Jump to content
SAU Community

Recommended Posts

as topic says, looking for a place to buy my rb26dett front cut from, more than likely going to go with Just Jap at this stage, seam to be a really good deal and is only about 5 hours from where i live.

i know forum rules are that you cant badmouth or activelly promote your own buisness but there is nothing againts sending me a PM if you have had a horror story from an import yard, or if you have had a great experiance and would recommend again.

Also anything that i should particularly be aware of? i allready have a full timing kit, water pump and N1 oil pump ordered, and im purchasing motor without turbo as im going to run a single.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/346689-best-place-to-buy-frontcuts-from/
Share on other sites

who ever you buy it from dont tell them if you are putting bigger turbo's or aftermarket anything on it or your warranty will be void.

just tell them you need it as a stock replacement for your GTR.

as topic says, looking for a place to buy my rb26dett front cut from, more than likely going to go with Just Jap at this stage, seam to be a really good deal and is only about 5 hours from where i live.

i know forum rules are that you cant badmouth or activelly promote your own buisness but there is nothing againts sending me a PM if you have had a horror story from an import yard, or if you have had a great experiance and would recommend again.

Also anything that i should particularly be aware of? i allready have a full timing kit, water pump and N1 oil pump ordered, and im purchasing motor without turbo as im going to run a single.

Cheers

5 hrs away where do you live, try sss at girraween they usally have 26s instock and if you have problem with engine they will swap it, most of there engines they drive in japan for them selfs to see if there stuffed, remember cheaper isn,t always cheaper

as topic says, looking for a place to buy my rb26dett front cut from, more than likely going to go with Just Jap at this stage, seam to be a really good deal and is only about 5 hours from where i live.

i know forum rules are that you cant badmouth or activelly promote your own buisness but there is nothing againts sending me a PM if you have had a horror story from an import yard, or if you have had a great experiance and would recommend again.

Also anything that i should particularly be aware of? i allready have a full timing kit, water pump and N1 oil pump ordered, and im purchasing motor without turbo as im going to run a single.

Cheers

im asuming your in wa. i used kyp in welshpool they were great they did a compression test for me and also started it up for me. speak to ben if you go there he doesnt do it for the money he does it for the love of cars

i know forum rules are that you cant badmouth or activelly promote your own buisness but there is nothing againts sending me a PM if you have had a horror story from an import yard, or if you have had a great experiance and would recommend again.

i don't think too many people are going to get on here and bad mouth there own business...haha

i've gotten a few motors off SSS and always found them to be pretty good, but as you say they have no good 26's... i've bought a bit of gear of just jap and always found them to be pretty good.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, you are right. It seems easier and more reasonable to boost the engine. And as you said the blocks are very similar but the cylinder bores are different.
    • Sound logic, but in actuality way more illegal than just having the wrong pipe. Normally, doing something like that would be forgery. Meaning you may have certain documentation for vehicle parts, but the actual parts are different ones and you just assign them the numbers and badging from the documents. But nevermind that. Nonetheless, I AM curious if this pipe was ever made by any official manufacturer this way, because I honestly am not familiar with this pipe layout and shape. As I will be putting on the HKS Silent Hi Power once my exhaust gaskets arrive, as long as it sounds right I will just roll with this front pipe. I can always order the actual Mines part if I run into legal issues. It would be an unnecessary expense as there is lots of other problems I have on this car as of now.
    • So, weld a plate with the Mines logo laser cut into it, onto it. Instant Mines pipes, whether they were or weren't originally.
    • I don't know if the blocks are "the same". They will be very very similar. Obviously, either the bore or the stroke is going to be bigger on the 20. If the bore is bigger, then the 18 head is unlikely to fit properly. If the bore is the same, then you can almost certainly fit the CA18 head, but there migth be a few fun things you have to do to make water galleries (or other things) line up properly. Or... it could just be real easy. Is it worth the effort? Almost certainly not. You can make nearly as much power on a 2 valv ehead as you can on a 4 valve. There's not any "magic" in a 4 valve head.
    • Yes, me too!!!!  I need to find a something that has all the abbreviations for what these cars have LOL
×
×
  • Create New...