Jump to content
SAU Community

[sydney] R33 Gtst Series 2 Parts Fs


Recommended Posts

Hi all.

Given the all go to sell the parts from my car. All parts are from a series 2 and standard unless otherwise specified.

So far Ive got the following to sell:

LHS Headlight $200ono

RHS Headlight $200ono or both for $370(Comes with HID kit)

BuddyClub P1 17" Wheels $1700ono with 4 Kuhmo Ku31 tyres(assessed at 70%)

Cluster showing 119xxxkm: $150ono

Hybrid? Intercooler + piping: $450ono.

Apexi Power Intake filter thing: $40

Driver Side Seat, ok condition, has the tear in the typical right hand elbow area: $60ono

There are alot of other parts Ive gotta sell but at the moment it might be hard because the car is in my drive way and its literally impossible to lift. I will update this later on. Eventually the whole thing has to go, I will be keeping the exhaust system, turbo, ecu, maybe the injectors and z32 afm.

Please contact me here, via pm. If its small, ill post it off otherwise its gotta be picked up. I'm in the Parramatta area.

I will provide my contact number via PM if required. If parts come to head I will update asap otherwise shoot a reminder to me. Remember its mainly the smaller, easier to remove parts I'm ripping off(inside the car, engine bay from top etc). The whole passenger side is f**ked, back seat is f**ked, panels are f**ked, no lining in boot.

  • Like 1
Link to comment
Share on other sites

Bump guys.

Pulled off the turbo today + fmic + wheels + front bar. Reo bar is not worth selling.

I will be selling the turbo. High flowed turbo with Garret GT3071 internals. Its from a VL turbo. Before I bought the car I was told it was rebuilt about 15000km before, Ive put about 7000km ontop of that. Was designed to run 19psi but with my mods it was limited to 15psi. Very minimal shaft play, includes the bango bolts for water and oil. Great upgrade to really up boost. I don't know what its worth but Ive seen other high flowed turbos going from 900 - 1500. Ill put this one up for $1000ono. Ive got a stainless steel dump which was custom made for it. The turbo has two studs which need to be removed. Pretty quick spooling boost. It was always ran with a BOV. Also have a suitable aluminium intake pipe to suit the R33.

So the amended for sale list everything above + the following:

Rebuilt turbo with Garret GT3071 high flow internals $1000ono

Brand new top high mount manifold with 38mm external WG outlet $150ono(from justjap)

Cat back Kakimoto exhaust system "Silent High Performace" cannon/muffler. Really deep throaty sound, includes a catco cat: $650ono

Stainless Steel Dump pipe: $150

Front Strut brace: $70ono

Aluminium Intake Pipe(awesome sound): $80ono

Cluster showing 119xxxkm: $160ono??

Front bar with fog and indicator lights, has bottom scratches + cut to suit FMIC: $250ono *Interest Shown*

Genuine R33 leather gear surround, good nic: $40ono

Pix below, REASONABLE OFFERS WONT BE REFUSED! THIS STUFFS GOTTA GO! Soon I will have the engine, box, DBA slotted front rotors up too + alot of other things. I'm forgetting alot of parts here lol. Remember most things are really dirty, this has been sitting still for about 2 - 3 months now. The P1 wheel which I am showing is the back left one, it suffered the most(only) damage. All others are relatively mint condition.

P.S How do I edit previous posts? The edit button isnt there!

post-68383-1290326945_thumb.jpgpost-68383-1290327074_thumb.jpgpost-22515-1125481268.jpg

post-68383-1290327379_thumb.jpgpost-68383-1290327398_thumb.jpgpost-22515-1125481268.jpg

post-68383-1290327443_thumb.jpgpost-68383-1290327457_thumb.jpgpost-22515-1125481268.jpg

post-68383-1290327487_thumb.jpgpost-68383-1290327501_thumb.jpgpost-22515-1125481268.jpg

post-68383-1290327527_thumb.jpgpost-68383-1290327540_thumb.jpgpost-22515-1125481268.jpg

post-68383-1290327563_thumb.jpgpost-68383-1290327573_thumb.jpgpost-22515-1125481268.jpg

post-68383-1290327598_thumb.jpg

post-68383-1290327095_thumb.jpg

post-68383-1290327425_thumb.jpg

post-68383-1290327475_thumb.jpg

post-68383-1290327512_thumb.jpg

post-68383-1290327552_thumb.jpg

post-68383-1290327586_thumb.jpg

Edited by SargeRX8
Link to comment
Share on other sites

ALL PRICES ARE NEGOTIABLE! I WILL NOT REFUSE OFFERS! PLEASE THIS STUFF HAS TO GO.

THERE are HUNDREDS of other parts I need to pull. The whole car is being wrecked I'm just slow at taking everything off but if you PM me parts to rip off or post here, ill put a pic and price for you. You may come view the car and salvage parts you need but remember PASSENGER SIDE OF CAR IS REALLY REALLY BAD! Rear tail lights are fine!

Link to comment
Share on other sites

I'm interested in the front strut brace and the 233 leather gear surround. I can't PM yet, can be contacted via [email protected], or 0407 201 729, and live at Barden Ridge (near Sutherland/Padstow)

Andrew

Hey mate, Added you on MSN. Ill send you an email now. Parts are yours, can pickup(merrylands) when ever you want or post if you like. Email me or sms me, my number will be in the email. Cheers.

I'm available tonight and possibly tomorrow all day/night for pickups!

Link to comment
Share on other sites

PowerFC ECU with tune(No hand controller): $1100ono

Greddy Profec 2 Spec B boost controller(setup for low 13 high 15): $300ono

Bilstein Shocks(height adjustable?) + Whiteline springs: $800ono (no leaks, very firm, rear passenger tower needs to be inspected).

More parts will be added soon! Alot of interior dash wise parts need to go!

If you need pics, don't hesitate to ask me!

Edited by SargeRX8
Link to comment
Share on other sites

Hi all.

Given the all go to sell the parts from my car. All parts are from a series 2 and standard unless otherwise specified.

So far Ive got the following to sell:

LHS Headlight $200ono

RHS Headlight $200ono or both for $370(Comes with HID kit)

BuddyClub P1 17" Wheels $1700ono with 4 Kuhmo Ku31 tyres(assessed at 70%)

Cluster showing 119xxxkm: $150ono

Hybrid? Intercooler + piping: $450ono.

Apexi Power Intake filter thing: $40

Driver Side Seat, ok condition, has the tear in the typical right hand elbow area: $60ono

There are alot of other parts Ive gotta sell but at the moment it might be hard because the car is in my drive way and its literally impossible to lift. I will update this later on. Eventually the whole thing has to go, I will be keeping the exhaust system, turbo, ecu, maybe the injectors and z32 afm.

Please contact me here, via pm. If its small, ill post it off otherwise its gotta be picked up. I'm in the Parramatta area.

I will provide my contact number via PM if required. If parts come to head I will update asap otherwise shoot a reminder to me. Remember its mainly the smaller, easier to remove parts I'm ripping off(inside the car, engine bay from top etc). The whole passenger side is f**ked, back seat is f**ked, panels are f**ked, no lining in boot.

have you got the clutch padel, clutch master cylinder??? how much are they

Link to comment
Share on other sites

Cmon people! I need parts gone. Someone buy the intercooler. Buy the turbo. The exhaust. Offer me prices.

One thing I found out on the exhaust though, the catco cat has been gutted lol. Also I pulled out the suspension, shock and spring on impact side look like theyre in fine condition!

Link to comment
Share on other sites

$50 plus postage for the cluster?

$50 is way too cheap man. I want $130 for it. I checked all over eBay, average price is 130 - 170 with 140xxxkm. Found one for $50 on ebay but its not calibrated and the rev tacho doesnt work. Mines perfectly working, includes 5 LEDS which go from BLUE RED BLUE RED BLUE + original bulbs, 119xxxkm, very clean.

No one interested in the wheels + tyres? Cmon make offers, they look great, weigh about 6.8kg without tyres.

Edited by SargeRX8
Link to comment
Share on other sites

how much meat left on pads man ? cant do any better on price? wreckers quoted me $200 for pair from lansvale cheers

Looking at them, they still look healthy. I can pull of the caliper and get you a pic. I'm pretty firm on the price man, I don't compare it to wreckers coz they simply pull of and sell them as is...

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • Yeah they sure are available for import now, its great news Matt, You need an import specialist insurer, nothing has really changed over the years about the mainstream insurance companies not touching them. I have my cars with Lumley (same group as NRMA etc) because they insure imports and have a good concept of "stable use" where as long as no more than 2 cars are being driven each day you can have them all on a good rate, I've also had no issues with claims through them. Note they won't insure a car if you take it to the track, even for an off track claim. Shannons are another option but I had a lot of trouble with their claims (they were happy to take the premiums, not so keen to pay out), and I'm sure there are other import specialists too 
    • I'm a lifelong home drummer, was in a couple of bands as a teenager/early 20's then moved to Japan and didn't play at all until 2019 when my missus and I were invited to check out the band room upstairs at a restaurant cafe here in JP. They had a full acoustic drum kit and they let me have a bash for about 20 mins. I went away from there wondering how I could not play for 19 years.... Missus bought me a e-drum kit a few weeks later (Yamaha DTX402) which is basic but lets me play at home in my tiny Japanese house.  Also have an Epiphone Les Paul and little Vox amp and delay pedal I bought for the missus because she wanted to learn to play the guitar, but she never got into it. That was about 8 years ago. I taught myself to play some 80's U2 song riffs like the Fly solo, etc and some other things but being a drummer I don't really have the dexterity in the fingers lol. Ham fisted if you will. So I kind of just mess around with the guitar rather than try to seriously play complete songs. My son on the other hand inherited all my side of the family's musical talent and is a brilliant classical pianist at 16 years old. He'll go on to do something in the music industry here for sure once he finished his schooling. I got him a Yamaha NU1XA hybrid piano earlier this year.
    • If the BOV is plumbed in as mentioned, like stock.... why exactly would it stall? It'd be like stock. Do stock cars stall with stock bovs?
    • You mean a rich spike, as the air has been metered multiple times due to the turbulent air, you end up injecting more fuel causing a momentary dip in torque and quite possibly a stall event. TL;DR, install a Haltech Elite or S3 or R3, convert to DBW, throw all ancient shit into the bin and enjoy the car.
×
×
  • Create New...