauty, was looking for this tnx

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I might have to shoot them an email. Pity the exchange rate is so bad at the moment. BTW, thanks for posting that table makes interesting reading. 
    • Add these Sensors -Wideband, Oil Pressure, Fuel pressure, Intake air temp Good inspection of ignition system of coils, plugs and loom (12v feed and good ground)- a r35 kit is best bang for buck upgrade. A decent tuner should be able to see any issues with the trigger system- a link has good filtering but a good simple upgrade is the nz wiring bolt in kit. Check and replace all the fuel filters- you would be surprised at intank filter after a few years. Also good to check for any leaks on vac hoses and pipe work as has been said. No need to go overboard and spend big $$$ to enjoy the car. A quality tuner is getting harder to find as anyone with a laptop thinks they are a tuner. A link has great features to check sensor voltages and frequency inputs and easy to see live by pressing f12. The link can do a TPS & RPM fuel/ignition mapping on ITB cars then add a 4D table with MAP and ability to add a 5D to it (can help with economy at cruise with wheel speed vs TPS) Where are you located as that will help narrow down a good tuner ?
    • Reviving an old thread, I reckon my stagea is starting to slip. Car usually gets parked on a hill, narrow driveway so cant go up the driveway smoothly, anyhows, lately first gear feels "sluggish"? Not responsive. Feels like I gotta run the engine more than usual to get off the line...  Any recommendations for transmission servicing in Sydney? Or possibly just an excuse to go manual ?
    • Well, moulded carpets should fit well if the buck they use is the right shape. The finish is then just a case of stiching the trim around the edges. Shuoldn't be too hard to get it right. Back in the day, replacement carpets were all "fitted", in that they were stitched together, with cuts and slices taken out to make them form the shapes. Many more opportunities to get it wrong, hence all the concern over good vendors and bad vendors.
    • A timely blog via AASA (keeping in mind they sell brake fluid of course...) https://www.msbgarage.com/blog/news-and-blogs/brake-fluid-what-should-i-use/
×
×
  • Create New...