Jump to content
SAU Community

Recommended Posts

Umm possibly not. You really need to give a better description of what went on. did you just come out to drive it this morning and it wouldn't go? were you flogging it last nite and it made a bang and would't go? could possibly be a drive shaft/ tailshaft or input shaft from the gear box all of which would have made a bang if they broke.

tell us more dude, also from sig I'm guessing a GTR?

ok this is what happen i try to test my clutch if it is slipping so i start on third gear and revved and i heard nothing and the car just revs and dont go anywhere so i pulled over to the side and put in gear and leave the clutch and it didnt stall so i try every gear and it didnt stall so i assume its not even in gear and it is the gtr

hmm so it was driving fine before you stopped (at a set of lights) ?? and put it in third to take off? and it is a GTR?? more details dude. and by the way you should put it in 5th and let the clutch out to see if it is slipping. but really a slipping clutch on a car with any decent amount will easily be felt when it comes onto boost.

Thinking about it... is the clutch fluid full? did you get under the car and see if there is any fluid leaking? is there any kind of a smell? when the car is ideling put the clutch in and out, maybe in the garage or in a confined space so you can hear any different noises it makes while you do this.

It does sound like the clutch to me, This also happened to me in my old car. But i might be wrong.. Dont take my word for it and go changing your clutch :Oops: .

I feel for you dude.. Just picked up your car didnt you? Black smoke coming out and now having more problems... :goddam:

which part is clutch fluid and yeh it had smeel since i bought it and there is no leakage as i can see it but i am getting it towed tommorrow since i need it but i just want to determined the probs first i guess thats what happen if you buy those 89 gtrs hope nothing else arise

do u have a clutch pedal at all? Ur cable could be broken? The throwout bearing used to get stuck with my old brass button when i got the car and i would have to stop on the side of the road. Way i would overcome it was, turn the car off put it in gear and start the car in gear so it jumps abit but then change gears once with no clutch and it went clunk and pops back into place, doesnt sound like ur prob but hey u never know. My clutch lasted for ages one it started slipping, so i find it odd to have it just fail without warning on u, maybe there is more to it. good luck in finding the prob

only thing i can thing that it could be, that u blown the synchromeshing or the actual linkage to the gearbox, and no it doesnt sount like a clutch, cos if it was clutch the motor, you will hear it rev up and spool up but not move fast at all, so therefore im pretty sure its not the clutch but the box, u might wanna check that to, it happened to me in the laser, (yeah i know a laser is diff to a skyline, but after a 1 grand super single clutch, i knew it wasnt the clutch, and i blew the synchromeshing)

One of two things:

1. Broke the centre out of the clutch's driven plate.

2. Broke the input shaft to the gearbox.

Junkie, you still haven't made it very clear what went on prior to you getting no drive from the gearbox. If you were caning it, then we need to know stuff like that before we can make a diagnosis. It's like going to the doctor and simply saying "I feel crook in the guts". Doc can't very well diagnose what is causing it with a statement like that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hmm. Yes. I should have been clearer. 1000s for Haltech, for extra headroom. 725s for Nistune. You might even be OK with 640s, but if the possible power ends up much more than 300 rwkW you will run out of headroom on the 640s. That would probably be OK and a signal to not push it to that sort of power with Nistune anyway. At that level you probably do want to be thinking about engine protection functions. Oh, and all of that presumes 98 only, not E85. Well....the 1000s would allow you to run E85 at ~300rwkW territory, again, maybe sort of running out of headroom. Hard to tell with E85 - depends on the tuner as to how rich they like to set it up.
    • Yes.  The only scenario I can imagine when the answer isn't yes, is if you drive like there is highway patrol behind you at all times.  If your car currently runs, enjoy it and keep saving. Better costs more, keep saving until you can budget the better ECU. It's worth it.  Nope. Plenty of us making >300kw on unopened motors. Mine is unopened and makes about 350kw if I turn everything up, its fine (lots of caveats here, how the car will be used/abused, how long you expect the engine to last between rebuilds, how has the engine been maintained prior to coming into your ownership, etc etc).   
    • Sorry just wanting to clarify, at this power goal, which should I be going? Also, More info regarding suspension, the rear upper camber arms were used to get the camber back to i believe around -0.5 ~ -1 degree (@ Road and Race in Rydalmere), I forgot the exact figure, but ALOT less camber than what it came originally which was like -2.5degrees. Are the traction arms still recommended? The bilsteins from SydneyKid, they've got 400lb/in fronts & 275/in in the rear, revalved to his specs. Intercooler, I'm just having a look at some on Rakuten.jp and some other japanese sites. Might get something from back there, GReddy, Blitz or HPI, all crossflow. Looking at roughly $450-$500 AUD + shipping... Theres not many choices except that chinese branded Justjap unless you go for blitz return flow. Yeah, only downside with Haltech is the price ahhaha, so expensive, and with all the sensors if I go that route... $$$$$ yeesh. Are headstuds/gaskets needed for <300akw?
    • Haltech fanboi reporting in. Buy the Haltech! 
    • You can try shoving a borescope down there to see what's up.
×
×
  • Create New...