Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • 4 weeks later...
  • 1 month later...
  • 1 month later...

Help me clean out my shed!

Still up for sale are the following items:

Parts from a R33 GTR:

2) Front Swaybar with links $20

4) Rear Camber arms $20

5) Castor arms with Nolethane adjustable centres - $50

7) Plastic Recirculation pipe that goes under the radiator - $50

10) Oval muffler 3"in, 3" out. Straight through, dent on one side, $30

12) "drift" gearknob, silver carbon pattern - $30

14) 2 x 275/35/R18 Toyo R888 - bald - good for track days (0.5 seconds faster around Malalla apparently?) or burnouts? $25 - pick up only

15) Factory Lower intercooler rubber hoses $50 for both

16) Hicas Rack, with tie rods - was working fine - $45

All parts located in Hope Valley SA 5090

Can organise freight at buyer's cost

Cheers,

Nigel

hey mate keen for the 33 gtrr castor arms and the banged up muffler.

Pm me with your location and contact details and we can work something out

cheers,

robbie

Hi mate,

Is your standard airbox + snorkel still available? and if so is it modified at all?

Sorry the pics for the airbox don't work.

Cheers

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • From the pictures I have when doing the job the flywheel is the same diameter, I don't think they're playing weird tricks like putting weights at the outer diameter to increase flywheel inertia or anything like that. The OEM flywheel is definitely heavier, but it's not a huge difference. Quoted weight savings of the clutch is 2 kg so I can't imagine the flywheel being lighter than ~7 kg. Kind of regret not weighing it before the clutch went into the car but as far as driveability goes I have no complaints.
    • HKS trigger kit should be very easy to integrate with a Link. It's a 36-2 crank trigger. Hard part is finding the motivation to take off the timing belt and everything on the front of the engine to install it. You also need to cut out a hole in the oil pump housing so the sensor can read the trigger wheel. Changing out the cam sensor for a 24 tooth setup is probably good enough but as others have mentioned depending on what underlying assumptions are changed it becomes more of a problem. Reading the crank state off of the cam is an abstraction that works in the general case, but if you have an edge case it makes less and less sense. There is a GTX2860 gen 2 that can take a compact 5 bolt housing so it's direct bolt on but I'm not 100% sure of what's involved. Peak compressor efficiency drops off a bit on these turbos vs -5s, 77% vs 73% but you get way, way wider region of operation. The -5s have a really strange surge line in their compressor map that is all over the place. If you think the hot side on the -5s aren't open enough you can try the Tomei T550B turbos which a local tuner seems to be happy with:
    • i need a complete tail light for my R33 GTR if you have please let me know.
    • I need a great maintenance workshop around Idaho, if you know one please let me know..
    • Hello friends, i have a good friend in Canada that looking for a good condition 1993 GTR around him please if one or know someone around you that is willing to let it go please let me know so that i can inform him.....Thanks
×
×
  • Create New...