Jump to content
SAU Community

Recommended Posts

A new thread just for these two parts only.

Gearbox has been extracted from my car. I'm asking $1200ono for the gearbox includes the crossmember thing to hold it to the car. Can throw in a Exedy heavy duty clutch which is still healthy for $1500 total. Box was pretty nice condition. Once warmed up, there was no biting. Second gear was always abit sticky when cold and just a tad bit harder than other gears.

The motor is also for sale.

It does not include the turbo or turbo manifold, the TPS, the bov with crossover pipe. I can provide it with the parts you need. With everything infront of the firewall, were talking engine loom, nismo 550(or 555cc) injectors, intake manifold throttle body(minus tps), all the pumps and alternators, ill let the motor go for $1500ono. I can strip things off it to provide a cheaper block. I need this gone. I can deliver the parts anywhere in sydney for $150 or feel free to come pick it up.

Both parts have genuine 119xxxkm on it. Headgasket isnt leaking, no noises from the motor, always serviced by my self(oils and what not).

I need this stuff gone really bad, I will NOT refuse reasonable offers. Please someone take these parts from me.

I'm 5 mins from Parramatta.

Private messages arent working for me, my email/msn is [email protected]. Post here before emailing me or adding me so I can verify who you are. Cheers.

Edited by SargeRX8
Link to comment
https://www.sau.com.au/forums/topic/346718-rb25det-motor-r33-gearbox-fs/
Share on other sites

  • 3 weeks later...

hi

im wonderign whats the lowest price u go for the gear box ?

and were located so i know if i need pik up or post... thanx

A new thread just for these two parts only.

Gearbox has been extracted from my car. I'm asking $1200ono for the gearbox includes the crossmember thing to hold it to the car. Can throw in a Exedy heavy duty clutch which is still healthy for $1500 total. Box was pretty nice condition. Once warmed up, there was no biting. Second gear was always abit sticky when cold and just a tad bit harder than other gears.

The motor is also for sale.

It does not include the turbo or turbo manifold, the TPS, the bov with crossover pipe. I can provide it with the parts you need. With everything infront of the firewall, were talking engine loom, nismo 550(or 555cc) injectors, intake manifold throttle body(minus tps), all the pumps and alternators, ill let the motor go for $1500ono. I can strip things off it to provide a cheaper block. I need this gone. I can deliver the parts anywhere in sydney for $150 or feel free to come pick it up.

Both parts have genuine 119xxxkm on it. Headgasket isnt leaking, no noises from the motor, always serviced by my self(oils and what not).

I need this stuff gone really bad, I will NOT refuse reasonable offers. Please someone take these parts from me.

I'm 5 mins from Parramatta.

Private messages arent working for me, my email/msn is [email protected]. Post here before emailing me or adding me so I can verify who you are. Cheers.

Hi do you still have the gearbox and what do you mean biting and sticky when cold i will also send a copy of this via your email adress call me on 0244435198 if you wish thanks

Sam.......

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I hope one day I can do it like you. Your engine looks great.
    • If there's nothing else I can do I'll probably do something like that Someone on the internet said that ca20s and ca18 engine blocks are the same and that you can use a ca20 engine block and put ca18det parts to make a ca20det Do you think this is possible or will it damage the engine?
    • Yeah, I did some research and found out that some things are different.
    • Makes sense, thanks! Consider me very impressed. And I very much appreciate the effort in documentating all of it. You'd be surprised, or maybe not, how many people this reaches who search for things online. Anyways, I shall continue to read all of it, understand maybe a quarter, and hope that some of it sticks if I ever end up in a situation where it's relevant
    • 'Did' work on them is more accurate ~ on the R31 Skyline forum, you can spot me as 'Solder'... I've written quite a bit about the 4R01 boxes there, and I ended up reverse-engineering the older TCU type operations, so we could fudge a custom TCU to pull off other tricks...and like all things, when you do it a lot, see the failure patterns, have to find parts etc etc, your head ends up filled with whys and wherefores... there was a reason Nissan went with these in more than 60models over 16+ years... all in all, the JR401E based design is an interesting study, as Nissan changed things over the years in a never ending battle against them lunching on themselves <grin>...by the time the RE4R01A rev.C came out (often referred to as RE4R01B), they'd more or less perfected the design...  
×
×
  • Create New...