Jump to content
SAU Community

Recommended Posts

depends on how much install your talking about, a basic one. not worth it. show car crazy yes , but it must comply with common sense, not block off the windows etc. and remember if you paint up the fibreglass fancy, it reflects off the rear window so bad you can't see behind you ??? and not cut metal in the car safety areas. pretty much any of it !! and the steel plate in a GTT behind the seat must stay bolted in and intacted or the chassic flexes a lot in the rear ?

remember to ditch your backseat you need to remove seatbelts/baby bolts, weld the holes up, and re rego the car as a "TWO" seat car to comply with road safety rules? or you can get defected ?

IMO.....really not worth it , but then the back seat is pointless unless you have no legs, or want a to haul a extra chick around..lol my seat is so far back you can't even sit a child seat behind it !! the rear seat is pretty light weight so no real gains on that count.

if you don't plan a pro install then DO NOT DO IT!!! a big wooden box/sub chucked in the back is a death missle when you hit the brakes ?? they can and will pull a metal bracket right off in a high G impact or stop.

Edited by sapphiregraphics

Thanks for the advice. I wasn't thinking along the lines of show car crazy or a wooden box in the back seat, somewhere in between. Didn't realise you had to wield up seat belt holes though or that the steel plate behind the rear seat actually did anything useful.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Lucky pick up Best to find these things before something horrible happened to the yoke flange thingies I would hate to think what would happen if it dropped the tailshaft  Hopefully the holes are not flogged out in the yokes and it was just the bolts that got munted  As for the hand brake.....ouch, look like the disc got rather hot, and I assume smokey, I recall when I had a front caliper seize on the Commodore, there was lots of smoke and the disc was glowing cherry red when I was able to eventually stop and have a look, and stopping a big heavy car, going down a big hill with some rather high RPM down shifts and some hand brake action is something that makes you think hard about life
    • One of the things that never seemed right was the handbrake. Put in some nice new Project Mu shoes. We figured the rears were out, so why not. We're right there. My handbrake never worked well anyway. Well, this is them, 15km later. 67fdcf94-9763-4522-97a4-8f04b2ad0826.mp4 Keen eyes would note the difference in this picture too:   And this picture: Also, this was my Tailshaft bolts: 4ad3c7dd-51d0-4577-8e72-ba8bc82f6e87.mp4 It turns out my suspicions that one side of the handbrake cable was stretched all along were pretty accurate, as was my intuition that I didn't want to drop the tailshaft to swap them on jack stands and wasn't entirely sure about bolt torque. I have since bought the handbrake cables which have gone in. I'm very glad that I went to my mechanic friend who owns an alignment machine to get an alignment before the track day, because his eyes spotted these various levels of "WHAT THE f**k IS GOING ON HERE?". Turns out the alignment wasn't that bad, considering we changed the adjustable castor arms out for un-adjustable castor arms, and messed with the heights. Car drove pretty good with one side of the handbrake stuck on, unbleedable rear brakes, alignment screwy, and the tailshaft about to go flying and generally being a death trap waiting to happen! (I did have covid) (I maintain I adjusted the handbrake correctly, but movement caused shennanigans and/or I dislodged the spring on the problem side somewhat, or god knows what). G R E G G E D
    • Very interesting, im not sure how all those complications fit in to running a haltech instead of a stock ecu but I'm starting to think I'm a bit out of my league.
    • I just put 2 and 2 together. This is a Neo converted R32. The Neo ECU (in concert with the R34's AC controller) runs the AC quite differently to how the R32 ECU and AC controller do it. If you just drop it all in, it won't work. There is some tricky wiring required, including changing to the pressure switch that the Neo controllers want to see. I don't know what it is, because mine was done by a guru. It was a year or so after I did that transplant before he worked out what needed to be done.
    • Don't assume the AC relay signal from the ECU is +, some models including Stagea use an earth trigger.
×
×
  • Create New...