Jump to content
SAU Community

Gps + Vdeo In Motion Solution

Leev_35

By Leev_35,
in V Series (V35, V36, V37 & Infiniti)

 Share

Recommended Posts

Leev_35 Contributor

Leev_35

Posted
Posted (edited)

Hi All,

I have recently done a DIY job to get my Video in Motion going. Using tips from another post I pulled apart the TV tuner and soldered a wire to the C1 circuit on the TV card, I also grounded a wire to the Ground on the circuit board and ran them to the front of the car where I installed a simple $2 switch, when the switch is on, nothing else will display on the screen (apart from whats plugged into the Aux port), when its off the screen acts normally i.e. will only show movies/TV etc when the footbrake is on and you can access all of the inbuilt systems (fuel economy etc).

I previously installed the RCA cable harness provided by Chris Rogers and have an ipod lead popping out of the centre console.

I have a jailbroken iphone 4 running a free App called TVOut2 which basically transmits in real time any image on the iPhone screen to any other screen, TV etc. I also have a purchased Navigon GPS app running on the iPhone.

The TVout program allows you to set which programs operate on portrait or landscape and it also allows you to stretch or shrink the image if need be.

The nav programs drops the music or video volume slightly to give verbal street name directions etc.

You can of course also view any other items on the iphone - internet, youtube, games - whatever you want.

So what I have now is a realtively cheap Navigation system which displays on the stock screen whilst simulatneously being able to play music and videos (when the car is stopped of course :-).

I used the nav system on an iPhone 3g but the GPS was very poor, the iPhone 4 hasnt faltered once.

Just sharing this cheap mod.

If anyone wants more details let me know.

Cheers

Lee

Edited by Leev_35
Link to comment
https://www.sau.com.au/forums/topic/345217-gps-vdeo-in-motion-solution/
Share on other sites
Leev_35 Contributor

Leev_35

Posted
  • Author
Posted
http://www.skylinesaustralia.com/forums/in...t&p=4643222

Here is a photo of the tv tuner board from another post it tells you how to do the above

Hi Guys,

Yes this is the post I used to install the switch from the TV Card. Please note my card was completely different and the point on the card which I soldered the switch to was labelled C1 not Cont1 as in this post.

Also the Ground on my TV card was a screw in the centre of the TV card which was easy to attach the ground wire to.

It was difficult to solder the switch wire onto the C1 point, probably because a. I am useless at soldering and b. because the guage of wire I bought was too thick.

Also I nee to point out when you start the car you need to turn the switch off and then press the TV button then turn the switch on again. If you dont you get the image but no sound.

I am loving this mod though and I find the GPS on the iPhone better than my Tom Tom plus the Mrs. loves watching movies whilst I concentrate on the road.

Cheers

Lee

Leev_35 Contributor

Leev_35

Posted
  • Author
Posted
just quick q, how long did it take you to set it all up?

Hi Mate,

Well I already had the Aux cable from Chris and the iPhone RCA cable.

About 20 minutes to pull apart the TV box and solder the wires.

Already had the iPhone Jailbroken and necessary App installed.

With the fiddling to put everything back together and run the cables maybe an hour and a half all up. Apart from Chris Rogers Aux cable all other materials cost me about $5.

Cheers

Lee

Ozeraser Explorer

Ozeraser

Posted
Posted
Thanks mate. Got the Apps you mentioned and tried it in the V36. It works but screen is black n white, and it could be sharper.

Definitely a cheap option.

Black and white is because your in PAL mode change to NTSC

Leev_35 Contributor

Leev_35

Posted
  • Author
Posted
Black and white is because your in PAL mode change to NTSC

Hi there,

It would definatlely be the NTSC/PAL issue. In options under ipod there is a video out setting, just change this.

I did the same thing initially and thought my screen was shot.

The picture I get now is very crisp dependant on the actual resolution of the source image.

Cheers

Lee

scarf Proficient

scarf

Posted
Posted
Hi there,

It would definatlely be the NTSC/PAL issue. In options under ipod there is a video out setting, just change this.

I did the same thing initially and thought my screen was shot.

The picture I get now is very crisp dependant on the actual resolution of the source image.

Cheers

Lee

Seriuosly where would I be without you guys :rofl2: Thanks!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • niZmO_Man
      forum.r31skylineclub.com down or gone?

      By niZmO_Man 路 Posted

      We will review wtf is going on, but if you made any donations let me know and i will follow it up with the admins
    • MBS206
      Pillar gauges

      By MBS206 路 Posted

      See, that button sounds like perfection Duncan! My eyes really don't like light shining at them from a dash when I'm driving. Being part red colourblind, I've found for most cars that I can change colours on, I set everything to red, so my eyes see the elast amount of colour! I miss normal gauges in cars
    • niZmO_Man
      R33 rear seatbelts

      By niZmO_Man 路 Posted

      bro, knowing the Japanese in  the 90's, i wouldn't be surprised if they shared components across their model lineup.
    • Kapr
      Possible swap on R34 RB20DE NEO?

      By Kapr 路 Posted

      Maaaan so many "little" things  i rly hope my old RB20 would be "ok" and not too bad. I try to learn what and what not do i need. I look at crossmember at it looks different...even parts numbers are different. Wiring and all that i rly do not know...yeah someone mentioned the speedo thing. On that yoke clip. I rly do not know what can and cant be done "custom" so that is why iam asking to know and not be suprised 馃檪  I know what it looks like  
    • GTSBoy
      Possible swap on R34 RB20DE NEO?

      By GTSBoy 路 Posted

      Oh, there's also the gearbox crossmember which will probably be different between the small box and the big box, and the wiring loom will probably need to be modified, because the plugs for the switches etc, will probably be different. And I think the speedo on the small box R34s is from somwhere stupid, like the diff, possibly, so you'd need to work out what needs to be done about that (assuming it is different). I think the thing you need to realise is that the front end of that yoke is a large hollow tube with splines on the inside that mates with the splines on the box's output shaft. It is a dedicated thing - not available "aftermarket". They were made to suit that box, by the car's OEM.
脳
脳
  • Create New...