Jump to content
SAU Community

Recommended Posts

dunno if its mentioned, what oil pump u running?

also what fuel?

and what size is the garrett equivalent?

Motor and oil pump are stock...

Fuel is a mix of 50% Sucrogen E85 and 50% BP98

Garrett 3076R is a tad smaller on both sides but the closest you will get :)

  • 2 weeks later...
  • 2 weeks later...

"CURRENT R32 Gts-t 410rwkw CLICK HERE FOR THE BUILD THREAD! "

So wheres the 410rwkw update? LOL

Few tweaks in tune/boost and turning on SAE correction it made

2011-02-03205959.jpg

Same tune on a dyno dynamics in shootout mode 359rwkw

SimonR32.jpg

Shows the difference different dynos can read :)

Hopefully down the black strip dyno soon to show some decent mph

Keen to see it run down the quater Simon, how often does she get driven & where do you source your e85 through?

Usually don't drive it heaps because I have a work vehicle, maybe a few times a week! Mates R34 with similar mods but 50hp less ran 11.5 @ 128mph about a month ago so fingers crossed it goes ok :)

Got the E85 from RPW in 205L barrel

Usually don't drive it heaps because I have a work vehicle, maybe a few times a week! Mates R34 with similar mods but 50hp less ran 11.5 @ 128mph about a month ago so fingers crossed it goes ok :)

Got the E85 from RPW in 205L barrel

Im guessing it was that white r34 at whoop ass a few weeks back. What boost are you running now with your power increase? 410kw is some awsome power out of a stock 25 :)

Im guessing it was that white r34 at whoop ass a few weeks back. What boost are you running now with your power increase? 410kw is some awsome power out of a stock 25 :)

Yeah that's the one :)

Boost is around 1.8bar dropping down to 1.5bar... I think the turbo is giving all it can give!

im so considering getting a smaller kando turbo for my rb20!

haha

but i'm also kind of scared ;P

Go a TD06SL2 20g on the RB20... It will fly!

what size is the exhaust off the turbo?? 3" or 2.5" im doing a setup with one of these turbos, wondering is my 2.5" dump with a few mods will be anygood, or should i just get a new one made

It's a 3" v-band off the back of the turbo so you want it at least 3"

cheers, looks like a new dump it is then, question is now, do i get it welded in 1 piece with the front pipe, or make it seperate.. my front pipe is 2 1/2" flange but 3" it has a reducer.. probably better to chop is off and weld 3" to 3" :D bit of a waste, i just bought a new flange to stuit it. oh well, thats what happens when u change ur setup :D

f**k it! i'm gonna order a TD06 :D!!

should be bolt straight on if it has a t25 flange!! :)

agreed i run a td06 and my little rb20 hammers

also great build thread car looks great not to overdone and very straight.

Edited by Yts

agreed i run a td06 and my little rb20 hammers

also great build thread car looks great not to overdone and very straight.

:O!?

few questions :P

was it very simple to setup?

was there any problems setting everything up

what model did you order?

and was there any after costs?

:O!?

few questions :P

was it very simple to setup?

was there any problems setting everything up

what model did you order?

and was there any after costs?

sent you a pm, back to the awsome build thread, how bout posting some more footage of it?? or even on the dyno?? and have u got any more future plans

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If doing that ^, I'd take the idle up valve out and plug the hole in the pump.
    • You can try capping the power steering idle up valve at both ends if it's old. The valve and the intake manifold. That is something that is known to fail in Toyotas with age and it will suck power steering fluid into the intake and burn it in the engine which can cause issues. Then bleed it again with engine off first. Do like 30+ lock to lock turns with the front wheels off the ground.
    • Hi Brent, I am wondering if you ever worked this out? I have upgraded this unit to a newer one and everything works bar the reverse camera, so i really want to know what plugs are what so I can patch the camera through. many thanks in advance Mike
    • Once you have to get up in the morning and be useful, you suddenly value sleep it turns out :p
    • Update:   smoke test all pipes no issues cleaned reservoir   fluid put in ( dexron 3 atf)   steering turn side to side and could hearing  gurgling from steering rack which I assumed was air lock, opened one of the steering rack connections and could see loads of air getting pushed out( not sure if you meant to do that / whether it will re introduce air into system)   anyways, loads of side to side sound was gone. Turned car on, pump was slightly ( barely) wining so turned side to side few more turns and fluid level when car on was almost none in resorvoir which I guess is normal if car is one. Turned car of and fluid was gushing out. Almost 200-300cc was pushed out. Repeated engine off side to side followed  by engine on and same result       going mad now. It seems system is either sucking air in whilst on or there is tons of air which I am not giving it enough time to bleed. Thoughts?   would it work like brake caliper if I open steering rack copper pipes and let gravity pull all air out?   or maybe have a restriction somewhere? What is the red circled item, could that be blocked? It i
×
×
  • Create New...