Jump to content
SAU Community

Rb20/25 Clutch And Billet Flywheel

45ULT
 Share

Recommended Posts

45ULT Rising Star

45ULT

Posted
Posted

selling my clutch set up off my r32. I have an Extreme Clutches cushioned button clutch kit which has held 400hp without a problem, the clutch has a fair bit of meat left on it and is very easy to drive normally but has the bite for when u need it.

Billet flywheel- suits factory replacement clutches and is very light compared to a standard flywheel. could do with a machine which would be an extra $40 or so which i could organise at the cost of the buyer.

chasing $350 ono for kit or willing to separate the flywheel from clutch kit for the right price. Pm me or txt me on 0433 960 414 for a faster response

post-22968-1290936611_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/345838-rb2025-clutch-and-billet-flywheel/
Share on other sites
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      How "plug and play" is the Haltech Pro for R33 GTST

      By joshuaho96 · Posted

      1. Factory knock sensors for now, honestly the RB26 OEM knock sensors seem ok as they're flat response instead of resonant type but they appear to be internally grounded to the block. If I do replace the sensor it would just be to get ones that are not internally grounded so a differential input can be used to reject common mode noise. Definitely plan on fixing this as a part of the tuning process. 2. Never deliberately induced knock, though I guess I could try that experiment if I really wanted to. 3. All of this is basically on a stock engine + ECU, only modification is HKS GTIII-SS turbos and a Nismo plenum. Currently I run it with the wastegate solenoid unplugged so it won't try to raise boost past wastegate pressure.
    • niZmO_Man
      CoD:BO6

      By niZmO_Man · Posted

      After being peer-pressured into paying $100 for the MW remakes, got BO6 on XBox Game Pass. I think that's worth it.
    • niZmO_Man
      I for one welcome Nissda.

      By niZmO_Man · Posted

      HoMoArt!
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      That's a given!  Bit hard to powdercoat it properly without removing them! 😁
    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      No detail on compressor or turbine sizes, which doesn't help with housing size selection with that kit. However, from SR20DET mucking about and money torching perspective, a GTX2860R Gen 2 w/ 0.64 (46mm inducer) will do ~260kW on E85 about 1.5bar of boost. All in before 3000pm, which cause a gearbox to shatter. Now imagine the same turbo, on a modern motor with an extra 0.5L of displacement, and heaps of cam timing adjustability (not an on/off affair like the Nissan shit boxes). If this was my car (which I would never own or consider buying, ever!), I would go for a nice twin scroll setup, and a G30-660. Gates plumbed back, no silly shit. Lean on the cam timing, big displacement to create a flat-ish torque curve.  
×
×
  • Create New...