Jump to content
SAU Community

Recommended Posts

  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Having had an R34 with Xeon lights all I can say is once you've experienced it everything else looks pretty weak.

There seems to be some misconception on this site about these lights.

Firstly they are only permitted for low beam as the startup time delay makes them useless for daylight flashing use.

Your Highbeams are a separate globe and from memory the '33 turns it's lowbeam off on highbeam. If this is so just rewire the lowbeams to stay on.

No way will wiring melt, these globes are 35W not 55W halogen and even accounting for ballast losses the total current draw will be less than halogen.

On startup they may draw more power until up to operating temp but that's about a second only.

The pits can pick you for them if they really want too but it seems strange that BMW's Audi's and Lexus run them stock.

If hassled just revert to halogen temporarily.

They are a great safety benefit so any reasonable pit inspector would let them pass.

Cheers

I just recently installed HID in my R33. Highbeams work fine.

Have been past many cops and haven't been picked up yet. The only attention I get is from other cars and pedestrians due to superiority of light compared to the halogen. Make the car look really cool at night..

It would be interesting to know the legalities as they are pretty damn bright!

nah i was saying that from the lil animation on the site, it was saying how it doesn't allow the use of highbeam, or some utter shit like that, i now truly believe the meaning of don't always believe what you read :bonk:

adrian :D

OH MY GOD

For those that have NOT seen xenons in an R33, see if you can hook up with Chris (CC).

Just went for a spin with him following me and then he took me for a drive, and OMFG!! It is totally amazing.

My girlfriend is going to totally hate me now, because I need xenons. It's that simple.

Jason - didn't evolution R muck about a bit before it got it's act together to provide the dials for the last group buy? or am I wrong and should be told to shut up? :rolleyes:

it was car quest that did the mucking about cam, evo r seem to have caught the same bug that raymond has...it seems.

how many are outstanding now.

Jason....xenons....will they help you keep up with all the other skylines on the cruise. or are you intending to just fall behind and then fry them with light power

i guess if you install the HID kit, and then angle your lights a little more down than usual, especially in a series II with the different headlights then you could prolly get away with it.

the brightness that is

  NO_RSPECT said:
i guess if you install the HID kit, and then angle your lights a little more down than usual, especially in a series II with the different headlights then you could prolly get away with it. 

the brightness that is

tilting the lights down does very little as HID throws light out in all directions..

when I tried to get mine levelled, it came up with a blank reading..

i think a special headlight assembly is required, but not 100% sure

I've just spoken with the Technical Department for Vehicle Examinations in Welshpool and have been advised that:

1. Changing Halogen to Xenon is acceptable, only if the Xenon kit complies with ADR (Australian Design Regulations)

2. They will not supply that in writing, because if the product complies WITH ADR, there is no need for you have it in writing.

It was recommended that I contact places like Hella etc, who make Xenon kits and to discuss with them the situation, and because they are fully aware of the ADRs, they should be able to provide me with any further information.

Later today I will contact Hella and possible Bosch, Panasonic and Phillips (all of whom I have seen have some part to play in the creation of Xenon kits, be it the Ballast or the Ignitor systems) and see what I can find out.

Hicks, not all of us have disposable income to go out and purchase things we want/need at a drop of a hat. Xenon lights up the road so much better than Halogen lights, and as I enjoy night cruising, I feel that is it something that *I* need.

  Hicks said:
That sounds like a bit of a stupid f#ckin thing to spend money on, especially if its takes ya 8 months to save the money up.

Just my opinion.

hahaha.

the ever outspoken hicks. tell us what you think mate!

:singer:

:soapbox:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This was a huge help.  We followed the steps,  although shifting into 2nd was actually into 3rd for us,  and 1st was into 2nd ( steps 9 and 11) .  The long flash was the 4th flash.  So shift solenoid A is possibly the culprit.  Is this inside the transmission itself? Or is it accessible by just front the pan? Or is it bolted to the outside of the transmission?  Thanos for your help everyone
    • Can you enlighten me on your best practice regarding these hoses? I don't wanna make the same mistake if you already got a better solution.
    • I have some silicon hoses already, for example engine to watercooler. But yeah, I get the sentiment. The lower intercooler silicon hose is drippy too, despite not being very old. Does anyone except Nismo make these same lines out of rubber? Long term I think they'd be the better replacement, especially since the car won't live as hard a life anymore as in the past nor be driven as often.
    • I know most issues are just age related. But for example the turbo oil drains, there is dash adapters for these and you can just make a braided teflon line for them and (probably) never have them leak again. Also not terribly expensive. Can you even get the factory hardlines from new? Or are they repairable if they break?
    • I know it'd be much much easier with the tool. I hope I can find one that won't take 3 weeks to get to me an isn't a "Asian models kit" that has tons of (to me) useless adapters for a load of cash.   It's a summer project/fun car. I do wanna enjoy it, without endless downtime over and over. So yeah I would even go and buy an engine crane + stand to save myself the trouble of hard to reach or unreachable places going bad later on. Would also be a good opportunity to put on a Fluidamper, renew the mains seals and stuff like that. I have some money on the side that I can use for that, what I wouldn't want to or be able to do is let everything be done by a shop or have my engine completely rebuild right now. I intend to do most of the "doable" jobs myself. Pulling an engine can't be that hard, can it?
×
×
  • Create New...