Jump to content
SAU Community

Recommended Posts

Recently, i found that my clutch goes from soft and comfy to suddenly very stiff, it is a very shocking transition, but after pumping a few times, it goes back to soft again.

And occasionally, (more like daily now), when the weather gets pretty hot, i sometimes hear a squeal when depressing the clutch pedal, seems like its coming from the pedal, but then sometimes it seems like its coming from elsewhere, like the squeal only starts when the pedal is fully depressed. It sounds like opening a door with unoiled hinges (i'm hoping that's what it is, unoil pivot ball).

So, i think i've narrowed down to these 3 probable issues.

1. Air bubbles in the system

2. Master Cylinder is kaput (well it was $30)

3. pivot ball needs oiling, or destroyed (gearbox out) =(

How now brown cow? Does somebody want to come drive the car for a bit and tell me the issue? =D

It didn't start till the day of my first paper, on the way to my exams, the clutch suddenly became hard, and then lasted that way till i arrived and parked, no leaking fluid, but the reservoir was low. When i finished the paper, clutch was fine again.

Clutch is an OS giken twin plate,

everything else is stock.

I previously had no pressure in my clutch pedal and had to drive around by turning off the engine, putting it into gear1, then starting the engine to move off, rev matching to change gears. The issue was fixed by changing the vac booster, so if anyone is facing the same prob, try it.

There you go, hope i can have an idea what the issue is with the silly car, and then come back and stamp out all those gremlins.

Link to comment
https://www.sau.com.au/forums/topic/345062-clutch-issue/
Share on other sites

Recently, i found that my clutch goes from soft and comfy to suddenly very stiff, it is a very shocking transition, but after pumping a few times, it goes back to soft again.

And occasionally, (more like daily now), when the weather gets pretty hot, i sometimes hear a squeal when depressing the clutch pedal, seems like its coming from the pedal, but then sometimes it seems like its coming from elsewhere, like the squeal only starts when the pedal is fully depressed. It sounds like opening a door with unoiled hinges (i'm hoping that's what it is, unoil pivot ball).

So, i think i've narrowed down to these 3 probable issues.

1. Air bubbles in the system

2. Master Cylinder is kaput (well it was $30)

3. pivot ball needs oiling, or destroyed (gearbox out) =(

My first guess would be leak somewhere in the clutch booster system (its looks and works like a brake booster, but smaller)

Link to comment
https://www.sau.com.au/forums/topic/345062-clutch-issue/#findComment-5560516
Share on other sites

My first guess would be leak somewhere in the clutch booster system (its looks and works like a brake booster, but smaller)

hmm, where is that booster thingy you talk about?

are you talking about the vac booster? next to the master cylinder? that thing is huge though...

Link to comment
https://www.sau.com.au/forums/topic/345062-clutch-issue/#findComment-5560783
Share on other sites

Its a lot smaller than the brake booster, lower down and closer to the transmission tunnel - IIRC its probably about 10cms in diameter and yeah it will have the clutch cylinder attached in much the same way as the brake master is attached to the brake booster. Check the vacuum pipe going to it for leaks.

If what i've said doesnt match up with what you see let me know and i'll go and have another look - the above is all from memory, and i have a crap memory...

Link to comment
https://www.sau.com.au/forums/topic/345062-clutch-issue/#findComment-5561462
Share on other sites

Its a lot smaller than the brake booster, lower down and closer to the transmission tunnel - IIRC its probably about 10cms in diameter and yeah it will have the clutch cylinder attached in much the same way as the brake master is attached to the brake booster. Check the vacuum pipe going to it for leaks.

If what i've said doesnt match up with what you see let me know and i'll go and have another look - the above is all from memory, and i have a crap memory...

oh well, car is driveable, will visit the mechanic when i'm back in feb then..

too much headache to self diagnose...

Link to comment
https://www.sau.com.au/forums/topic/345062-clutch-issue/#findComment-5561582
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...