Jump to content
SAU Community

Recommended Posts

Hi guys,

After 5 years of ownership it's time to sell my beloved R33 GTR. I still enjoy driving the car immensely but it's time to move on... The vehicle is close to stock with the factory ECU, and performs healthily with the handling still very tight. Purchased in 2005 with about 45,000km showing and nothing to indicate mileage would be any higher. Now presents extremely well for its age - enthusiasts looking for a near-stock, well looked after example should appreciate as there are many others out there with supposedly half the mileage which are quite rough around the edges - 100K should be no deterrent for a car that has been lovingly cared for! :ph34r:

* 1996 model BCNR33 GT-R (non V-spec)

* 105,000km (has had 100,000km service incl. water pump, timing belt, bearings, etc)

* Service history

* Rego till May 2011

* S3 Xenon headlights + clear indicators front and side

* TEIN SS coilovers with height and damping adjustment

* TEIN EDFC (in-vehicle on-the-fly adjustment of front/rear damping force, with memory)

* Fujitsubo Legalis R cat-back exhaust

* Midori high-flow cat

* Original R33 GT-R 17"x9.5 alloys

* Almost brand-new Bridgestone Adrenalin RE-001 rubber.

* Immobiliser

Only ever used full synthetic oil (MOTUL or Elf) changed at 5,000km intervals. Car is completely straight with absolutely no rust or panel/chassis/underbody damage whatsoever. Paint has been treated to regular clay bar / polish and wax, and interior is immaculate (non-smoker car) with very little wear on steering wheel, carpets or driver's seat. Still smells like new. Mostly highway kms early on in my ownership, now she only gets the odd weekend drive; literally always garaged and hooked up to trickle charger.

GTR1-1.jpg

GTR5.jpg

GTR2-1.jpg

GTR3-1.jpg

GTR4.jpg

GTR6.jpg

Asking for $25,000 o.n.o. Happy to answer any questions about the car. Putting it up for SAU guys first, before it goes to CarSales.

Cheers,

Matt

Link to comment
https://www.sau.com.au/forums/topic/345997-fs-1996-nissan-bcnr33-gtr/
Share on other sites

ABSOLUTELY BEAUTIFUL. I don't think those words could explain how sweet that looks. Good luck with the sale. I'm really hoping to find 1 in the condition this is in, when I sell my 32 next year.

Last year, this car won an SnS "Best R33 GT-R" award signed by Skaifey didn't it? :D

Thanks Terry :)

this is located in NSW? if was perth i would be keen to have a look

Hi Zonk, yes I'm in the Sydney area unfortunately mate.

ABSOLUTELY BEAUTIFUL. I don't think those words could explain how sweet that looks. Good luck with the sale. I'm really hoping to find 1 in the condition this is in, when I sell my 32 next year.

Thanks Brad! The photos aren't bad but the car really deserves an inspection to be appreciated!

A few more pics that were taken most recently by Flippit Photography (car has RE30s on currently but will be sold with original R33 GTR rims as described above)

08-1.jpg

07-1.jpg

06-1.jpg

05-1.jpg

09-1.jpg

02-1.jpg

Just when I thought I've made up my mind to keep my GTST this pops up!

I'm torn again, this would be perfect for what I would want.. I'm going to have a good think and may contact you about this.

I have seen this car in the flesh it is an immaculate example of a GTR

Just when I thought I've made up my mind to keep my GTST this pops up!

I'm torn again, this would be perfect for what I would want.. I'm going to have a good think and may contact you about this.

I have seen this car in the flesh it is an immaculate example of a GTR

No worries Dave. Thanks for the compliment :thumbsup:

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Please do not connect it to your manifold. If you do, as GTS suggested please record the lot in 4K with good mics attached.   On the factory Skyline, there's a upside down pipe that allows it to breathe, looks like this   
    • For me I'd need some serious justification for why it has blown out.  Have you questioned him on it?  To be honest if you didn't question him right from the get-go on the first invoice that was already way over the initial quote and then you've (presumably) then paid another $1375 on top of the first invoice, then you're pushing shit uphill to get a favourable result now... It was years ago I last got an engineer out but it was around $450-$550 per visit.  That was just to inspect each progress point he gave me for the project.  Is he just doing progress inspections or is he providing engineering diagrams, technical assistance, etc??  If he's not, he's a filthy rip off merchant.  If the $3100 is the final sign off then you need to cop it on the chin, pay it and move on.  If it's not, piss him off and get a new one.  Not many Jeeps I'd value at $10K full stop let alone just engineering fees on a written off, half actual value WOVR Jeep....
    • Oh, yes. If you connected it to the manifold your first drive would be very eventful. Very shit. Very interesting. Perhaps take a video if you feel the need to see. Terminating the breather at the top of the bellhousing is normal/stock. Some gearbox lubes (hello Redline Shockproof) like to foam up a bit and require the breather to be extended up higher, so you don't get spots of smurf jizz staining the floor under your car. Mine is thus right up behind the head. Make sure you fit a u-bend at the top so it points back downward so that dirt and schmutz has a harder time getting into it.
    • Cheers for the replies. So i don't connect it to the manifold I just run the hose high up on the firewall?
    • It doesn't really answer your question...but is the head unit full android or just android auto, are you happy with how quickly it boots and responds, and do you have a link?  If we can identify good Android alternatives it will really help people stuck with Japanese screens. Did it have a separate reverse camera input so you would replace the factory one, or are you just going without now...that would be a pretty big steps back. And finally, do you have a picture of the "wire" that you can't plug in? Most likely it is some sort of aerial that is not too important eg japanese traffic or am radio or something if you haven't noticed a functionality issue
×
×
  • Create New...