Jump to content
SAU Community

Recommended Posts

Hi Gang,

Cant find any recent threads on this topic so I wanted to see if anyone here has any ideas on NSW race and Rally rego.

The RTA website doesn't make any mention on race cars (http://www.rta.nsw.gov.au/registration/conditional_registration.html) and CAMS website isnt helping me much. Basically in a few Google searches I am seeing that the RTA changed the rules mid this year and people seem to think you cant do it anymore.

Does anyone have any information on how I could register a unregistered (non-import, expired rego) car with race and rally rego?

Link to comment
https://www.sau.com.au/forums/topic/345708-nsw-race-and-rally-registration/
Share on other sites

There is a big thread on it in the NSW members section, basically you need to be entering dirt rally stuff because Targa etc is run under AASA so CAMS isnt interested in race/rally rego unless they are dirt cars.

Hi n00b.

My car is still under the old rally rego, but that scheme was shut to new cars because every dodgy f**ker imported cars then registered cars under it without compliance.

The current scheme will only allow cars which are compete in dirt rally events, and you can be sure that the CAMS rally guys will not allow it to be extended to cover any other car in case they lose access to it again. I am talking with CAMS state manager to represent the tarmac rally/club racer with an import group arguing we should be allowed back on the scheme....but expect it to be a long process.

In other words....no chance in the near future.

BTW, the conditions on my rego are:

Used to get to or from CAMS events (ie not AASA)

Used to get to or from mechanic for mechanical work

Used to get to or from practice.

I use 2 and 3 a lot. I call AASA events practice for CAMS events. Phone call required to the CAMS rally rego number every day it is used, about $4 each day in phone charges. Rego is under $100 including greenslip. No pink slip, just owner certification of roadworthiness

  • 10 years later...
  • 1 month later...
  • 1 month later...

If you know the right people it's not overly hard for race & rally rego. There's a few EVO's with it in NSW.

Might be better off on the NSW CVS scheme which your local lovely club *coughs* us can now offer. As long as you can pass a blue slip she should be good to go.

The current system is more painful than the previous one but still possible, I've got it on my GTR but these days you need an annual inspection by one of very few inspectors.

Historical/Club rego is a much better choice if you qualify

  • Like 1
On 02/11/2021 at 7:06 PM, Duncan said:

The current system is more painful than the previous one but still possible, I've got it on my GTR but these days you need an annual inspection by one of very few inspectors.

Historical/Club rego is a much better choice if you qualify

*coughs* SAU NSW CSV rego 😄

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sell it and buy something newer? 😛
    • Better then PooPooG... or is it PeePeeG? 
    • The steering wheel on my 97 s3 gtr is a little bit worn out, so im on the hunt for something mint. I notice that this type of steering wheel is on several other nissan's of the era.  Does anyone know if their all identical, or are there slight differences? I feel like gtr tax applies to anyone selling one, but if it comes from any other car the price is much less, even though its the same design.  Chat gpt says the material for the gtr is slightly different and it says gtr on the wheel, but every pic ive seen it just says nissan. 
    • I might have to say it.
    • Ahh... it's an early RE5R01A box, that means the pinouts I gave are wrong (they were for the RE4R01A 4-speed box)... I'll have to dig around in my docs to see if I've got that schematic (they used the same gearbox plug, with the vacant pin wired to the direct drive clutch solenoid)...prolly hidden away in a supplement somewhere... ...there were 3 variants of the RE5R01A ~ this early schema was what we called the 'dumb' 5 speed ; it's what jatco called a 'medium duty' box, with torque holding up roughly ~200ft/lbs or so, which was good for NA from RB20/25DE and up to around VG30 output spec. With the RB25DET (and VG33/35 mills), the only options they had was the 4-speed 4AX00 box, which had been beefed up to handle the extra torque (primarily for the VG35, but it also suited the RB25DET mill and others)...and the RE4R03 box in large 4WDs a lot of the time... ...the next variant of 5-speed was redesigned, stronger, and 'smart'...first ones had external TCU with internal (on valvebody) Shift Control Unit, pressure switches, and 2 x TSS...and the last ones had internal TCU+SCU setup, with CANbus control etc etc. @DRoc81 On the RHS of the box towards the rear, there should be a stamped silver ID tag -- what's the model number? Oh...and with the early 5-speeds, the torque converter control solenoid assembly should be replaced as well (31940-60X00)...it's a bit Murphy's Law ....if one has failed, bet on the rest not being far behind ...
×
×
  • Create New...