Jump to content
SAU Community

Recommended Posts

PM or call 0423 799 320 with any questions. Everything is ONO

RB25 Cam Covers $50 for the pair

RB25 Timing Belt Cover $25

33 Side Exit Exhaust (Great for track days) $100

High Mount Dump Pipe $50

Cam Angle Sensor $25

Malpassi Fuel Reg $40

38mm Dual Port Turbosmart BOV $150

Indicator and Wiper stalks $20 a side

33 Front Strut Brace $40

33 Radiator Air Guide $30

Cusco brake cylinder stopper $40

DSC_0312.jpg

DSC_0299.jpg

DSC_0298.jpg

DSC_0485.jpg

DSC_0481.jpg

DSC_0483.jpg

DSC_0480.jpg

DSC_0478.jpg

DSC_0477.jpg

Link to comment
https://www.sau.com.au/forums/topic/346064-wrecking-r33-rb25-parts-cheap/
Share on other sites

Clutch Fan $50

SAAS Racing Seat $125

RPM Racing Harness $50

Rear Tailights $100 for the pair

Front Guards $100 each

Boot $75

Rear Brake Calipers $100 for the pair

Hand Brake cables $75

Almost new Pineapple Bushes $50

New Alternator $100

RB25 Throttle body $50

Also have heaps of interior bits and pieces

Alternator.jpg

StockThrottleBody.jpg

DSC_0303.jpg

RearTailLights.jpg

Will send PM - shotgun strut brace and fan if its in good nic...also do you have dash/cluster surround trim and handbrake/gearlever boots?

Does the fan have any cracks around the circular part in the middle (or anyewhere)?

Edit - Or not, PM inbox full :D

Edited by Pope
Will send PM - shotgun strut brace and fan if its in good nic...also do you have dash/cluster surround trim and handbrake/gearlever boots?

Does the fan have any cracks around the circular part in the middle (or anyewhere)?

Edit - Or not, PM inbox full :P

Fan has no cracks from what I have seen and both my and my mate have had a look, and I do have the dash cluster trim but not the handbrake or gearlover boots..

Edited by TJ_R33
Fan has no cracks from what I have seen and both my and my mate have had a look, and I do have the dash cluster trim but not the handbrake or gearlover boots..

Ok sweet, will grab that as well, can you PM a mobile or email? Should be able to come pick them up. Strut brace mine?

Ok sweet, will grab that as well, can you PM a mobile or email? Should be able to come pick them up. Strut brace mine?

Number is at the top of the page mate, when did you want to pick them up?

Sorry, reading fail - looked at bottom of post not top :P Just tired now, will try again tomorrow at a decent time :blink:

Probably on the weekend if I can, not sure which day ATM, can prolly do either. Don't suppose you have an old radiator lieing around...mine blew on way to work today ;)

Sorry, reading fail - looked at bottom of post not top :) Just tired now, will try again tomorrow at a decent time :)

Probably on the weekend if I can, not sure which day ATM, can prolly do either. Don't suppose you have an old radiator lieing around...mine blew on way to work today :(

I might still have my old one somewhere, I will have a look. I must have already sold the strut brace a few months ago mate cause I had a look for it tonight and couldnt find it, I could have sworn I say it the other day.

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 2 does "sort of" applies, maybe......but looking at what parts would be needed for the swap to get engineered, registered, and insured, and basically that's everything under the car, the modifications the make it legal would be problematic and horrendously expensive, all for a street car that just cruises around and hits a few twisty roads on the weekends Also, from looking at the NSW rules and Regs, with all modifications that is required just to make the car safe and not twist itself to pieces, and then actually get registered for street use, may still be impossible nowadays As for 1, when you add in a fresh engine, fresh transmission, rear cradle and diff, tailshaft, suspension, brakes, cooling, and all the other fabrication required, your probably looking at up to $100k to do it right, all for a 20 year old MX5 that is over engineered and you would never be able to actually use the power it has on the street, much like your beastie, which I love, but you actually track that thing and can use all of its powers in anger, in a safe environment  Hell, the old Bogan Cruise Ship had more power than I could use on the street, and in hindsight, I went a bit silly on that thing, it didn't really need the 500hp it had for what I actually used the car for, it was fun, but basically unusable on the street if you value your licence  As for cams, yeah, I'll probably book it in for them to get installed and tuned soonish, like next month after MX5 Mania are back at work....... and yes, I've already sent a email to bin the turbo quote and quote instead to install cams and a new Fluidampr balancer that will suit the 2.5 better than the OEM 2.0 balancer that is swapped over for the 2.5 install, as the balancer needs to get pulled to time the cams it's a while your in there sort of thing I did think a bit about flex fuel for a laugh, but being na, and no where really around locally anymore to get E85, I've binned that idea, so no sweet sweet corn smells are set for the car I wish E85 was more of a standard fuel, it's better for the environment, better for tuning, plus that sweet sweet smell we all love As for fitting in the family, that's not needed, as everyone in the family already owns a car that can seat 5 humans comfortably enough, the MX5 is "my toy" As for buying a car that is already built, nah, I would rather pick and choose my parts, I enjoy the process, and in the big picture, the additional cost is well worth the enjoyment, and the occasional frustration, I get out of doing it, albeit with other people spinning the spanners, and me, just paying the invoice 🤣
    • Excuse me, but 2) does apply 1) Would also apply if you consider how much is spent in the alternatives. Also there's the option of 3), buy one pre-built that you can put your family in (it's me, it's my car)   That said, I went on a ~500km drive the other day. I didn't use anything more adventurous than 3rd/4th gear at about ~3000RPM and 50% throttle and I was going as fast as anyone has any sense doing on a public road, with enough grip to the point where I didn't want to go any faster. I was obviously under the limit of the current car etc etc. MX5 with 2.5 N/A to achieve the same speed would be more fun for any road scenario. Maybe consider cams. I wouldn't boost it. The use case is just not there and it won't actually make the car more enjoyable unless you really do plan on wringing gears from 1st to 3rd (at least) at 100% WOT on a public road to 150+kmh.
    • Great if: 1. You had all of the money for everything else that is required  2. Lived in a country where you could actually do this and drive it legally on the road Sadly, neither applies to me As for the turbo, I am having second thoughts, mainly for engineering/registration legality reasons and insurance  Not saying I've finished doing stupid things that I probably should do to the MX5, but boost, and V8 engine swaps isn't on the cards Strange, but true 
    • I like this page, better than that silly turbo kit   https://v8roadsters.com/product-category/engine-conversions/engine-conversion-lsx/engine-conversion-lsx-nc/  
    • That would be my Shoei helmet
×
×
  • Create New...