Jump to content
SAU Community

Recommended Posts

I haven't had cars that have done way-out figures like the ones above...

but I must admit that I've been so concerned about several cars getting close to 200,000km, so I'd sell them.

That mentality I guess, is a carry-over from my parents saying pearls of wisdom like...

"There comes a time when repairs can cost more than maintenance" (with me thinking of buying their own Fiat 2300)

"Don't buy other people's problems" (whilst looking at a Monaro)

"If you can afford to run it, you can afford to buy it" (when I considered a Jag XJ-S)

"You'll kill yourself" (when I had my heart set on a used MG-B as my first car > got a new Datto 1600 instead)

:thanks: Mum and Dad

hahaha, good work done by your folks... Jag XJ-S nice car... know someone who has one that is pushing 600rwkw.

My old man used to have an old magna. That had done just over 40K before it started blowing smoke........lol......POS!!!

But seriously.....old nissan/Datsuns just go for ever. My mate had a 180b that had done over 400K. We used to flat change that thing no clutch all the time and just kept taking it. To the point when he bought a new car so we did all we could to kill the 180b to no avail. The gearbox finally gave way after endless 2nd gear limiter launches. Its funny....when you wanna blow an engine ya cant!

Edited by greensa14

My old man used to have an old magna. That had done just over 40K before it started blowing smoke........lol......POS!!!

But seriously.....old nissan/Datsuns just go for ever. My mate had a 180b that had done over 400K. We used to flat change that thing no clutch all the time and just kept taking it. To the point when he bought a new car so we did all we could to kill the 180b to no avail. The gearbox finally gave way after endless 2nd gear limiter launches. Its funny....when you wanna blow an engine ya cant!

and then the opposite when your not trying to blow an engine but you do... hahaha

Nobody mentioned the Volvo P1800 that has done well over 2.6 million miles, not kilometers, miles.

All high-mileage vehicles still traveling our nation's roads, however, must tip their rusty hats to this one, Irv Gordon's 1966 Volvo P1800 with 2.6 million miles under its belt-line. Gordon has been the only owner of this P1800 since it was purchased new in 1966. A 125-mile round trip daily commute and a penchant for regular maintenance got the car this far, and in 1998 it made the Guinness Book of World Records at just 1.69 million miles.
Edited by DivHunter

well to put in a GTR a mate of mine bought his 32 GTR in japan in about 1993 or so and brought it into aus. he's owned it ever since and has done over 200,000kms on it. and that car is immaculate. I would consider buying it if he wanted to sell.

I'm pretty sure there was a Taxi driver in Greece who had a Mercedes for 20+years and it did something rediculous like 2 or 3 million KM's without ever needing an engine/drivetrain replacement.

As far as I know, Mercedes now have this specific Merc in their museum now....

  • 1 year later...

Mate of mine had a 91 Toyota Camry 2.0L 4 cylinder, it done 550,000 Kms on the original engine and still going strong. In the end he traded it on a new car and the Toyota dealer kept it in the showroom to showcase Toyota's reliability.

well to put in a GTR a mate of mine bought his 32 GTR in japan in about 1993 or so and brought it into aus. he's owned it ever since and has done over 200,000kms on it. and that car is immaculate. I would consider buying it if he wanted to sell.

Just park it on Parramatta Road, it'll have 45,000km in no time lol

i know of a few people who have had cars with the clock on their second time around the clock.

i had a commodore that was an ex company car. was 12 months old (almost to the day) when i got it and had 80,000kms on it. my sister in law used to drive from gympie to noosa and back everyday for work (about a 130km round trip). she used to have a liberty but as the kms started racking up she started having problems with it so got a vx commodore. it has been pretty much hassle free other than a problem with the fuel pump.

if i had to choose between an import with 400,000kms on it or a commodore/falcon with the same, i'd probably take the aussie car.

good choice, my prelude has 33*,*** on it and it's on its fourth engine..... srsly.

mind you i don't know if the speedo still works.

Edited by tweety bird

My old work ute a 3.2L V6 rodeo had 410000 HARD km on it put a clutch in it at bout 280 but that was it i had 1.3t of brick rubble on its back few times dragged over 1700kg of structural steel on a big twin axle trailer countless times it had close to a tonne of tools on it fulltime as im a boilermaker/plumber so 2 lots of trade tools basically . It drove perfectly didnt blow smoke idled perfect and still went like the clappers did lose a lil power before we got rid of it though :worship: But it was serviced every 5000km as those motors have small oil journals apparently and gum up easily :thumbsup: Was heavy on juice though lol

my daily is a daewoo 1.5i. currently has around 312,000kms still with the original engine and gearbox (mainly highway km's from what I'm told). had it for the past 4 years and still going strong lol. the interior on the other hand hasn't held up as well.

I bought a KE30 corolla off original owner that had full service history, receipts of purchase ($4700 Brand new for car)

(First service was $31, Oil was $2) lol. Had original plates and owner had paperwork of every time it clicked over which was 7 times and now on 54,000 so 754,000km and all original box which feels awesome lol and original motor.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for sharing this, and BTW if your headlights are in good condition they are worth thousands....you might want to consider replacing them with brand new LED ones like this (https://www.nengun.com/78works/full-led-headlights-r32-skyline) and making enough profit to buy a house in Sydney
    • I'm not sure what sort of shops are nearby, but I'd expect any reasonable exhaust shop could put a cat in it that will not restrict the power that engine makes. Otherwise, if you want to remove it, short lengths that replace the cat are readily available online, search for "de-cat pipes" or "test pipes"  
    • Howdy friends, So another weird one today, I was looking into replacing some broken clips holding the front grille for the R32 GTR (part number 01553-03831), and noticed the brackets which are supposed to hold the grille in place were also missing 😑. I do recall seeing this issue many years ago, but didn't fix it at the time. A quick look on eBay and I was able to find the genuine brackets, along with all the screws which suited the headlights (part numbers 26042-08U05,26092-08U05). Happy days!....  Once they arrived however there was an extra nut in the packaging which implied that there should also be a bolt or a stud, and sure enough, after a bit of searching I found this thread from 2013, and @Ants clearly shows a stud should be present. Reading around a bit more, it's possible the headlights on my car are the "povo pack" headlights as mentioned by @funkymonkey in this thread way back in 2008. This could explain why the studs are missing on my set of headlights. Looking at the headlight diagram I wasn't able to see a suitable part number for the stud itself. The headlight did indeed have a recess that looked like it would accept a stud, but interestingly no thread or anything obvious how the stud would be affixed to the headlight, I suspect it may have been glued in, press fit, or melted into the plastic at the factory. Another member may be able to clarify if they happen to have a genuine set of N1 headlamps. The only thing we have to work with within the recess is a keyway which likely is there to prevent the stud from rotating within the recess. In any case, back to 3D printing, I put together a model which acts like a pug with a friction fit inside this recess, making use of the keyway so it doesn't rotate while tightening a bolt. Printing in TPU will allow it to slightly swell making a nice snug fit without cracking the part. I've designed the adaptor it to accept an 20 mm M6 bolt (stainless with a cap head in my case), as opposed to the standard M5 stud and I made use of the standard galvanised split washer that came with the genuine brackets from Nissan. Once the bolt and screws were all in place, giving the bracket a gentle shake gave the classic "shaking the car" feeling, very solid, which gives me confidence this is going to be able to hold on much better than the janky solution which seems to have been here for the past decade or so. Overall I'm really pleased with how this turned out and maybe there are more people out there running these headlights without a centre stud at all! Link to the freely available model on Printables: Click here Regards, Sean  
    • Hey everyone, This is my first post apart of the introduction. I tried searching a bit on the forum but couldn't really get a straight answer. I got the car to my mechanic as I felt it being weak. It seems that it was missing on two cylinders due to the injectors. I had all my injectors clean and the car runs much better. The mechanic also confirmed my suspicions that the cat is clogged and needs to be tackled asap. The cat rattles a bit and the hot exhaust warning frequently lights up when driving after getting the injectors clean. In my introduction I was asked about what modification I might be interested in and mentioned a cat delete. From what I was told, this is not really beneficial on the RB20DE and there are more cons than pros.  Could perhaps anyone give some suggestions on what the best course of action would be since the current cat is toast and needs to be removed/replaced anyway? I can also sometimes smell a strong smell of fuel, but I'm not sure if this is related.
    • Hope the cans went down well at least 
×
×
  • Create New...