Jump to content
SAU Community

Recommended Posts

Hi there,

I've been in the market for a car, and I've seen heaps of advice surrounding what to look for when purchasing. A lot of people seem to emphasis the fact not to buy a car that has been crashed and repaired. Excuse my ignorance, but what is the stigma against this? I thought that as long as it was repaired by a decent mechanic, it should be as good as non crashed cars?

Any info would be great.

:D

its not a "stigma" per se, but good luck getting any one to insure a) an import, and b) one that is a repairable write-off. just wont happen. ive never done it myself, so i cant say exactly, but i dont see it being a very good idea at all.

ehhh how do insurance companies know? i mean u do everything online and it only asks if the car has any existing damage. I think that people dont like buying repaired vehicles as the repair may cause problems latter down the track. But saying that if i knew the car had a major repair i still wouldnt buy.

Say you have a front end crash, all that metal gets pushed back from the impact. You're always gonna have more damage on one side no matter how slight. Unless the repair was done properly, ie pulling the metal back to factory dimensions, the car will have uneven shock tower distances on each side... which will affect handling and so on and so forth...

its not a "stigma" per se, but good luck getting any one to insure a) an import, and b) one that is a repairable write-off. just wont happen. ive never done it myself, so i cant say exactly, but i dont see it being a very good idea at all.

That's completely incorrect, I've bought my own car back from an insurance company, it was a repairable write off (due to the cost of repair exceeding the value of the vehicle).

I then had it professionally repaired, took it back to THE SAME INSURER, and they happily re-insured it for more than it was worth before the accident. At the same time I put on a new roof skin to get rid of a poorly fitted sunfoof. All they wanted was evidence that the repairs had been done in a professional manner. This was easy as I had reciepts for all the new parts and for the repairs.

The car looked brilliant and drove perfectly, because the job had been done properly.

If your repairer knows what they are doing, there is no risk in driving a repaired car. The risk that people are referring to comes from poor quality repairs, done by cowboys in their backyard. Most of these types of repairs are easily spotted if you inspect the car carefully.

The hallmark of a well repaired car is, the repairs are normally indistinguishable to the unrepaired part of the car. If I didn't know who had repaired a car I was looking at buying, I would probably avoid it, but that would only be in the case of a major (structural repair) fix up.

Most cars of a certain age will have had a parking dent repaired, or a bumper replaced, normally you can use these kind of things as bargaining chips when negotiating price.

At the end of the day it's a bit like the old "never been driven in the rain" kind of thing, just because someone tells you a car has never been crashed; doesn't mean it hasn't. Conversely, just because a car has been crashed; doesn't automatically make it an uninsurable deathtrap.

If you're not sure, have the vehicle professionally inspected, if you're still not sure, keep looking. Better to wait and get something you're happy with, rather than buy someone elses problems.

Edited by Daleo

i think a hell of a lot of skyline owners would probably be rather upset to find out that their cars have been in accidents. might not have happened in australia though, so they sort of forget that the cars had a life in japan before being here. they sort of just take it for granted that the car was never crashed in japan and that the kms on the clock are legit when they get it.

as for buying a previously damaged car, it really comes down to how bad the damage was. there can be cars that are classed as written off with no structural damage at all, purely panel damage. my mothers car was nearly one of these. it was temporarily written off after an accident before the insurance company changed their mind and fixed it. the damage was confined to the passenger rear 1/4 panel, tail light, bumper and boot lid.

thought u couldnt import cars taht had been in an accident and get them complied?

aside from that id personally stay away froma repairable writeoff unless it was dirt cheap but something thats had some panels changed big deal its liks changing ya clothes

Say you have a front end crash, all that metal gets pushed back from the impact. You're always gonna have more damage on one side no matter how slight. Unless the repair was done properly, ie pulling the metal back to factory dimensions, the car will have uneven shock tower distances on each side... which will affect handling and so on and so forth...

In order for a repairable write-off to get registration it has to pass an inspection. If the repair was as shoddy as you describe (uneven shock tower distance to the extent that it effects alignment and handling etc) it will not pass inspection because it is not safe.

Edited by GHOSTrun
  • Like 1

you could get cars that have been in an accident that weren't written off like that though. i've seen a few cars with coil-overs fitted where the camber adjustment one 1 side is maxed out just to get standard camber, while the other is normal. one had obvious signs of front end damage, the other had no visible signs.

^ That is because it was a shit job.

There is no real stigma, It's just that most of the time it costs more to fix properly. I mean take a R33 GTS-t, to fix one tahts been in a reasonable hit to the left/right front you'd be looking @ upwards of 6-8k properly done with a bent rail etc.

So i say - AS IF someone is going to spend that money fixing properly when its over half the value of the car.

I've seen personally SO many poorly repaired cars, and not just skylines either. It happens all the time and a lot of people are unsuspecting/don't know what to look for and the end winner is the workshop making easy money of half assed work.

2 years down the track you find out the rails are bent, parts replacement has been skimped on (2nd hand wrecker parts that are clearly poor) and stuff doesn't line up properly

^ That is because it was a shit job.

There is no real stigma, It's just that most of the time it costs more to fix properly. I mean take a R33 GTS-t, to fix one tahts been in a reasonable hit to the left/right front you'd be looking @ upwards of 6-8k properly done with a bent rail etc.

So i say - AS IF someone is going to spend that money fixing properly when its over half the value of the car.

I've seen personally SO many poorly repaired cars, and not just skylines either. It happens all the time and a lot of people are unsuspecting/don't know what to look for and the end winner is the workshop making easy money of half assed work.

2 years down the track you find out the rails are bent, parts replacement has been skimped on (2nd hand wrecker parts that are clearly poor) and stuff doesn't line up properly

if it was done under warranty then it isn't easy money for half assed work, it is often shit money so they do a shit job. most insurance companies tell the panel beaters how long it should take to fix the car and how much they are going to pay per hour to do it and only pay them that, even if it actually takes a few hours more. a good mate of mine is a panel beater and said that the days of over charging insurance companies for work done is long gone. the insurance companies even pay the same rate per hour for a pearl paint job as a flat colour, despite the pearl requiring more time to do. the insurance companies will even tell them not to fix some damage if they don't think it was caused in the accident, even if it obviously was.

To an extent, however one of my good mates runs a panel shop and has no mind blowing issues with insurance companies and this isn't some low grade/cheap panel shop either. Ye there is some here/there but that's part of it all. You win some, you lose some. I fail to see how its shit money even half the time.

Granted he is looking after imports/resto's which basically means Just Cars/Shannons, but that's the topic at hand here mostly.

He's even done work on a friends Mazda 626, was AAMI. He has no issue making good profit on it, and it was repaired perfectly without much issue from them either. Charging his normal workshop rate which i can assure you is higher than the "cheaper" places around that do $1500 "resprays" :D

They do not pay the same rate for a pearl paint that requires more time. That is costed and factored into quotes.

If its not, then that's the panel shops management as opposed to Insurance companies.

I've seen some BIG hit's fully repaired. Brand new everything from Nissan as part of the repair. And this is on cars only worth 30-35k agreed.

Well over 10k being dropped by insurance companies without question.

Now if one workshop can get 10k for a job, but another couldn't - nobody's fault but the shop in question.

To an extent, however one of my good mates runs a panel shop and has no mind blowing issues with insurance companies and this isn't some low grade/cheap panel shop either. Ye there is some here/there but that's part of it all. You win some, you lose some. I fail to see how its shit money even half the time.

Granted he is looking after imports/resto's which basically means Just Cars/Shannons, but that's the topic at hand here mostly.

He's even done work on a friends Mazda 626, was AAMI. He has no issue making good profit on it, and it was repaired perfectly without much issue from them either. Charging his normal workshop rate which i can assure you is higher than the "cheaper" places around that do $1500 "resprays" :)

They do not pay the same rate for a pearl paint that requires more time. That is costed and factored into quotes.

If its not, then that's the panel shops management as opposed to Insurance companies.

I've seen some BIG hit's fully repaired. Brand new everything from Nissan as part of the repair. And this is on cars only worth 30-35k agreed.

Well over 10k being dropped by insurance companies without question.

Now if one workshop can get 10k for a job, but another couldn't - nobody's fault but the shop in question.

he may be dealing with insurance companies that will pay extra, but the ones my mate does work for pay the flat rate. he will quote them for the time it should take, however they can turn around and say "no, we are on'y paying for XX amount of hours to paint it".

i'm also not saying they aren't making a profit as they still would be, but it certainly isn't like what people think where they charge double what they would charge a regular customer. often they don't charge much more at all.

as for the cheap respray bit, why is it that the moment you tell someone about cheaper priced place they automatically think that it is going to be shit. i've had some cheap work done in my time and it's been better than some of the work i've seen from places asking twice the price. a cheaper place may do just as good of a job as a more expensive place, just simply not have as higher hourly rate because they aren't as greedy. look at car dealer workshops. they often charge a lot more per hour than other workshops, but that doesn't mean they will do a good job. a lot of the time they will do a worse job because they simply don't give a shit, yet a smaller workshop will do a good job because if something goes wrong it's coming out of their pocket to fix it.

if its been in a smash and repaired right, then you're not going to know anyway. 99% of all cars out there have been in mishaps - accidents are un avoidable. i know of quite a few cars under a month old that have been smashed, and come back from the repairer with straighter bodies than new. panel beaters are good ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to update. I ended up removing it and found out that it's dead. The car seems to run better than it did, although I haven't driven it hard yet. Literally just a flow restriction.
    • Sounds like the rack seals blew.
    • ^ This is all good advice. I can imagine that there's some passive components in the HVAC controller that run that PWM output that could die, or suffer bad solder joints. It can be worth opening it up, taking a schmooze around looking for swollen electro caps, evidence of liquid escape anywhere, tracks that have been hot, lifted, cracked, etc. A DMM might not be suitable for seeing if the PWM output is pulsing. Might be too fast and too low voltage for a DMM to keep up. An analogue voltmeter might give a better hope. I use a handheld oscilloscope (<$100 from Aliexpress if you want something cheap). A DMM might see the voltage across the motor flicker. Otherwise, as above. If you can successfully see PWM action, then the control side should be good. If you can't see it with what you have, you might need to step up the instrumentation used, as above. Beyond that, and dbm7's advice on testing the motor directly, you're down to looking for broken wires, corroded connector pins, etc.
    • So Thanks for the comments etc. To follow up on this, we went down the path of fitting a divider down the middle of the external pipe that was added to the exhaust manifold and the divider went from very close to the external wastegate all the way up to the "V" part where the pipes from each side of the manifold joined. After this modification it was finally in a position to do the dyno-tune with some degree of success. Top end power was down about 10kw (250rwkw down to 240rwkw) I believe from previous but it seems to be more responsive lower down and at least it is now driveable and fun and back on the road to be enjoyed. Apparently the timing couldn't be run the same as it was running into knock and boost was down about 1psi. For all we know this could have been from the fuel being a bit older, or perhaps some slight complication from the new head gasket as we didn't have compression figures from before that mod to compare. I'm no mechanic and this is second hand info but I just wanted to follow-up to those that commented or read the original post with interest. After so many months of stuffing around this is a big win. The interesting part was most of the info around this was gained from information around Barra motors and not GTR as the manifold setup on the Barra with single turbo was more similar.  Thanks for those that helped with info. Regards Rob 
    • G'day ... first up, I very much doubt that's a resistor network (as used also for this job), but the part# looks right. The description of 'power module assembly' looks to be nissanese for 'PWM driven, ground switched, DC motor speed controller'.... the circuit in the schematic kinda infers that's the case... ...with the transistor symbol appearing in the unit described here as 'Fan Control Amp(lifier)'....being driven by pin20 on the HVAC unit,  and a feedback signal on pin19 from the motor negative terminal for some reason (might be motor fault detection, maybe they detect commutator switching to determine motor revs as well, I dunno)... but if they are  counting commutator spikes, a bad segment (or really worn brushes) will throw a spanner in the works... The motor itself will as said be brushed DC with segmented commutator, rated at 12VDC nominally ~ now-a-days I just unplug them, determine the positive wire, and hook them up to a variable power supply and find out how much current they draw, if they work etc etc ...you can also check for bad segments...ie; set the power supply up to feed 1volt @ 2amp max, then watch the wattage count as you slowly rotate the fan blower motor through a complete revolution ; any bad/dead segments will be clearly evident...some folks would just say determine the positive wire, and feed it battery voltage, and if fan spin, you've got a win...<grin>... well, at least that infers it should do something when plugged back in, and the HVAC unit commands it to run... and if it doesn't, you suspect the module, but you should check the PWM signal on pin20 is actually present, and if it is, blame the module ...  
×
×
  • Create New...