Anyone Know A Automotive Welder In The Sth.east Burbs?

[Gazzilla]

Due to the lack of replies on another sub-forums. thought id move it here...

So I got dicked by COnstable f**kwit Pettet a couple of weeks ago. anyhoo I have to remove the Intercooler and get stock one back on, as Aftermarket one has a pipe which runs through the chassis rail of the car, which is not cool. So I had a VASS engineer come to my joint and inspect the vehicle. He says I'll have to remove extension cross over pipe from the hole, and get a Welder to patch it with a plate using a chain weld style. Absolute f**k around and a half.

Does anyone know anyone who can do this In Melb sth.East?

cheers.

[Count Grantleyish]

Panel beaters should be able to do it.

Friend of mine told me not long ago, just put a piece of alloy and sikaflex over the hole.

If you need panel beater to do it, go to DT Panels in Springvale.

[Gazzilla]

thnks brah, wills check them out.

[Birds]

Whilst the alloy might full the popo, an engineer is probably going to want it done properly before certifying it...then once you are done, get a return flow cooler

[Count Grantleyish]

Whilst the alloy might full the popo, an engineer is probably going to want it done properly before certifying it...then once you are done, get a return flow cooler

This.

[Power Glide GTR]

putting a plate over it wont pass and who said u need an engineers to pass it.

just go get the hole welded up if u dont need an engineers just get roadwothy through a mate

[R31Nismoid]

he was defected. it will be listed on the notice he has to get a VASS.