Jump to content
SAU Community

Another R32 Money Pit

SimonR32
 Share

Recommended Posts

  • 3 weeks later...
  • Replies 257
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

SimonR32
SimonR32

First off back in 2003/2004 I imported my first Gts-t... Was a great little fun car with a RB20 and Apexi turbo making 220 odd rwkw http://www.youtube.com/watch?v=lp2QUSzZFa0?fs=1&amp http://www

SimonR32 Grand Master

SimonR32

Posted
  • Author
Posted

So Sard 700s and Nismo in tank should be ok for a 50% mix?

Can't see why not, I do have a sard reg as well but it's set at standard pressure so doing exactly the same thing as a stocker :)

Bris guys are making 370-380 killerwasps on straight E85 on RB26s using 700's you "should" be fine with the little 2L and that pump.

Yeah, it's only people like Elite Racing that seem to have issues with injectors/pumps not flowing. I have a feeling it might be the tradie and not the tool in that case haha

The Dan Grand Master

The Dan

Posted
Posted

Can't see why not, I do have a sard reg as well but it's set at standard pressure so doing exactly the same thing as a stocker :)

Yeah, it's only people like Elite Racing that seem to have issues with injectors/pumps not flowing. I have a feeling it might be the tradie and not the tool in that case haha

Hey thanks for the plug.

BTW, when I called you out on it via PM, you never got back to me with those figures? You might wanna back up your mouth with some facts before you get into an argument you can't win

SimonR32 Grand Master

SimonR32

Posted
  • Author
Posted (edited)

Hey thanks for the plug.

BTW, when I called you out on it via PM, you never got back to me with those figures? You might wanna back up your mouth with some facts before you get into an argument you can't win

I guess it was a bit of a plug, mind you I always thought that being infamous was not all it's cracked up to be.

I gave up getting back to you with evidence after you said the dyno figures were inflated, the mph of the trap speeds were fake and just generally everything that I showed you was impossible!

But hey, I have every reason to lie about it...

...wait actually I don't!

Edited by SimonR32
The Dan Grand Master

The Dan

Posted
Posted

why on earth would anyone go to the trouble of making a fake 1/4 slip

That's the point, he never showed me anything,

He's real good at running around like a school kid dropping smart ass comments but when you call him out on it he backs out and runs away.

You never answered any of the questions I asked you on injector size or open time and did nothing but comment on how many dynos read the same figure.

I told you before, until you have PROOF of your claims, then don't make comment on advice I give or information I provide.

  • 2 weeks later...
SimonR32 Grand Master

SimonR32

Posted
  • Author
Posted (edited)

Another update, have not driven the old girl for a fair while now because I decided to get some decent coilovers to replace the mismatched pairs...

Was going to get a set of BCs but ended up with a Set of Greddy Type S. They are a lot better than the old set as they are base adjustable, damper adjustable and also have tapered rear springs!

2011-05-11173313.jpg

Busy setting the ride heights at the moment (did rears last night) and have had a few quick test drives on them and they feel and handle a lot better so I'm very happy :)

Also tried to install the JJR castor rod brace but it fouls on the front standard swaybar. I'm assuming it's because of the amount of front castor and camber I run, has anyone else had this issue before?

jjrchassisbrace.jpg

Edited by SimonR32
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      NC MX5

      By GTSBoy · Posted

      Nope, but they are definitely one of the default choices. Well established.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Has anyone used > https://performancecoating.com.au/  
    • Ozdavroz
      R32 owner from ACT

      By Ozdavroz · Posted

      Haha actually I did join back then under a different email address,  I couldn't re-activate my account so made a new one! I didn't post much anyway so not missing out on much. Amazing to see how the value of the cars and parts has changed over the years, also ACT section appears to be dead now. 
    • Ozdavroz
      R32 owner from ACT

      By Ozdavroz · Posted

      Thanks... It's in pretty good condition overall, probably due to not being drifted/tuned however being a daily driver has taken its toll. Had 100k on the clock when I got it, up to 180k now. Unfortunately it's not 100% dent free, it's got a small dent on FLH side and broken indicator from where I hit a small kangaroo at high speed. If you look at closely at pic #5 you might spot the dodgy trailer light repair my old man and I rigged up as temporary repair! - It's still there due to a combo of needing the car as daily driver and then too lazy/busy to fix properly. I've a couple of other minor accidents accidents as well but nothing major. One required a new front bar and unfortunately the smash repairer ordered the normal gtst one and not the aero bar. Needed the car back asap so just went with it, regretted ever since.
    • GTSBoy
      How "plug and play" is the Haltech Pro for R33 GTST

      By GTSBoy · Posted

      I can't believe that anyone is foolish enough to believe that the base maps are for any other purpose than to drive the car up onto the trailer/truck or gently creep it to the dyno. No matter how good they are, they can never be any better than the factory maps**, and only the foolish trust those on a significantly modified setup. **Yeah, yeah. I know there's also the difference between factory maps being fixed to certain injector sizes and MAP/AFM/VE relationships, and the likely aftermarket ECU base maps being better able to handle the sorts of changes that would render a stock ECU dangerous, like different sized injectors. But let's just ignore that for the moment, because the principle is still the same.  
×
×
  • Create New...