Oil Catch Can/pcv Setups...

[R31 POWER]

Abdul11 i got mine from bunnings. Make sure they are stainless steel!

[AMR33]

Cheers Jase. So its a matter of just putting it in the can? Does it matter where it is positioned etc?

Cheers

Amir

[AMR33]

Hey guys

I am buying a CC (greddy style/D1 etc - the square shaped ones) and I want to mount it like Hamish did

(http://www.sau.com.au/forums/topic/129549-oil-catch-can-mounting-and-roughting/page-2?hl=+oil). I will baffle it by putting stainless steel inside. I have 2 questions

1. does it matter where the stainless steel wool/stuff is placed inside the CC?

2. does the hose from the rocker cover have to go to a specific port/hose barb etc on the CC?

Thanks in advance guys

Amir

http://www.sau.com.au/forums/topic/129549-oil-catch-can-mounting-and-roughting/page-2?hl=+oil

[Hypr33]

I have a catch can setup two cam cover hoses straight to catch can and the return back to original return on the turbo inlet. I have notice that i have have massive amount of condensation in my catch can clear water type that has a strong e85 smell i don't have any trace of water in my oil when checking the dip stick and noting to instigate that i have a gasket bypass issue Is this normal or do i need to get it checked out ?

[BoostdR]

Normal with e85, warm up tune can make a noticeable difference though. You want to get it in closed loop asap after cold start.

Matt

[Hypr33]

Normal with e85, warm up tune can make a noticeable difference though. You want to get it in closed loop asap after cold start.

Matt

Hi Matt

Anyone you can recommend that i can go to that can do this tune? not sure if i can do it on mine as i am running a Nistune ECU

Anton

[KiwiRS4T]

Hi Matt

Anyone you can recommend that i can go to that can do this tune? not sure if i can do it on mine as i am running a Nistune ECU

Anton

You need to post up your location in your profile if you want a tuner that is not thousands of miles away.

[Hypr33]

You need to post up your location in your profile if you want a tuner that is not thousands of miles away.

Made the change i am in Adelaide AU

[BoostdR]

I can do it, PM me

[mayor quimby]

Running a single turbo on a rb26dett, anyone ever vented the crankcase through the rear turbo oil return. I was thinking about tying it together with the rocker cover breather hoses and then to a catch can and either going to atmosphere or running a hose back to the intake. to create some vacuum in the crankcase. What do you guys think? I'm just wondering if i'd be sucking oil up instead of just pressure.

[KiwiRS4T]

Don't do it. You don't want to interfere with the turbo oil drain. And you want your crankcase/sump breather on the other side of the motor.

[grapejuice]

Did my catch can install this weekend, this thread was the most useful for me since I wanted to keep my pcv. Came out really good and runs very good so far!

[jiri styles]

[WantGTR]

Did my catch can install this weekend, this thread was the most useful for me since I wanted to keep my pcv. Came out really good and runs very good so far!

What catch can is that bud?

[KiwiRS4T]

What catch can is that bud?

Looks like a custom job. Lot of people get a unit made up to include the catch can and washer reservoir.

[grapejuice]

What catch can is that bud?

It's a custom one from Japan, got it from the guy I imported my car through. It is internally baffled too which is nice.

[sneakey pete]

Exactly what I'm going to do for mine, except i'll have a vent to sump

[R32GOJIRA]

Does anyone have any drawings or illustrations of what sort of baffling should be inside the catch can for a track setup?

Is it extensive?

A picture would be nice.

[KiwiRS4T]

Strangely enough Google has heaps. Just Google "baffled catch can design"

[R32GOJIRA]

Just now, KiwiRS4T said:

Stangely enough Google has heaps. Just Google "baffled catch can design"

I figured i would ask here, as being a GTR owner, getting real world GTR examples that work would be a start