Jump to content
SAU Community

Recommended Posts

hey guys, a silly question but need help. Thinkin of going a 3L bottom end and have a spare r33 gts4 gearbox. Form what i can gather they are the same strenght as a GTR box but different ratio. Now my question is, can i use it on a RB30 and what tailshaft/diff would i need ? Or just stick with the normal gtst box ?

Any help is appreciated

Link to comment
https://www.sau.com.au/forums/topic/346728-r33-gts4/
Share on other sites

What car? I'm assuming is a RWD platform as you talk about re-using your gtst gearbox...

If it's an R32 GTSt, I killed my stock box very quickly after chucking the 3L in.

If it's an R33 GTSt, then your box is already as strong as a GTR box as they are pretty much the same internals (I upgraded to an RB25DET box, including the box and custom tailshaft good for 800Nm, and some other bits like slave cylinders, pivot ball etc, cost me nearly $2.5k and I did the work myself).

Using a 4WD gearbox in a RWD application requires some cutting and shutting.. easier to use an R33 RB25DET box.

Link to comment
https://www.sau.com.au/forums/topic/346728-r33-gts4/#findComment-5584951
Share on other sites

What car? I'm assuming is a RWD platform as you talk about re-using your gtst gearbox...

If it's an R32 GTSt, I killed my stock box very quickly after chucking the 3L in.

If it's an R33 GTSt, then your box is already as strong as a GTR box as they are pretty much the same internals (I upgraded to an RB25DET box, including the box and custom tailshaft good for 800Nm, and some other bits like slave cylinders, pivot ball etc, cost me nearly $2.5k and I did the work myself).

Using a 4WD gearbox in a RWD application requires some cutting and shutting.. easier to use an R33 RB25DET box.

will be rwd 33 and i have a spare gts4 which im stripping. need to know if i should keep the gbox or sell it. dont have a 33gtst box though. i would just use that...like u said.

Link to comment
https://www.sau.com.au/forums/topic/346728-r33-gts4/#findComment-5585097
Share on other sites

  • 2 weeks later...

the trouble there is r33 gts4's are pretty rare, and the demand for that gbox wouldn't be strong. even gtr boxes are cheap as chips so i wouldnt expect much for that one. it probably isn't expensive to have the transfer case removed and sealed off so i'd seriously look at that, given that its got the same internals as the 2wd turbo box anyway so you'd have a good gearbox for little expense.

Link to comment
https://www.sau.com.au/forums/topic/346728-r33-gts4/#findComment-5602729
Share on other sites

  • 1 year later...

I have a stock R33 gtst gear box, Will strip it out for the right price. pm me if your intrested mate-

No one has ever confirmed the stenght of internals - Im planning to run 300+ kw through mine- Been N/A up untill now.

A few people on here have put plenty of poke through them with no worries, depends how you treat it though- 8k dumps and smashing gears isent goign to be good for any stock box.

Link to comment
https://www.sau.com.au/forums/topic/346728-r33-gts4/#findComment-6506817
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wouldn't be concerned at all, other than to suggest having them flow tested when you receive them to confirm they are reasonably similar, and then put the highest to lowest flowing ones in cylinder 6,1,5,2,4,3
    • I’m only posting this cause I thought I had seen a bad review on these somewhere before. Any feedback? Would you guys recommend that if I do buy these I send em to RC to have em checked before installing. Or any other suggestions?   https://www.ebay.com/itm/114009965865?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JDl-15yLQ8C&sssrc=4429486&ssuid=QTzlFXB1S-S&var=&widget_ver=artemis&media=COPY
    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
×
×
  • Create New...