Jump to content
SAU Community

Recommended Posts

Hey guys,

Well I have been very happy with my rb30dett so far and I love it.

Problem I have is that 5th gear seems to run out of legs. Would this be caused by the diff ratio mismatch now? I am considering a 6spd getrag conversion, but maybe I can go to a 3.7 diff instead to resolve this? Not too mention it's cheaper.

Just seems like it wants that 6th gear now when your at the end of 5th.

Thoughts? Remember your talking to a diff/gearbox ratio n00b here. :whistling:

If you are running this in a GTR I do not think you will find a 3.7s set in factory form. If it were RWD only you could get a crown and pinion from a 200sx.

The effect would be a 15% increase in gear length. 100kmh would become 115kmh at the same revs, so on and so forth. If you are topping out at 260 it will give you the ability to get very close to 300kmh.

However, last I remember R32 GTR's have stupendously long gears to begin with ? :whistling:

dude top of 5th gear is well over 260 km/h? where on earth are you topping out 5th gear? and what mismatch? you still presumably have the same diffs and same gearbox you did with the RB26? and the engine should pull about the same rpm? when you say running out of legs do you mean it's not pulling hard at the top of the rev range? if so it sounds like you've gone backwards?!

BTW, 3.7 with a 32 box would give you an astronomical top speed. around 320km/h and you'd never get there. the car would feel so lazy. first gear would get you to about 80km/h, about 130km in 2nd gear.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would again like too thank Matt for his help in me sourcing the detachable hard top for the little red car, without Matt's assistance in inspecting it and locking it down, I can guarantee it would have sold before I could get up to see it,  and as that was the only available NC hardtop in Australia, I consider myself extremely lucky on multiple levels To say I'm more that happy would be an understatement And, it is 100% water tight, I drove through torrential rain coming back south, and by torrential, they type of rain that doing 40kph in a 110kph zone was a real thing, and even then, the standing water on the Hwy was deep enough to throw waves I'm also more than happy that the huge "BEASTS" that Matt calls dogs didn't eat me for lunch, I'm sure the sniffs and licks were more to "taste test" me, over being to friendly Now to work out what colour to get it painted, panel match, or gloss black........first world problems are real
    • Actually I might have figured out. Looks like there is a tab according to google images but it's hidden. Silly me.
    • No clips on this one like the other connector. Only that red tab that I can push slightly up.
    • For any loom connector that has an obvious release that resists pushing far enough to unclip, just spray some silicone lube into it. You might also benefit from using a bent screwdriver or small pick to push in the right place at the right angle.
    • Hey all, I went to try and fix my indicator not canceling, but I couldn't remove the clockspring cable under the column so I could twist that green thin. Anyone know how to remove this cable? I see this red tab but didn't have any luck. I was thinking of unscrewing it but wasn't sure if it would cause issues. I did notice for my indicator stalk, 2 out of 3 cables were plugged in but the last cable wouldn't fit in the stalk. I'm getting it's for fog lights. It was like this when I originally pulled it off.  
×
×
  • Create New...