Rb25Neo, Gcg Highflow. Safe On Stock Ecu?

[beRwick_GTRage]

car is an r32 rb25neo.

i have an rb25 gcg highflow (2871r)

just wanted to know if its safe to run it on 12psi with a standard rb25neo ecu?

[R31Nismoid]

Personally I wouldn't.

Just run it off the factory actuator until you are ready to get it tuned. Its highly likely to trip the ECU into R&R mode anyway which will make it a pig to drive. 7psi, it'll be fine.

You need injectors and a larger AFM to support that turbo (and a tune obviously)

[KiwiRS4T]

Best keep the boost down til you get a Nistune chip (or other aftermarket ecu). Then you can run 12psi but better still get Z32 afm and bigger and run more boost!!

[GTScotT]

+1 will be fine on stock boost and shit a brick on anything more.

Need: Z32, injectors, fuel pump, nistune.

[beRwick_GTRage]

ah k

ive got it running off the stock actuator, 12psi is as low as i can go.

you sure ill need z32 and injectors, if i do end up getting it tuned?

ill have to go back to the stock turbo, dont want to spend anymore money on this car.